# Gmsh 2.10

## Table of Contents

- Gmsh
- Obtaining Gmsh
- Copying conditions
- 1 Overview
  - 1.1 Geometry: geometrical entity definition
  - 1.2 Mesh: finite element mesh generation
  - 1.3 Solver: external solver interface
  - 1.4 Post-processing: scalar, vector and tensor field visualization
  - 1.5 What Gmsh is pretty good at ...
  - 1.6 ... and what Gmsh is not so good at
  - 1.7 Bug reports
- 2 How to read this reference manual?
  - 2.1 Syntactic rules used in the manual
- 3 Running Gmsh on your system
  - 3.1 Interactive mode
  - 3.2 Non-interactive mode
  - 3.3 Command-line options
  - 3.4 Mouse actions
  - 3.5 Keyboard shortcuts
- 4 General tools
  - 4.1 Comments
  - 4.2 Expressions
    - 4.2.1 Floating point expressions
    - 4.2.2 Character expressions
    - 4.2.3 Color expressions
  - 4.3 Operators
  - 4.4 Built-in functions
  - 4.5 User-defined macros
  - 4.6 Loops and conditionals
  - 4.7 General commands
  - 4.8 General options
- 5 Geometry module
  - 5.1 Geometry commands
    - 5.1.1 Points
    - 5.1.2 Lines
    - 5.1.3 Surfaces
    - 5.1.4 Volumes
    - 5.1.5 Extrusions
    - 5.1.6 Transformations
    - 5.1.7 Miscellaneous
  - 5.2 Geometry options
- 6 Mesh module
  - 6.1 Choosing the right unstructured algorithm
  - 6.2 Elementary vs. physical entities
  - 6.3 Mesh commands
    - 6.3.1 Specifying mesh element sizes
    - 6.3.2 Structured grids
    - 6.3.3 Miscellaneous
  - 6.4 Mesh options
- 7 Solver module
  - 7.1 Solver options
- 8 Post-processing module
  - 8.1 Post-processing commands
  - 8.2 Post-processing plugins
  - 8.3 Post-processing options
- 9 File formats
  - 9.1 MSH ASCII file format
  - 9.2 MSH binary file format
  - 9.3 Node ordering
    - 9.3.1 Low order elements
    - 9.3.2 High order elements
  - 9.4 Legacy formats
    - 9.4.1 MSH file format version 1.0 (Legacy)
    - 9.4.2 POS ASCII file format (Legacy)
    - 9.4.3 POS binary file format (Legacy)
- Appendix A Tutorial
  - A.1 t1.geo
  - A.2 t2.geo
  - A.3 t3.geo
  - A.4 t4.geo
  - A.5 t5.geo
  - A.6 t6.geo
  - A.7 t7.geo
  - A.8 t8.geo
  - A.9 t9.geo
  - A.10 t10.geo
  - A.11 t11.geo
  - A.12 t12.geo
  - A.13 t13.geo
  - A.14 t14.geo
  - A.15 t15.geo
- Appendix B Options
  - B.1 General options list
  - B.2 Geometry options list
  - B.3 Mesh options list
  - B.4 Solver options list
  - B.5 Post-processing options list
- Appendix C Compiling the source code
- Appendix D Information for developers
  - D.1 Source code structure
  - D.2 Coding style
  - D.3 Adding a new option
- Appendix E Frequently asked questions
  - E.1 The basics
  - E.2 Installation problems
  - E.3 General questions
  - E.4 Geometry module
  - E.5 Mesh module
  - E.6 Solver module
  - E.7 Post-processing module
- Appendix F Version history
- Appendix G Copyright and credits
- Appendix H License
- Concept index
- Syntax index

Next: Obtaining Gmsh, Previous: (dir), Up: (dir)

## Gmsh

Christophe Geuzaine and Jean-François Remacle

Gmsh is an automatic 3D finite element mesh generator with build-in pre- and post-processing facilities. This is the Gmsh Reference Manual for Gmsh 2.10 (27 July 2015).

--- The Detailed Node Listing ---

Overview

How to read this reference manual?

Running Gmsh on your system

General tools

Expressions

Geometry module

Geometry commands

Mesh module

Mesh commands

Solver module

Post-processing module

File formats

Legacy formats

Tutorial

Options

Information for developers

Frequently asked questions

Next: Copying conditions, Previous: Top, Up: Top

## Obtaining Gmsh

The source code and various pre-compiled versions of Gmsh (for Windows, Mac and Unix) can be downloaded from http://geuz.org/gmsh/. Gmsh is also directly available in pre-packaged form in various Linux and BSD distributions (Debian, Ubuntu, FreeBSD, ...).

If you use Gmsh, we would appreciate that you mention it in your work by citing the following paper: “C. Geuzaine and J.-F. Remacle, Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities. International Journal for Numerical Methods in Engineering, Volume 79, Issue 11, pages 1309-1331, 2009”. A preprint of that paper as well as other references and the latest news about Gmsh development are available on http://geuz.org/gmsh/.

Next: Overview, Previous: Obtaining Gmsh, Up: Top

## Copying conditions

Gmsh is “free software”; this means that everyone is free to use it and to redistribute it on a free basis. Gmsh is not in the public domain; it is copyrighted and there are restrictions on its distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of Gmsh that they might get from you.

Specifically, we want to make sure that you have the right to give away copies of Gmsh, that you receive source code or else can get it if you want it, that you can change Gmsh or use pieces of Gmsh in new free programs, and that you know you can do these things.

To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies of Gmsh, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights.

Also, for our own protection, we must make certain that everyone finds out that there is no warranty for Gmsh. If Gmsh is modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation.

The precise conditions of the license for Gmsh are found in the General Public License that accompanies the source code (see License). Further information about this license is available from the GNU Project webpage http://www.gnu.org/copyleft/gpl-faq.html. Detailed copyright information can be found in Copyright and credits.

If you want to integrate parts of Gmsh into a closed-source software, or want to sell a modified closed-source version of Gmsh, you will need to obtain a different license. Please contact us directly for more information.

Next: How to read this manual?, Previous: Copying conditions, Up: Top

## 1 Overview

Gmsh is a three-dimensional finite element grid generator with a build-in CAD engine and post-processor. Its design goal is to provide a fast, light and user-friendly meshing tool with parametric input and advanced visualization capabilities.

Gmsh is built around four modules: geometry, mesh, solver and post-processing. All geometrical, mesh, solver and post-processing instructions are prescribed either interactively using the graphical user interface (GUI) or in text files using Gmsh's own scripting language. Interactive actions generate language bits in the input files, and vice versa. This makes it possible to automate all treatments, using loops, conditionals and external system calls. A brief description of the four modules is given hereafter.

Next: Mesh, Previous: Overview, Up: Overview

### 1.1 Geometry: geometrical entity definition

Gmsh uses a boundary representation (“BRep”) to describe geometries. Models are created in a bottom-up flow by successively defining points, oriented lines (line segments, circles, ellipses, splines, ...), oriented surfaces (plane surfaces, ruled surfaces, triangulated surfaces, ...) and volumes. Groups of geometrical entities (called “physical groups”) can also be defined, based on these elementary geometric entities. Gmsh's scripting language allows all geometrical entities to be fully parametrized.

Next: Solver, Previous: Geometry, Up: Overview

### 1.2 Mesh: finite element mesh generation

A finite element mesh is a tessellation of a given subset of the three-dimensional space by elementary geometrical elements of various shapes (in Gmsh's case: lines, triangles, quadrangles, tetrahedra, prisms, hexahedra and pyramids), arranged in such a way that if two of them intersect, they do so along a face, an edge or a node, and never otherwise. All the finite element meshes produced by Gmsh are considered as “unstructured”, even if they were generated in a “structured” way (e.g., by extrusion). This implies that the elementary geometrical elements are defined only by an ordered list of their nodes but that no predefined order relation is assumed between any two elements.

The mesh generation is performed in the same bottom-up flow as the geometry creation: lines are discretized first; the mesh of the lines is then used to mesh the surfaces; then the mesh of the surfaces is used to mesh the volumes. In this process, the mesh of an entity is only constrained by the mesh of its boundary. For example, in three dimensions, the triangles discretizing a surface will be forced to be faces of tetrahedra in the final 3D mesh only if the surface is part of the boundary of a volume; the line elements discretizing a curve will be forced to be edges of tetrahedra in the final 3D mesh only if the curve is part of the boundary of a surface, itself part of the boundary of a volume; a single node discretizing a point in the middle of a volume will be forced to be a vertex of one of the tetrahedra in the final 3D mesh only if this point is connected to a curve, itself part of the boundary of a surface, itself part of the boundary of a volume. This automatically assures the conformity of the mesh when, for example, two surfaces share a common line. But this also implies that the discretization of an “isolated” (n-1)-th dimensional entity inside an n-th dimensional entity does not constrain the n-th dimensional mesh—unless it is explicitly told to do so (see Miscellaneous mesh commands). Every meshing step is constrained by a “size field” (sometimes called “characteristic length field”), which prescribes the desired size of the elements in the mesh. This size field can be uniform, specified by values associated with points in the geometry, or defined by general “fields” (for example related to the distance to some boundary, to a arbitrary scalar field defined on another mesh, etc.).

For each meshing step, all structured mesh directives are executed first, and serve as additional constraints for the unstructured parts 1.

Next: Post-processing, Previous: Mesh, Up: Overview

### 1.3 Solver: external solver interface

External solvers can be interfaced with Gmsh through Unix or TCP/IP sockets, which permits to modify solver parameters, launch external computations and process the results directly from within Gmsh's post-processing module. The default solver interfaced with Gmsh is GetDP (http://geuz.org/getdp/). Examples on how to interface other solvers are available in the source distribution (in the utils/solvers 2 directory).

Next: What Gmsh is pretty good at, Previous: Solver, Up: Overview

### 1.4 Post-processing: scalar, vector and tensor field visualization

Gmsh can load and manipulate multiple post-processing scalar, vector or tensor maps along with the geometry and the mesh. Scalar fields are represented by iso-value lines/surfaces or color maps, while vector fields are represented by three-dimensional arrows or displacement maps. Post-processing functions include section computation, offset, elevation, boundary and component extraction, color map and range modification, animation, vector graphic output, etc. All the post-processing options can be accessed either interactively or through the input script files. Scripting permits to automate all post-processing operations, as for example to create animations. User-defined operations can also be performed on post-processing views through dynamically loadable plugins.

Next: and what Gmsh is not so good at, Previous: Post-processing, Up: Overview

### 1.5 What Gmsh is pretty good at ...

Here is a tentative list of what Gmsh does best:

- quickly describe simple and/or “repetitive” geometries, thanks to user-defined macros, loops, conditionals and includes (see User-defined macros, Loops and conditionals, and General commands);
- parametrize these geometries. Gmsh's scripting language enables all commands and command arguments to depend on previous calculations (see Expressions, and Geometry commands);
- generate 1D, 2D and 3D simplicial (i.e., using line segments, triangles and tetrahedra) finite element meshes for CAD models in their native format (without translations) when linked with the appropriate CAD kernel (see Mesh module);
- specify target element sizes accurately. Gmsh provides several mechanisms to control the size of the elements in the final mesh: through interpolation from sizes specified at geometry points or using flexible mesh size fields (see Mesh commands);
- create simple extruded geometries and meshes (see Geometry commands, and Mesh commands);
- interact with external solvers through a simple client-server architecture (see Solver module);
- visualize and export computational results in a great variety of ways. Gmsh can display scalar, vector and tensor datasets, perform various operations on the resulting post-processing views (see Post-processing module), can export plots in many different formats (see General options list), and can generate complex animations (see General tools, and t8.geo);
- run on low end machines and/or machines with no graphical interface. Gmsh can be compiled with or without the GUI (see Compiling the source code), and all versions can be used either interactively or directly from the command line (see Running Gmsh on your system);
- configure your preferred options. Gmsh has a large number of configuration options that can be set interactively using the GUI, scattered inside command files, changed on the fly in scripts, set in per-user configuration files, or specified on the command-line (see Running Gmsh on your system and Options);
- and do all the above on various platforms (Windows, Mac and Unix), for free (see Copying conditions), using simple script files and/or a small but powerful GUI.

Next: Bug reports, Previous: What Gmsh is pretty good at, Up: Overview

### 1.6 ... and what Gmsh is not so good at

As of version 2.8, here are some known weaknesses of Gmsh:

- the BRep approach for describing geometries can become inconvenient/inefficient for large models. For complex models, or if you want to use a solid-modeler approach, you should link Gmsh with an external CAD kernel and import native files directly. (The binary versions available on http://geuz.org/gmsh/ are linked with the free CAD kernel OpenCASCADE, which enables native BREP import as well as STEP and IGES import.)
- Gmsh's internal CAD engine is fairly limited: it only handles simple primitives and does not perform any complex geometrical operations (e.g. no calculation of intersections). For such features you should link Gmsh with an external CAD kernel (see above).
- Gmsh is not a multi-bloc mesh generator: all meshes produced by Gmsh are conforming in the sense of finite element meshes;
- Gmsh's user interface is only exposing a limited number of the available features, and many aspects of the interface could be enhanced (especially manipulators).
- Gmsh's scripting language is fairly limited, providing only very crude loop controls and user-defined macros, with no local variables.
- there is no global “undo” capability. You will often need to edit a text file to correct mistakes.

If you have the skills and some free time, feel free to join the project: we gladly accept any code contributions (see Information for developers) to remedy the aforementioned (and all other) shortcomings!

Previous: and what Gmsh is not so good at, Up: Overview

### 1.7 Bug reports

If you think you have found a bug in Gmsh, you can report it by email to the public Gmsh mailing list at gmsh@geuz.org, or file it directly into our bug tracking database at https://geuz.org/trac/gmsh/report 3. Please send as precise a description of the problem as you can, including sample input files that produce the bug. Don't forget to mention both the version of Gmsh and the version of your operation system (see Command-line options to see how to get this information).

See Frequently asked questions, and the bug tracking system to see which problems we already know about.

Next: Running Gmsh on your system, Previous: Overview, Up: Top

## 2 How to read this reference manual?

Gmsh can be used at three levels:

1. as a stand-alone graphical program, driven by an interactive graphical user interface (GUI);
2. as a stand-alone script-driven program;
3. as a library.

You can skip most of this reference manual if you only want to use Gmsh at the first level (i.e., interactively with the GUI). Just read the next chapter (see Running Gmsh on your system) to learn how to launch Gmsh on your system, then go experiment with the GUI and the tutorial files (see Tutorial) provided in the distribution. Screencasts that show how to use the GUI are available here: http://geuz.org/gmsh/screencasts/.

The aim of the reference manual is to explain everything you need to use Gmsh at the second level, i.e., using the built-in scripting language. A Gmsh script file is an ASCII text file that contains instructions in Gmsh's built-in scripting language. Such a file is interpreted by Gmsh's parser, and can be given any extension (or no extension at all). By convention, Gmsh uses the `.geo` extension for geometry scripts, and the `.pos` extension for parsed post-processing datasets. Once you master the tutorial (read the source files: they are heavily commented!), start reading chapter General tools, then proceed with the next four chapters, which detail the syntax of the geometry, mesh, solver and post-processing scripting commands. You will see that most of the interactive actions in the GUI have a direct equivalent in the scripting language. If you want to use Gmsh as a pre- or post-processor for your own software, you will also want to learn about the non-scripting input/output files that Gmsh can read/write. In addition to Gmsh's native “MSH” file format (see File formats), Gmsh can read/write many standard mesh files, depending on how it was built: check the `File->Save As' menu for a list of available formats.

Finally, to use Gmsh at the third level (i.e., to link the Gmsh library with your own code), you will need to learn the internal Gmsh Application Programming Interface (API). No complete documentation of this API is available yet; a good starting point is Source code structure, which gives a short introduction to Gmsh's internal source code structure. Then have a look e.g. at the examples in the utils/api_demos 4 directory in the source code. To build the library see the instructions in Compiling the source code and in the top-level README.txt file in the source distribution.

Previous: How to read this manual?, Up: How to read this manual?

### 2.1 Syntactic rules used in the manual

Here are the rules we tried to follow when writing this reference manual. Note that metasyntactic variable definitions stay valid throughout the manual (and not only in the sections where the definitions appear).

1. Keywords and literal symbols are printed like `this`.
2. Metasyntactic variables (i.e., text bits that are not part of the syntax, but stand for other text bits) are printed like this.
3. A colon (`:`) after a metasyntactic variable separates the variable from its definition.
4. Optional rules are enclosed in `<` `>` pairs.
5. Multiple choices are separated by `|`.
6. Three dots (...) indicate a possible (multiple) repetition of the preceding rule.

Next: General tools, Previous: How to read this manual?, Up: Top

## 3 Running Gmsh on your system

Next: Non-interactive mode, Previous: Running Gmsh on your system, Up: Running Gmsh on your system

### 3.1 Interactive mode

To launch Gmsh in interactive mode, just double-click on the Gmsh icon, or type

         > gmsh

at your shell prompt in a terminal. This will open the main Gmsh window, with a tree-like menu on the left, a graphic area on the right, and a status bar at the bottom. (You can detach the tree menu using `Window->Attach/Detach Menu'.)

To open the first tutorial file (see Tutorial), select the `File->Open' menu, and choose t1.geo 5. When using a terminal, you can specify the file name directly on the command line, i.e.:

         > gmsh t1.geo

To perform the mesh generation, go to the mesh module (by selecting `Mesh' in the tree) and choose the dimension (`1D' will mesh all the lines; `2D' will mesh all the surfaces—as well as all the lines if `1D' was not called before; `3D' will mesh all the volumes—and all the surfaces if `2D' was not called before). To save the resulting mesh in the current mesh format click on `Save', or select the appropriate format and file name with the `File->Save As' menu. The default mesh file name is based on the name of the current active model, with an appended extension depending on the mesh format6.

To create a new geometry or to modify an existing geometry, select 'Geometry' in the tree. For example, to create a spline, select `Elementary', `Add', `New' and `Spline'. You will then be asked to select a list of points, and to type `e` to finish the selection (or `q` to abort it). Once the interactive command is completed, a text string is automatically added at the end of the current script file. You can edit the script file by hand at any time by pressing the `Edit' button in the `Geometry' menu and then reloading the model by pressing `Reload'. For example, it is often faster to define variables and points directly in the script file, and then use the GUI to define the lines, the surfaces and the volumes interactively.

Several files can be loaded simultaneously in Gmsh. When specified on the command line, the first one defines the active model and the others are `merged' into this model. You can merge such files with the `File->Merge' menu. For example, to merge the post-processing views contained in the files view1.pos 7 and view5.msh together with the geometry of the first tutorial t1.geo, you can type the following command:

         > gmsh t1.geo view1.pos view5.msh

In the Post-Processing module (select `Post-Processing' in the tree), three items will appear, respectively labeled `A scalar map', `Nodal scalar map' and `Element 1 vector'. In this example the views contain several time steps: you can loop through them with the small “remote-control” icons in the status bar. A mouse click on the view name will toggle the visibility of the selected view, while a click on the arrow button on the right will provide access to the view's options.

Note that all the options specified interactively can also be directly specified in the script files. You can save the current options of the current active model with the `File->Save Model Options'. This will create a new option file with the same filename as the active model, but with an extra `.opt` extension added. The next time you open this model, the associated options will be automatically loaded, too. To save the current options as your default preferences for all future Gmsh sessions, use the `File->Save Options As Default' menu instead. Finally, you can also save the current options in an arbitrary file by choosing the `Gmsh options' format in `File->Save As'.

For more information about available options (and how to reset them to their default values), see Options. A full list of options with their current values is also available in the `Help->Current Options' menu.

Next: Command-line options, Previous: Interactive mode, Up: Running Gmsh on your system

### 3.2 Non-interactive mode

Gmsh can be run non-interactively in `batch' mode, without GUI8. For example, to mesh the first tutorial in batch mode, just type:

         > gmsh t1.geo -2

To mesh the same example, but with the background mesh available in the file bgmesh.pos 9, type:

         > gmsh t1.geo -2 -bgm bgmesh.pos

For the list of all command-line options, see Command-line options.

Next: Mouse actions, Previous: Non-interactive mode, Up: Running Gmsh on your system

### 3.3 Command-line options

Geometry options:

`-0`
  Output model, then exit
`-tol float`
  Set geometrical tolerance
`-match`
  Match geometries and meshes

Mesh options:

`-1, -2, -3`
  Perform 1D, 2D or 3D mesh generation, then exit
`-o file`
  Specify output file name
`-format string`
  Select output mesh format (auto (default), msh, msh1, msh2, unv, vrml, ply2, stl, mesh, bdf, cgns, p3d, diff, med, ...)
`-bin`
  Use binary format when available
`-refine`
  Perform uniform mesh refinement, then exit
`-part int`
  Partition after batch mesh generation
`-partWeight tri|quad|tet|prism|hex int`
  Weight of a triangle/quad/etc. during partitioning
`-saveall`
  Save all elements (discard physical group definitions)
`-parametric`
  Save vertices with their parametric coordinates
`-algo string`
  Select mesh algorithm (meshadapt, del2d, front2d, delquad, del3d, front3d, mmg3d, pack)
`-smooth int`
  Set number of mesh smoothing steps
`-order int`
  Set mesh order (1, ..., 5)
`-optimize[_netgen]`
  Optimize quality of tetrahedral elements
`-optimize_ho`
  Optimize high order meshes
`-ho_[min,max,nlayers]`
  High-order optimization parameters
`-optimize_lloyd`
  Optimize 2D meshes using Lloyd algorithm
`-clscale float`
  Set global mesh element size scaling factor
`-clmin float`
  Set minimum mesh element size
`-clmax float`
  Set maximum mesh element size
`-anisoMax float`
  Set maximum anisotropy (only used in bamg for now)
`-smoothRatio float`
  Set smoothing ration between mesh sizes at nodes of a same edge (only used in bamg)
`-clcurv`
  Automatically compute element sizes from curvatures
`-epslc1d`
  Set accuracy of evaluation of LCFIELD for 1D mesh
`-swapangle`
  Set the threshold angle (in degree) between two adjacent faces below which a swap is allowed
`-rand float`
  Set random perturbation factor
`-bgm file`
  Load background mesh from file
`-check`
  Perform various consistency checks on mesh
`-ignorePartBound`
  Ignore partitions boundaries

Post-processing options:

`-link int`
  Select link mode between views (0, 1, 2, 3, 4)
`-combine`
  Combine views having identical names into multi-time-step views

Solver options:

`-listen`
  Always listen to incoming connection requests
`-minterpreter string`
  Name of Octave interpreter
`-pyinterpreter string`
  Name of Python interpreter
`-run`
  Run ONELAB solver(s)

Display options:

`-n`
  Hide all meshes and post-processing views on startup
`-nodb`
  Disable double buffering
`-numsubedges`
  Set num of subdivisions for high order element display
`-fontsize int`
  Specify the font size for the GUI
`-theme string`
  Specify FLTK GUI theme
`-display string`
  Specify display
`-camera`
  Use camera mode view;
`-stereo`
  OpenGL quad-buffered stereo rendering (requires special graphic card)
`-gamepad`
  Use gamepad controller if available

Other options:

`-, -parse_and_exit`
  Parse input files, then exit
`-new`
  Create new model before merge next file
`-merge`
  Merge next files
`-open`
  Open next files
`-a, -g, -m, -s, -p`
  Start in automatic, geometry, mesh, solver or post-processing mode
`-pid`
  Print process id on stdout
`-watch pattern`
  Pattern of files to merge as they become available
`-bg file`
  Load background (image or PDF) file
`-v int`
  Set verbosity level
`-nopopup`
  Don't popup dialog windows in scripts
`-string "string"`
  Parse command string at startup
`-setnumber name value`
  Set constant number name=value
`-setstring name value`
  Set constant string name=value
`-option file`
  Parse option file at startup
`-convert files`
  Convert files into latest binary formats, then exit
`-version`
  Show version number
`-info`
  Show detailed version information
`-help`
  Show command line usage

Next: Keyboard shortcuts, Previous: Command-line options, Up: Running Gmsh on your system

### 3.4 Mouse actions

`Move`
  - Highlight the entity under the mouse pointer and display its properties
  - Resize a lasso zoom or a lasso (un)selection
`Left button`
  - Rotate
  - Select an entity
  - Accept a lasso zoom or a lasso selection
`Ctrl+Left button`
  Start a lasso zoom or a lasso (un)selection
`Middle button`
  - Zoom
  - Unselect an entity
  - Accept a lasso zoom or a lasso unselection
`Ctrl+Middle button`
  Orthogonalize display
`Right button`
  - Pan
  - Cancel a lasso zoom or a lasso (un)selection
  - Pop-up menu on post-processing view button
`Ctrl+Right button`
  Reset to default viewpoint

For a 2 button mouse, Middle button = Shift+Left button.

For a 1 button mouse, Middle button = Shift+Left button, Right button = Alt+Left button.

Previous: Mouse actions, Up: Running Gmsh on your system

### 3.5 Keyboard shortcuts

(On Mac Ctrl is replaced by Cmd (the `Apple key') in the shortcuts below.)

`Left arrow`
  Go to previous time step
`Right arrow`
  Go to next time step
`Up arrow`
  Make previous view visible
`Down arrow`
  Make next view visible
`0`
  Reload project file
`1 or F1`
  Mesh lines
`2 or F2`
  Mesh surfaces
`3 or F3`
  Mesh volumes
`Escape`
  Cancel lasso zoom/selection, toggle mouse selection ON/OFF
`g`
  Go to geometry module
`m`
  Go to mesh module
`p`
  Go to post-processing module
`s`
  Go to solver module
`Shift+a`
  Bring all windows to front
`Shift+g`
  Show geometry options
`Shift+m`
  Show mesh options
`Shift+o`
  Show general options
`Shift+p`
  Show post-processing options
`Shift+s`
  Show solver options
`Shift+u`
  Show post-processing view plugins
`Shift+w`
  Show post-processing view options
`Shift+Escape`
  Enable full mouse selection
`Ctrl+d`
  Attach/detach menu
`Ctrl+f`
  Enter full screen
`Ctrl+i`
  Show statistics window
`Ctrl+j`
  Save model options
`Ctrl+l`
  Show message console
`Ctrl+m`
  Minimize window
`Ctrl+n`
  Create new project file
`Ctrl+o`
  Open project file
`Ctrl+q`
  Quit
`Ctrl+r`
  Rename project file
`Ctrl+s`
  Save file as
`Shift+Ctrl+c`
  Show clipping plane window
`Shift+Ctrl+h`
  Show current options and workspace window
`Shift+Ctrl+j`
  Save options as default
`Shift+Ctrl+m`
  Show manipulator window
`Shift+Ctrl+n`
  Show option window
`Shift+Ctrl+o`
  Merge file(s)
`Shift+Ctrl+s`
  Save mesh in default format
`Shift+Ctrl+u`
  Show plugin window
`Shift+Ctrl+v`
  Show visibility window
`Alt+a`
  Loop through axes modes
`Alt+b`
  Hide/show bounding boxes
`Alt+c`
  Loop through predefined color schemes
`Alt+e`
  Hide/Show element outlines for visible post-pro views
`Alt+f`
  Change redraw mode (fast/full)
`Alt+h`
  Hide/show all post-processing views
`Alt+i`
  Hide/show all post-processing view scales
`Alt+l`
  Hide/show geometry lines
`Alt+m`
  Toggle visibility of all mesh entities
`Alt+n`
  Hide/show all post-processing view annotations
`Alt+o`
  Change projection mode (orthographic/perspective)
`Alt+p`
  Hide/show geometry points
`Alt+r`
  Loop through range modes for visible post-pro views
`Alt+s`
  Hide/show geometry surfaces
`Alt+t`
  Loop through interval modes for visible post-pro views
`Alt+v`
  Hide/show geometry volumes
`Alt+w`
  Enable/disable all lighting
`Alt+x`
  Set X view
`Alt+y`
  Set Y view
`Alt+z`
  Set Z view
`Alt+Shift+a`
  Hide/show small axes
`Alt+Shift+b`
  Hide/show mesh volume faces
`Alt+Shift+d`
  Hide/show mesh surface faces
`Alt+Shift+l`
  Hide/show mesh lines
`Alt+Shift+p`
  Hide/show mesh points
`Alt+Shift+s`
  Hide/show mesh surface edges
`Alt+Shift+t`
  Same as Alt+t, but with numeric mode included
`Alt+Shift+v`
  Hide/show mesh volume edges
`Alt+Shift+w`
  Reverse all mesh normals
`Alt+Shift+x`
  Set -X view
`Alt+Shift+y`
  Set -Y view
`Alt+Shift+z`
  Set -Z view

Next: Geometry module, Previous: Running Gmsh on your system, Up: Top

## 4 General tools

This chapter describes the general commands and options that can be used in Gmsh's script files. By “general”, we mean “not specifically related to one of the geometry, mesh, solver or post-processing modules”. Commands peculiar to these modules will be introduced in Geometry module, Mesh module, Solver module, and Post-processing module, respectively.

Next: Expressions, Previous: General tools, Up: General tools

### 4.1 Comments

Gmsh script files support both C and C++ style comments:

1. any text comprised between `/*` and `*/` pairs is ignored;
2. the rest of a line after a double slash `//` is ignored.

These commands won't have the described effects inside double quotes or inside keywords. Also note that `white space' (spaces, tabs, new line characters) is ignored inside all expressions.

Next: Operators, Previous: Comments, Up: General tools

### 4.2 Expressions

The two constant types used in Gmsh scripts are real and string (there is no integer type). These types have the same meaning and syntax as in the C or C++ programming languages.

Next: Character expressions, Previous: Expressions, Up: Expressions

#### 4.2.1 Floating point expressions

Floating point expressions (or, more simply, “expressions”) are denoted by the metasyntactic variable expression (remember the definition of the syntactic rules in Syntactic rules), and are evaluated during the parsing of the script file:

         expression:
           real |
           string |
           string ~ { expression }
           string [ expression ] |
           # string [ ] |
           ( expression ) |
           operator-unary-left expression |
           expression operator-unary-right |
           expression operator-binary expression |
           expression operator-ternary-left expression operator-ternary-right expression |
           built-in-function |
           real-option |
           Find(expression-list-item, expression-list-item) |
           StrFind(char-expression, char-expression) |
           StrCmp(char-expression, char-expression) |
           TextAttributes(char-expression<,char-expression...>) |
           Exists(string) | Exists(string~{ expression }) |
           FileExists(char-expression) |
           GetNumber(char-expression) |
           GetValue("string", expression) |
           DefineNumber(expression, onelab-options) |

Such expressions are used in most of Gmsh's scripting commands. When `~{`expression`}` is appended to a string string, the result is a new string formed by the concatenation of string, `_` (an underscore) and the value of the expression. This is most useful in loops (see Loops and conditionals), where it permits to define unique strings automatically. For example,

         For i In {1:3}
           x~{i} = i;
         EndFor

is the same as

         x_1 = 1;
         x_2 = 2;
         x_3 = 3;

The brackets `[]` permit to extract one item from a list. The `#` permits to get the size of a list. The operators operator-unary-left, operator-unary-right, operator-binary, operator-ternary-left and operator-ternary-right are defined in Operators. For the definition of built-in-functions, see Built-in functions. The various real-options are listed in Options. `Find` searches for occurrences of the first expression in the second (both of which can be lists). `StrFind` searches the first char-expression for any occurrence of the second char-expression. `StrCmp` compares the two strings (returns an integer greater than, equal to, or less than 0, according as the first string is greater than, equal to, or less than the second string). `TextAttributes` creates attributes for text strings. `Exists` checks if a variable with the given name exists (i.e., has been defined previously), and `FileExists` checks if the file with the given name exists. `GetNumber` allows to get the value of a ONELAB variable (the argument is the name of the variable). `GetValue` allows to ask the user for a value interactively. For example, inserting `GetValue("Value of parameter alpha?", 5.76)` in an input file will query the user for the value of a certain parameter alpha, assuming the default value is 5.76. If the option `General.NoPopup` is set (see General options list), no question is asked and the default value is automatically used.

`DefineNumber` allows to define a ONELAB variable in-line. The expression given as the first argument is the default value; this is followed by the various ONELAB options. See http://onelab.info/wiki/ONELAB_Syntax_for_Gmsh_and_GetDP for more information.

List of expressions are also widely used, and are defined as:

         expression-list:
           expression-list-item <, expression-list-item> ...

with

         expression-list-item:
           expression |
           expression : expression |
           expression : expression : expression |
           string [ ] |
           string ( ) |
           List [ string ] |
           string [ { expression-list } ] |
           string ( { expression-list } ) |
           Point { expression } |
           transform |
           extrude
           Point { expression } |
           <Physical> Point|Line|Surface|Volume "*" |
           Point|Line|Surface|Volume In BoundingBox { expression-list } |
           Physical Point|Line|Surface|Volume { expression-list }

The second case in this last definition permits to create a list containing the range of numbers comprised between two expressions, with a unit incrementation step. The third case also permits to create a list containing the range of numbers comprised between two expressions, but with a positive or negative incrementation step equal to the third expression. The fourth, fifth and sixth cases permit to reference an expression list. The seventh and eight cases permit to reference an expression sublist (whose elements are those corresponding to the indices provided by the expression-list). The next two cases permit to retrieve the indices of entities created through geometrical transformations and extrusions (see Transformations, and Extrusions). The last three cases permit to retrieve the coordinates of a given geometry point (see Points), to retrieve the id numbers of all points, lines, surfaces or volumes in the model, or to retrieve the elementary entities making up physical groups.

To see the practical use of such expressions, have a look at the first couple of examples in Tutorial. Note that, in order to lighten the syntax, you can omit the braces `{}` enclosing an expression-list if this expression-list only contains a single item. Also note that a braced expression-list can be preceded by a minus sign in order to change the sign of all the expression-list-items.

Next: Color expressions, Previous: Floating point expressions, Up: Expressions

#### 4.2.2 Character expressions

Character expressions are defined as:

         char-expression:
           "string" |
           Today | OnelabAction | GmshExecutableName |
           CurrentDirectory | CurrentDir
           StrPrefix ( char-expression ) |
           StrRelative ( char-expression ) |
           StrCat ( char-expression <,...> ) |
           Str ( char-expression <,...> ) |
           StrChoice ( expression, char-expression, char-expression) |
           Sprintf ( char-expression , expression-list ) |
           Sprintf ( char-expression ) |
           Sprintf ( char-option ) |
           GetEnv ( char-expression ) |
           GetString ( char-expression ) |
           GetString ( char-expression , char-expression ) |
           StrReplace ( char-expression , char-expression , char-expression )
           DefineString(char-expression, onelab-options)

`Today` returns the current date. `OnelabAction` returns the current ONELAB action (e.g. `check` or `compute`). `GmshExecutableName` returns the full path of the Gmsh executable. `CurrentDirectory` and `CurrentDir` return the directory of the `.geo` file. `StrPrefix` and `StrRelative` permit to take the prefix (e.g. to remove the extension) or the relative path of a file name. `StrCat` and `Str` permit to concatenate character expressions (`Str` adds a newline character after each string except the last). `Sprintf` is equivalent to the `sprintf` C function (where char-expression is a format string that can contain floating point formatting characters: `%e`, `%g`, etc.) The various char-options are listed in Options. `GetEnvThe` gets the value of an environment variable from the operating system. `GetString` allows to get a ONELAB string value (with one argument, the name of the ONELAB variable), or ask the user for a value interactively (with two arguments). `StrReplace`'s arguments are: input string, old substring, new substring.10

`DefineString` allows to define a ONELAB variable in-line. The char-expression given as the first argument is the default value; this is followed by the various ONELAB options. See http://onelab.info/wiki/ONELAB_Syntax_for_Gmsh_and_GetDP for more information.

Character expressions are mostly used to specify non-numeric options and input/output file names. See t8.geo, for an interesting usage of char-expressions in an animation script.

Previous: Character expressions, Up: Expressions

#### 4.2.3 Color expressions

Colors expressions are hybrids between fixed-length braced expression-lists and strings:

         color-expression:
           string |
           { expression, expression, expression } |
           { expression, expression, expression, expression } |
           color-option

The first case permits to use the X Windows names to refer to colors, e.g., `Red`, `SpringGreen`, `LavenderBlush3`, ... (see Common/Colors.h 11 in the source code for a complete list). The second case permits to define colors by using three expressions to specify their red, green and blue components (with values comprised between 0 and 255). The third case permits to define colors by using their red, green and blue color components as well as their alpha channel. The last case permits to use the value of a color-option as a color-expression. The various color-options are listed in Options.

See t3.geo, for an example of the use of color expressions.

Next: Built-in functions, Previous: Expressions, Up: General tools

### 4.3 Operators

Gmsh's operators are similar to the corresponding operators in C and C++. Here is the list of the unary, binary and ternary operators currently implemented.

operator-unary-left:

`-`
  Unary minus.
`!`
  Logical not.

operator-unary-right:

`++`
  Post-incrementation.
`--`
  Post-decrementation.

operator-binary:

`^`
  Exponentiation.
`*`
  Multiplication.
`/`
  Division.
`%`
  Modulo.
`+`
  Addition.
`-`
  Subtraction.
`==`
  Equality.
`!=`
  Inequality.
`>`
  Greater.
`>=`
  Greater or equality.
`<`
  Less.
`<=`
  Less or equality.
`&&`
  Logical `and'.
`||`
  Logical `or'. (Warning: the logical `or' always implies the evaluation of both arguments. That is, unlike in C or C++, the second operand of `||` is evaluated even if the first one is true).

operator-ternary-left:

`?`

operator-ternary-right:

`:`
  The only ternary operator, formed by operator-ternary-left and operator-ternary-right, returns the value of its second argument if the first argument is non-zero; otherwise it returns the value of its third argument.

The evaluation priorities are summarized below12 (from stronger to weaker, i.e., `*` has a highest evaluation priority than `+`). Parentheses `()` may be used anywhere to change the order of evaluation:

1. `()`, `[]`, `.`, `#`
2. `^`
3. `!`, `++`, `--`, `-` (unary)
4. `*`, `/`, `%`
5. `+`, `-`
6. `<`, `>`, `<=`, `>=`
7. `==`, `!=`
8. `&&`
9. `||`
10. `?:`
11. `=`, `+=`, `-=`, `*=`, `/=`

Next: User-defined macros, Previous: Operators, Up: General tools

### 4.4 Built-in functions

A built-in function is composed of an identifier followed by a pair of parentheses containing an expression-list (the list of its arguments)13. Here is the list of the built-in functions currently implemented:

build-in-function:

`Acos (` expression`)`
  Arc cosine (inverse cosine) of an expression in [-1,1]. Returns a value in [0,Pi].
`Asin (` expression`)`
  Arc sine (inverse sine) of an expression in [-1,1]. Returns a value in [-Pi/2,Pi/2].
`Atan (` expression`)`
  Arc tangent (inverse tangent) of expression. Returns a value in [-Pi/2,Pi/2].
`Atan2 (` expression`,` expression`)`
  Arc tangent (inverse tangent) of the first expression divided by the second. Returns a value in [-Pi,Pi].
`Ceil (` expression`)`
  Rounds expression up to the nearest integer.
`Cos (` expression`)`
  Cosine of expression.
`Cosh (` expression`)`
  Hyperbolic cosine of expression.
`Exp (` expression`)`
  Returns the value of e (the base of natural logarithms) raised to the power of expression.
`Fabs (` expression`)`
  Absolute value of expression.
`Fmod (` expression`,` expression`)`
  Remainder of the division of the first expression by the second, with the sign of the first.
`Floor (` expression`)`
  Rounds expression down to the nearest integer.
`Hypot (` expression`,` expression`)`
  Returns the square root of the sum of the square of its two arguments.
`Log (` expression`)`
  Natural logarithm of expression (expression > 0).
`Log10 (` expression`)`
  Base 10 logarithm of expression (expression > 0).
`Modulo (` expression`,` expression`)`
  see `Fmod(` expression`,` expression`)`.
`Rand (` expression`)`
  Random number between zero and expression.
`Round (` expression`)`
  Rounds expression to the nearest integer.
`Sqrt (` expression`)`
  Square root of expression (expression >= 0).
`Sin (` expression`)`
  Sine of expression.
`Sinh (` expression`)`
  Hyperbolic sine of expression.
`Tan (` expression`)`
  Tangent of expression.
`Tanh (` expression`)`
  Hyperbolic tangent of expression.

Next: Loops and conditionals, Previous: Built-in functions, Up: General tools

### 4.5 User-defined macros

User-defined macros take no arguments, and are evaluated as if a file containing the macro body was included at the location of the `Call` statement.

`Macro` string
  Begins the declaration of a user-defined macro named string. The body of the macro starts on the line after ``Macro` string', and can contain any Gmsh command. A synonym for `Macro` is `Function`.
`Return`
  Ends the body of the current user-defined macro. Macro declarations cannot be imbricated.
`Call` string`;`
  Executes the body of a (previously defined) macro named string.

See t5.geo, for an example of a user-defined macro. A shortcoming of Gmsh's scripting language is that all variables are “public”. Variables defined inside the body of a macro will thus be available outside, too!

Next: General commands, Previous: User-defined macros, Up: General tools

### 4.6 Loops and conditionals

Loops and conditionals are defined as follows, and can be imbricated:

`For (` expression`:` expression`)`
  Iterates from the value of the first expression to the value of the second expression, with a unit incrementation step. At each iteration, the commands comprised between ``For (` expression`:` expression`)`' and the matching `EndFor` are executed.
`For (` expression`:` expression`:` expression`)`
  Iterates from the value of the first expression to the value of the second expression, with a positive or negative incrementation step equal to the third expression. At each iteration, the commands comprised between ``For (` expression`:` expression`:` expression`)`' and the matching `EndFor` are executed.
`For` string `In {` expression`:` expression`}`
  Iterates from the value of the first expression to the value of the second expression, with a unit incrementation step. At each iteration, the value of the iterate is affected to an expression named string, and the commands comprised between ``For` string `In {` expression`:` expression`}`' and the matching `EndFor` are executed.
`For` string `In {` expression`:` expression`:` expression`}`
  Iterates from the value of the first expression to the value of the second expression, with a positive or negative incrementation step equal to the third expression. At each iteration, the value of the iterate is affected to an expression named string, and the commands comprised between ``For` string `In {` expression`:` expression`:` expression`}`' and the matching `EndFor` are executed.
`EndFor`
  Ends a matching `For` command.
`If (` expression`)`
  The body enclosed between ``If (` expression`)`' and the matching `Endif` is evaluated if expression is non-zero.
`EndIf`
  Ends a matching `If` command.

See t5.geo, for an example of `For` and `If` commands. Gmsh does not provide any `Else` (or similar) command at the time of this writing.

Next: General options, Previous: Loops and conditionals, Up: General tools

### 4.7 General commands

The following commands can be used anywhere in a Gmsh script:

string`=` expression`;`
  Creates a new expression identifier string, or affects expression to an existing expression identifier. Thirteen expression identifiers are predefined (hardcoded in Gmsh's parser):
  `Pi`
    Returns 3.1415926535897932.
  `GMSH_MAJOR_VERSION`
    Returns Gmsh's major version number.
  `GMSH_MINOR_VERSION`
    Returns Gmsh's minor version number.
  `GMSH_PATCH_VERSION`
    Returns Gmsh's patch version number.
  `MPI_Size`
    Returns the number of processors on which Gmsh is running. It is always 1, except if you compiled Gmsh with `ENABLE_MPI` (see Compiling the source code).
  `MPI_Rank`
    Returns the rank of the current processor.
  `Cpu`
    Returns the current CPU time (in seconds).
  `Memory`
    Returns the current memory usage (in Mb).
  `TotalMemory`
    Returns the total memory available (in Mb).
  `newp`
    Returns the next available point number. As explained in Geometry module, a unique number must be associated with every geometrical point: `newp` permits to know the highest number already attributed (plus one). This is mostly useful when writing user-defined macros (see User-defined macros) or general geometric primitives, when one does not know a priori which numbers are already attributed, and which ones are still available.
  `newl`
    Returns the next available line number.
  `news`
    Returns the next available surface number.
  `newv`
    Returns the next available volume number.
  `newll`
    Returns the next available line loop number.
  `newsl`
    Returns the next available surface loop number.
  `newreg`
    Returns the next available region number. That is, `newreg` returns the maximum of `newp`, `newl`, `news`, `newv`, `newll`, `newsl` and all physical entity numbers14.
string`= { };`
  Creates a new expression list identifier string with an empty list.
string`= {` expression-list`};`
  Creates a new expression list identifier string with the list expression-list, or affects expression-list to an existing expression list identifier. The following syntax is also allowed: string`[] = {` expression-list`};`
string`[ {` expression-list`} ] = {` expression-list`};`
  Affects each item in the right hand side expression-list to the elements (indexed by the left hand side expression-list) of an existing expression list identifier. The two expression-lists must contain the same number of items.
string`( {` expression-list`} ) = {` expression-list`};`
  Same as above.
string`+=` expression`;`
  Adds and affects expression to an existing expression identifier.
string`-=` expression`;`
  Subtracts and affects expression to an existing expression identifier.
string`*=` expression`;`
  Multiplies and affects expression to an existing expression identifier.
string`/=` expression`;`
  Divides and affects expression to an existing expression identifier.
string`+= {` expression-list`};`
  Appends expression-list to an existing expression list or creates a new expression list with expression-list.
string`-= {` expression-list`};`
  Removes the items in expression-list from the existing expression list.
string`[ {` expression-list`} ] += {` expression-list`};`
  Adds and affects, item per item, the right hand side expression-list to an existing expression list identifier.
string`[ {` expression-list`} ] -= {` expression-list`};`
  Subtracts and affects, item per item, the right hand side expression-list to an existing expression list identifier.
string`[ {` expression-list`} ] *= {` expression-list`};`
  Multiplies and affects, item per item, the right hand side expression-list to an existing expression list identifier.
string`[ {` expression-list`} ] /= {` expression-list`};`
  Divides and affects, item per item, the right hand side expression-list to an existing expression list identifier.
string`=` char-expression`;`
  Creates a new character expression identifier string with a given char-expression.
`DefineConstant[` string`=` expression`|`char-expression`<, ...>];`
  Creates a new expression identifier string, with value expression, only if has not been defined before.
`DefineConstant[` string`= {` expression`|`char-expression`,` onelab-options`} <, ...>];`
  Same as the previous case, except that the variable is also exchanged with the ONELAB database if it has not been defined before. See http://onelab.info/wiki/ONELAB_Syntax_for_Gmsh_and_GetDP for more information.
`SetNumber(` char-expression`,` expression`);`
  Sets the value a numeric ONELAB variable char-expression.
`SetString(` char-expression`,` char-expression`);`
  Sets the value a string ONELAB variable char-expression.
real-option`=` expression`;`
  Affects expression to a real option.
char-option`=` char-expression`;`
  Affects char-expression to a character option.
color-option`=` color-expression`;`
  Affects color-expression to a color option.
real-option`+=` expression`;`
  Adds and affects expression to a real option.
real-option`-=` expression`;`
  Subtracts and affects expression to a real option.
real-option`*=` expression`;`
  Multiplies and affects expression to a real option.
real-option`/=` expression`;`
  Divides and affects expression to a real option.
`Abort;`
  Aborts the current script.
`Exit;`
  Exits Gmsh.
`Printf (` char-expression`<,` expression-list`> );`
  Prints a character expression in the information window and/or on the terminal. `Printf` is equivalent to the `printf` C function: char-expression is a format string that can contain formatting characters (`%f`, `%e`, etc.). Note that all expressions are evaluated as floating point values in Gmsh (see Expressions), so that only valid floating point formatting characters make sense in char-expression. See t5.geo, for an example of the use of `Printf`.
`Printf (` char-expression`,` expression-list`) >` char-expression`;`
  Same as `Printf` above, but output the expression in a file.
`Printf (` char-expression`,` expression-list`) >>` char-expression`;`
  Same as `Printf` above, but appends the expression at the end of the file.
`Error (` char-expression`<,` expression-list`> );`
  Same as `Printf`, but raises an error.
`Merge` char-expression`;`
  Merges a file named char-expression. This command is equivalent to the `File->Merge' menu in the GUI. If the path in char-expression is not absolute, char-expression is appended to the path of the current file.
`Draw;`
  Redraws the scene.
`SetChanged;`
  Force the mesh and post-processing vertex arrays to be regenerated. Useful e.g. for creating animations with changing clipping planes, etc.
`BoundingBox;`
  Recomputes the bounding box of the scene (which is normally computed only after new geometrical entities are added or after files are included or merged). The bounding box is computed as follows:
  1. If there is a mesh (i.e., at least one mesh vertex), the bounding box is taken as the box enclosing all the mesh vertices;
  2. If there is no mesh but there is a geometry (i.e., at least one geometrical point), the bounding box is taken as the box enclosing all the geometrical points;
  3. If there is no mesh and no geometry, but there are some post-processing views, the bounding box is taken as the box enclosing all the primitives in the views.
`BoundingBox {` expression`,` expression`,` expression`,` expression`,` expression`,` expression`};`
  Forces the bounding box of the scene to the given expressions (X min, X max, Y min, Y max, Z min, Z max).
`Delete Model;`
  Deletes the current model (all geometrical entities and their associated meshes).
`Delete Physicals;`
  Deletes all physical groups.
`Delete Variables;`
  Deletes all the expressions.
`Delete Options;`
  Deletes the current options and revert to the default values.
`Delete` string`;`
  Deletes the expression string.
`Mesh` expression`;`
  Generates expression-D mesh.
`RefineMesh;`
  Refines the current mesh by splitting all elements. If `Mesh.SecondOrderLinear` is set, the new vertices are inserted by linear interpolatinon. Otherwise they are snapped on the actual geometry.
`AdaptMesh {` expression-list`} {` expression-list`} { {` expression-list`< , ... > } };`
  Performs adaptive mesh generation. Documentation not yet available.
`RelocateMesh Point | Line | Surface {` expression-list`} | "*";`
  Relocates the mesh vertices on the given entities using the parametric coordinates stored in the vertices. Useful for creating perturbation of meshes e.g. for sensitivity analyzes.
`SetOrder` expression`;`
  Changes the order of the elements in the current mesh.
`Print` char-expression`;`
  Prints the graphic window in a file named char-expression, using the current `Print.Format` (see General options list). If the path in char-expression is not absolute, char-expression is appended to the path of the current file.
`Sleep` expression`;`
  Suspends the execution of Gmsh during expression seconds.
`SystemCall` char-expression`;`
  Executes a (blocking) system call.
`NonBlockingSystemCall` char-expression`;`
  Executes a (non-blocking) system call.
`SetName` char-expression`;`
  Changes the name of the current model.
`SyncModel;`
  Forces an immediate transfer from the old geometrical database into the new one (this transfer normally occurs right after a file is read).
`NewModel;`
  Creates a new current model.
`Include` char-expression`;`
  Includes the file named char-expression at the current position in the input file. The include command should be given on a line of its own. If the path in char-expression is not absolute, char-expression is appended to the path of the current file.

Previous: General commands, Up: General tools

### 4.8 General options

The list of all the general char-options, real-options and color-options (in that order—check the default values to see the actual types) is given in General options list. Most of these options are accessible in the GUI, but not all of them. When running Gmsh interactively, changing an option in the script file will modify the option in the GUI in real time. This permits for example to resize the graphical window in a script, or to interact with animations in the script and in the GUI at the same time.

Next: Mesh module, Previous: General tools, Up: Top

## 5 Geometry module

Gmsh's geometry module provides a simple CAD engine, using a boundary representation (“BRep”) approach: you need to first define points (using the `Point` command: see below), then lines (using `Line`, `Circle`, `Spline`, ..., commands or by extruding points), then surfaces (using for example the `Plane Surface` or `Ruled Surface` commands, or by extruding lines), and finally volumes (using the `Volume` command or by extruding surfaces).

These geometrical entities are called “elementary” in Gmsh's jargon, and are assigned identification numbers (stricly positive) when they are created:

1. each elementary point must possess a unique identification number;
2. each elementary line must possess a unique identification number;
3. each elementary surface must possess a unique identification number;
4. each elementary volume must possess a unique identification number.

Elementary geometrical entities can then be manipulated in various ways, for example using the `Translate`, `Rotate`, `Scale` or `Symmetry` commands. They can be deleted with the `Delete` command, provided that no higher-dimension entity references them. Zero or negative identification numbers are reserved by the system for special uses: do not use them in your scripts.

Groups of elementary geometrical entities can also be defined and are called “physical” entities. These physical entities cannot be modified by geometry commands: their only purpose is to assemble elementary entities into larger groups, possibly modifying their orientation, so that they can be referred to by the mesh module as single entities. As is the case with elementary entities, each physical point, physical line, physical surface or physical volume must be assigned a unique identification number. See Mesh module, for more information about how physical entities affect the way meshes are saved.

Next: Geometry options, Previous: Geometry module, Up: Geometry module

### 5.1 Geometry commands

The next subsections describe all the available geometry commands. These commands can be used anywhere in a Gmsh script file. Note that the following general syntax rule is followed for the definition of geometrical entities: “If an expression defines a new entity, it is enclosed between parentheses. If an expression refers to a previously defined entity, it is enclosed between braces.”

Next: Lines, Previous: Geometry commands, Up: Geometry commands

#### 5.1.1 Points

`Point (` expression`) = {` expression`,` expression`,` expression`<,` expression`> };`
  Creates an elementary point. The expression inside the parentheses is the point's identification number; the three first expressions inside the braces on the right hand side give the three X, Y and Z coordinates of the point in the three-dimensional Euclidean space; the optional last expression sets the prescribed mesh element size at that point. See Specifying mesh element sizes, for more information about how this value is used in the meshing process.
`Physical Point (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`
  Creates a physical point. The expression inside the parentheses is the physical point's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary points that need to be grouped inside the physical point. If a char-expression is given instead instead of expression inside the parentheses, a string label is associated with the physical identification number, which can be either provided explicitly (after the comma) or not (in which case a unique identification number is automatically created).

Next: Surfaces, Previous: Points, Up: Geometry commands

#### 5.1.2 Lines

`BSpline (` expression`) = {` expression-list`};`
  Creates a B-spline curve. The expression inside the parentheses is the B-spline curve's identification number; the expression-list on the right hand side should contain the identification numbers of all the B-spline's control points. Repeating control points has the expected effect.
`Circle (` expression`) = {` expression`,` expression`,` expression`};`
  Creates a circle arc (strictly) smaller than Pi. The expression inside the parentheses is the circle arc's identification number; the first expression inside the braces on the right hand side gives the identification number of the start point of the arc; the second expression gives the identification number of the center of the circle; the last expression gives the identification number of the end point of the arc.
`CatmullRom (` expression`) = {` expression-list`};`
  `CatmullRom` is a synonym for `Spline`.
`Ellipse (` expression`) = {` expression`,` expression`,` expression`,` expression`};`
  Creates an ellipse arc. The expression inside the parentheses is the ellipse arc's identification number; the first expression inside the braces on the right hand side gives the identification number of the start point of the arc; the second expression gives the identification number of the center of the ellipse; the third expression gives the identification number of any point located on the major axis of the ellipse; the last expression gives the identification number of the end point of the arc.
`Line (` expression`) = {` expression`,` expression`};`
  Creates a straight line segment. The expression inside the parentheses is the line segment's identification number; the two expressions inside the braces on the right hand side give identification numbers of the start and end points of the segment.
`Spline (` expression`) = {` expression-list`};`
  Creates a spline curve. The expression inside the parentheses is the spline's identification number; the expression-list on the right hand side should contain the identification numbers of all the spline's control points.
`Line Loop (` expression`) = {` expression-list`};`
  Creates an oriented line loop. The expression inside the parentheses is the line loop's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary lines that constitute the line loop. A line loop must be a closed loop, and the elementary lines should be ordered and oriented (using negative identification numbers to specify reverse orientation). If the orientation is correct, but the ordering is wrong, Gmsh will actually reorder the list internally to create a consistent loop. Although Gmsh supports it, it is not recommended to specify multiple line loops (or subloops) in a single `Line Loop` command. (Line loops are used to create surfaces: see Surfaces.)
`Compound Line (` expression`) = {` expression-list`};`
  Creates a compound line from several elementary lines. When meshed, a compound line will be reparametrized as a single line, whose mesh can thus cross internal boundaries. The expression inside the parentheses is the compound line's identification number; the expression-list on the right hand side contains the identification number of the elementary lines that should be reparametrized as a single line. See `Compound Surface` for additional information on compound entities.
`Physical Line (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`
  Creates a physical line. The expression inside the parentheses is the physical line's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary lines that need to be grouped inside the physical line. If a char-expression is given instead instead of expression inside the parentheses, a string label is associated with the physical identification number, which can be either provided explicitly (after the comma) or not (in which case a unique identification number is automatically created). Specifying negative identification numbers in the expression-list will reverse the orientation of the mesh elements belonging to the corresponding elementary lines in the saved mesh.

Next: Volumes, Previous: Lines, Up: Geometry commands

#### 5.1.3 Surfaces

`Plane Surface (` expression`) = {` expression-list`};`
  Creates a plane surface. The expression inside the parentheses is the plane surface's identification number; the expression-list on the right hand side should contain the identification numbers of all the line loops defining the surface. The first line loop defines the exterior boundary of the surface; all other line loops define holes in the surface. A line loop defining a hole should not have any lines in common with the exterior line loop (in which case it is not a hole, and the two surfaces should be defined separately). Likewise, a line loop defining a hole should not have any lines in common with another line loop defining a hole in the same surface (in which case the two line loops should be combined).
`Ruled Surface (` expression`) = {` expression-list`} < In Sphere {` expression`} >;`
  Creates a ruled surface, i.e., a surface that can be interpolated using transfinite interpolation. The expression inside the parentheses is the ruled surface's identification number; the first expression-list on the right hand side should contain the identification number of a line loop composed of either three or four elementary lines. The optional `In Sphere` argument forces the surface to be a spherical patch (the extra parameter gives the identification number of the center of the sphere).
`Surface Loop (` expression`) = {` expression-list`};`
  Creates a surface loop (a shell). The expression inside the parentheses is the surface loop's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary surfaces that constitute the surface loop. A surface loop must always represent a closed shell, and the elementary surfaces should be oriented consistently (using negative identification numbers to specify reverse orientation). (Surface loops are used to create volumes: see Volumes.)
`Compound Surface (` expression`) = {` expression-list`} < Boundary { {` expression-list`}, {` expression-list`}, {` expression-list`}, {` expression-list`} } > ;`
  Creates a compound surface from several elementary surfaces. When meshed, a compound surface will be reparametrized as a single surface, whose mesh can thus cross internal boundaries. Compound surfaces are mostly useful for remeshing discrete models; see “J.-F. Remacle, C. Geuzaine, G. Compere and E. Marchandise, High Quality Surface Remeshing Using Harmonic Maps, International Journal for Numerical Methods in Engineering, 2009” for details as well as the wiki for more examples. The expression inside the parentheses is the compound surface's identification number; the mandatory expression-list on the right hand side contains the identification number of the elementary surfaces that should be reparametrized as a single surface.
`Physical Surface (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`
  Creates a physical surface. The expression inside the parentheses is the physical surface's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary surfaces that need to be grouped inside the physical surface. If a char-expression is given instead instead of expression inside the parentheses, a string label is associated with the physical identification number, which can be either provided explicitly (after the comma) or not (in which case a unique identification number is automatically created). Specifying negative identification numbers in the expression-list will reverse the orientation of the mesh elements belonging to the corresponding elementary surfaces in the saved mesh.

Next: Extrusions, Previous: Surfaces, Up: Geometry commands

#### 5.1.4 Volumes

`Volume (` expression`) = {` expression-list`};`
  Creates a volume. The expression inside the parentheses is the volume's identification number; the expression-list on the right hand side should contain the identification numbers of all the surface loops defining the volume. The first surface loop defines the exterior boundary of the volume; all other surface loops define holes in the volume. A surface loop defining a hole should not have any surfaces in common with the exterior surface loop (in which case it is not a hole, and the two volumes should be defined separately). Likewise, a surface loop defining a hole should not have any surfaces in common with another surface loop defining a hole in the same volume (in which case the two surface loops should be combined).
`Compound Volume (` expression`) = {` expression-list`};`
  Creates a compound volume from several elementary volumes. When meshed, a compound volume will be reparametrized as a single volume, whose mesh can thus cross internal boundaries. The expression inside the parentheses is the compound volume's identification number; the expression-list on the right hand side contains the identification number of the elementary volumes that should be reparametrized as a single volume. See `Compound Surface` for additional information on compound entities.
`Physical Volume (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`
  Creates a physical volume. The expression inside the parentheses is the physical volume's identification number; the expression-list on the right hand side should contain the identification numbers of all the elementary volumes that need to be grouped inside the physical volume. If a char-expression is given instead instead of expression inside the parentheses, a string label is associated with the physical identification number, which can be either provided explicitly (after the comma) or not (in which case a unique identification number is automatically created).

Next: Transformations, Previous: Volumes, Up: Geometry commands

#### 5.1.5 Extrusions

Lines, surfaces and volumes can also be created through extrusion of points, lines and surfaces, respectively. Here is the syntax of the geometrical extrusion commands (go to Structured grids, to see how these commands can be extended in order to also extrude the mesh):

extrude:

`Extrude {` expression-list`} {` extrude-list`}`
  Extrudes all elementary entities (points, lines or surfaces) in extrude-list using a translation. The expression-list should contain three expressions giving the X, Y and Z components of the translation vector.
`Extrude { {` expression-list`}, {` expression-list`},` expression`} {` extrude-list`}`
  Extrudes all elementary entities (points, lines or surfaces) in extrude-list using a rotation. The first expression-list should contain three expressions giving the X, Y and Z direction of the rotation axis; the second expression-list should contain three expressions giving the X, Y and Z components of any point on this axis; the last expression should contain the rotation angle (in radians).
`Extrude { {` expression-list`}, {` expression-list`}, {` expression-list`},` expression`} {` extrude-list`}`
  Extrudes all elementary entities (points, lines or surfaces) in extrude-list using a translation combined with a rotation. The first expression-list should contain three expressions giving the X, Y and Z components of the translation vector; the second expression-list should contain three expressions giving the X, Y and Z direction of the rotation axis; the third expression-list should contain three expressions giving the X, Y and Z components of any point on this axis; the last expression should contain the rotation angle (in radians).

with

         extrude-list:
           Point | Line | Surface { expression-list }; ...

As explained in Floating point expressions, extrude can be used in an expression, in which case it returns a list of identification numbers. By default, the list contains the “top” of the extruded entity at index 0 and the extruded entity at index 1, followed by the “sides” of the extruded entity at indices 2, 3, etc. For example:

           Point(1) = {0,0,0};
           Point(2) = {1,0,0};
           Line(1) = {1, 2};
           out[] = Extrude{0,1,0}{ Line{1}; };
           Printf("top line = %g", out[0]);
           Printf("surface = %g", out[1]);
           Printf("side lines = %g and %g", out[2], out[3]);

This behaviour can be changed with the `Geometry.ExtrudeReturnLateralEntities` option (see Geometry options list).

Next: Miscellaneous geometry commands, Previous: Extrusions, Up: Geometry commands

#### 5.1.6 Transformations

Geometrical transformations can be applied to elementary entities, or to copies of elementary entities (using the `Duplicata` command: see below). The syntax of the transformation commands is:

transform:

`Dilate { {` expression-list`},` expression`} {` transform-list`}`
  Scales all elementary entities in transform-list by a factor expression. The expression-list should contain three expressions giving the X, Y and Z direction of the homothetic transformation.
`Rotate { {` expression-list`}, {` expression-list`},` expression`} {` transform-list`}`
  Rotates all elementary entities in transform-list by an angle of expression radians. The first expression-list should contain three expressions giving the X, Y and Z direction of the rotation axis; the second expression-list should contain three expressions giving the X, Y and Z components of any point on this axis.
`Symmetry {` expression-list`} {` transform-list`}`
  Transforms all elementary entities symmetrically to a plane. The expression-list should contain four expressions giving the coefficients of the plane's equation.
`Translate {` expression-list`} {` transform-list`}`
  Translates all elementary entities in transform-list. The expression-list should contain three expressions giving the X, Y and Z components of the translation vector.
`Boundary {` transform-list`}`
  (Not a transformation per-se.) Returns the boundary of the elementary entities in transform-list.
`CombinedBoundary {` transform-list`}`
  (Not a transformation per-se.) Returns the boundary of the elementary entities, combined as if a single entity, in transform-list. Useful to compute the boundary of a complex part.

with

         transform-list:
           Point | Line | Surface | Volume { expression-list }; ... |
           Duplicata { Point | Line | Surface | Volume { expression-list }; ... } |
           transform

Previous: Transformations, Up: Geometry commands

#### 5.1.7 Miscellaneous

Here is a list of all other geometry commands currently available:

`Coherence;`
  Removes all duplicate elementary geometrical entities (e.g., points having identical coordinates). Note that Gmsh executes the `Coherence` command automatically after each geometrical transformation, unless `Geometry.AutoCoherence` is set to zero (see Geometry options list).
`Delete { Point | Line | Surface | Volume {` expression-list`}; ... }`
  Deletes all elementary entities whose identification numbers are given in expression-list. If an entity is linked to another entity (for example, if a point is used as a control point of a curve), `Delete` has no effect (the line will have to be deleted before the point can).
`< Recursive > Hide { Point | Line | Surface | Volume {` expression-list`}; ... }`
  Hide the entities listed in expression-list, if `General.VisibilityMode` is set to `0` or `1`.
`Hide` char-expression`;`
  Hide the entity char-expression, if `General.VisibilityMode` is set to `0` or `1` (char-expression can for example be `"*"`).
`< Recursive > Show { Point | Line | Surface | Volume {` expression-list`}; ... }`
  Show the entities listed in expression-list, if `General.VisibilityMode` is set to `0` or `1`.
`Show` char-expression`;`
  Show the entity char-expression, if `General.VisibilityMode` is set to `0` or `1` (char-expression can for example be `"*"`).

Previous: Geometry commands, Up: Geometry module

### 5.2 Geometry options

The list of all the options that control the behavior of geometry commands, as well as the way geometrical entities are handled in the GUI, is give in Geometry options list.

Next: Solver module, Previous: Geometry module, Up: Top

## 6 Mesh module

Gmsh's mesh module regroups several 1D, 2D and 3D meshing algorithms, all producing grids conforming in the sense of finite elements (see Mesh):

- The 2D unstructured algorithms generate triangles or both triangles and quadrangles (when `Recombine Surface` is used: see Miscellaneous mesh commands). The 3D unstructured algorithms generate tetrahedra.
- The 2D structured algorithms (transfinite and extrusion) generate triangles by default, but quadrangles can be obtained by using the `Recombine` commands (see Structured grids, and Miscellaneous mesh commands). The 3D structured algorithms generate tetrahedra, hexahedra, prisms and pyramids, depending on the type of the surface meshes they are based on.

All meshes can be subdivided to generate fully quadrangular or fully hexahedral meshes with the `Mesh.SubdivisionAlgorihm` option (see Mesh options list). However, beware that the quality of subdivided elements initially generated with an unstructured algorithm can be quite poor.

Next: Elementary vs physical entities, Previous: Mesh module, Up: Mesh module

### 6.1 Choosing the right unstructured algorithm

Gmsh currently provides a choice between three 2D unstructured algorithms and between two 3D unstructured algorithms. Each algorithm has its own advantages and disadvantages.

For all 2D unstructured algorithms a Delaunay mesh that contains all the points of the 1D mesh is initially constructed using a divide-and-conquer algorithm15. Missing edges are recovered using edge swaps16. After this initial step three different algorithms can be applied to generate the final mesh:

1. The “MeshAdapt” algorithm17 is based on local mesh modifications. This technique makes use of edge swaps, splits, and collapses: long edges are split, short edges are collapsed, and edges are swapped if a better geometrical configuration is obtained.
2. The “Delaunay” algorithm is inspired by the work of the GAMMA team at INRIA18. New points are inserted sequentially at the circumcenter of the element that has the largest adimensional circumradius. The mesh is then reconnected using an anisotropic Delaunay criterion.
3. The “Frontal” algorithm is inspired by the work of S. Rebay19.

These algorithms can be ranked as follows:

                       Robustness        Performance      Element quality
         MeshAdapt         1                  3                 2
         Delaunay          2                  1                 2
         Frontal           3                  2                 1

For very complex curved surfaces the “MeshAdapt” algorithm is the best choice. When high element quality is important, the “Frontal” algorithm should be tried. For very large meshes of plane surfaces the “Delaunay” algorithm is the fastest.

The “Automatic” algorithm tries to select the best algorithm automatically for each surface in the model. As of Gmsh 2.8, the “Automatic” algorithm selects “Delaunay” for plane surfaces and “MeshAdapt” for all other surfaces.

In 3D two unstructured algorithms are available:

1. The “Delaunay” algorithm is split into two separate steps. First, an initial mesh of the union of all the volumes in the model is performed using H. Si's Tetgen algorithm20. Then a three-dimensional version of the 2D Delaunay algorithm described above is applied.
2. The “Frontal” algorithm uses J. Schoeberl's Netgen algorithm 21.

The “Delaunay” algorithm is the most robust and the fastest, and is the only one that supports the `Field` mechanism to specify element sizes (see Specifying mesh element sizes). However, this algorithm will sometimes modify the surface mesh, and is thus not suitable for producing hybrid structured/unstructured grids. In that case the “Frontal” algorithm should be preferred. The quality of the elements produced by both algorithms is comparable. If element quality is important the mesh optimizer(s) should be applied.

Next: Mesh commands, Previous: Choosing the right unstructured algorithm, Up: Mesh module

### 6.2 Elementary vs. physical entities

If only elementary geometrical entities are defined (or if the `Mesh.SaveAll` option is set; see Mesh options list), the grid produced by the mesh module will be saved “as is”. That is, all the elements in the grid will be saved using the identification number of the elementary entities they discretize as their elementary region number (and 0 as their physical region number22; File formats). This can sometimes be inconvenient:

- mesh elements cannot be duplicated;
- the orientation of the mesh elements (the ordering of their nodes) is determined entirely by the orientation of their “parent” elementary entities, and cannot be modified;
- elements belonging to different elementary entities cannot be linked as being part of a larger group having a physical or mathematical meaning (like `Left wing', `Metallic part', `Dirichlet boundary condition', ...).

To remedy these problems, the geometry module (see Geometry module) introduces the notion of “physical” entities (also called “physical groups”). The purpose of physical entities is to assemble elementary entities into larger, possibly overlapping groups, and to control the orientation of the elements in these groups. The introduction of physical entities in large models usually greatly facilitates the manipulation of the model (e.g., using `Tools->Visibility' in the GUI) and the interfacing with external solvers.

In the MSH file format (see File formats), if physical entities are defined, the output mesh only contains those elements that belong to physical entities. Other file formats each treat physical entities in slightly different ways, depending on their capability to define groups.

In all cases, Gmsh reindexes the mesh vertices and elements so that they are numbered in a continuous sequence in the output files. Note that the numbers displayed on screen after mesh generation thus usually differ from the ones saved in the mesh files. To check the actual numbers saved in the output file just load the file back using `File->Open'.

Next: Mesh options, Previous: Elementary vs physical entities, Up: Mesh module

### 6.3 Mesh commands

The mesh module commands mostly permit to modify the mesh element sizes and specify structured grid parameters. The actual mesh “actions” (i.e., “mesh the lines”, “mesh the surfaces” and “mesh the volumes”) cannot be specified in the script files. They have to be given either in the GUI or on the command line (see Running Gmsh on your system, and Command-line options).

Next: Structured grids, Previous: Mesh commands, Up: Mesh commands

#### 6.3.1 Specifying mesh element sizes

There are three ways to specify the size of the mesh elements for a given geometry:

1. First, if `Mesh.CharacteristicLengthFromPoints` is set (it is by default), you can simply specify desired mesh element sizes at the geometrical points of the model (with the `Point` command: see Points). The size of the mesh elements will then be computed by linearly interpolating these values on the initial mesh (see Mesh). This might sometimes lead to over-refinement in some areas, so that you may have to add “dummy” geometrical entities in the model in order to get the desired element sizes.

   This method works with all the algorithms implemented in the mesh module. The final element sizes are of course constrained by the structured algorithms for which the element sizes are explicitly specified (e.g., transfinite and extruded grids: see Structured grids).

2. Second, if `Mesh.CharacteristicLengthFromCurvature` is set (it is not by default), the mesh will be adapted with respect to the curvature of the geometrical entities.
3. Finally, you can specify general mesh size “fields”. Various fields exist:
   - A `PostView` field specifies an explicit background mesh in the form of a scalar post-processing view (see Post-processing commands, and File formats) in which the nodal values are the target element sizes. This method is very general but it requires a first (usually rough) mesh and a way to compute the target sizes on this mesh (usually through an error estimation procedure, in an iterative process of mesh adaptation). Warning: only parsed (`.pos`) files can currently be used as background meshes (`.msh` files cannot be used, since the mesh used to define the field will be destroyed during the meshing process).

     (Note that you can also load a background mesh directly from the command line using the `-bgm` option (see Command-line options), or in the GUI by selecting `Apply as background mesh' in the post-processing view option menu.)

   - A `Box` field specifies the size of the elements inside and outside of a parallelepipedic region.
   - A `Threshold` field specifies the size of the mesh according to the distance to some geometrical entities. These entities can for example be geometry points and lines specified by an `Attractor` field.
   - A `MathEval` field specifies the size of the mesh using an explicit mathematical function.
   - A `Min` field specifies the size as the minimum of the sizes computed using other fields
   - ...

   Fields are supported by all the algorithms except those based on Netgen. The list of available fields with their options is given below.

The three aforementioned methods can be used simultaneously, in which case the smallest element size is selected at any given point.

All element sizes are further constrained by the `Mesh.CharacteristicLengthMin`, `Mesh.CharacteristicLengthMax` and `Mesh.CharacteristicLengthFactor` options (see Mesh options list)

Here are the mesh commands that are related to the specification of mesh element sizes:

`Characteristic Length {` expression-list`} =` expression`;`
  Modify the prescribed mesh element size of the points whose identification numbers are listed in expression-list. The new value is given by expression.
`Field[`expression`] =` string`;`
  Create a new field (with id number expression), of type string.
`Field[`expression`].`string`=` char-expression`|` expression`|` expression-list`;`
  Set the option string of the expression-th field.
`Background Field =` expression`;`
  Select the expression-th field as the one used to compute element sizes. Only one background field can be given; if you want to combine several field, use the `Min` or `Max` field (see below).

Here is the list of all available fields with their associated options:

`Attractor`
  Compute the distance from the nearest node in a list. It can also be used to compute the distance from curves, in which case each curve is replaced by NNodesByEdge equidistant nodes and the distance from those nodes is computed.
  Options:
  `EdgesList`
    Indices of curves in the geometric model
    type: list
    default value: `{}`
  `FacesList`
    Indices of surfaces in the geometric model (Warning, this feature is still experimental. It might (read: will probably) give wrong results for complex surfaces)
    type: list
    default value: `{}`
  `FieldX`
    Id of the field to use as x coordinate.
    type: integer
    default value: `-1`
  `FieldY`
    Id of the field to use as y coordinate.
    type: integer
    default value: `-1`
  `FieldZ`
    Id of the field to use as z coordinate.
    type: integer
    default value: `-1`
  `NNodesByEdge`
    Number of nodes used to discretized each curve
    type: integer
    default value: `20`
  `NodesList`
    Indices of nodes in the geometric model
    type: list
    default value: `{}`
`AttractorAnisoCurve`
  Compute the distance from the nearest curve in a list. Then the mesh size can be specified independently in the direction normal to the curve and in the direction parallel to the curve (Each curve is replaced by NNodesByEdge equidistant nodes and the distance from those nodes is computed.)
  Options:
  `EdgesList`
    Indices of curves in the geometric model
    type: list
    default value: `{}`
  `NNodesByEdge`
    Number of nodes used to discretized each curve
    type: integer
    default value: `20`
  `dMax`
    Maxmium distance, above this distance from the curves, prescribe the maximum mesh sizes.
    type: float
    default value: `0.5`
  `dMin`
    Minimum distance, bellow this distance from the curves, prescribe the minimum mesh sizes.
    type: float
    default value: `0.1`
  `lMaxNormal`
    Maximum mesh size in the direction normal to the closest curve.
    type: float
    default value: `0.5`
  `lMaxTangent`
    Maximum mesh size in the direction tangeant to the closest curve.
    type: float
    default value: `0.5`
  `lMinNormal`
    Minimum mesh size in the direction normal to the closest curve.
    type: float
    default value: `0.05`
  `lMinTangent`
    Minimum mesh size in the direction tangeant to the closest curve.
    type: float
    default value: `0.5`
`Ball`
  The value of this field is VIn inside a spherical ball, VOut outside. The ball is defined by
  ||dX||^2 < R^2 &&
  dX = (X - XC)^2 + (Y-YC)^2 + (Z-ZC)^2
  Options:
  `Radius`
    Radius
    type: float
    default value: `0`
  `VIn`
    Value inside the ball
    type: float
    default value: `0`
  `VOut`
    Value outside the ball
    type: float
    default value: `0`
  `XCenter`
    X coordinate of the ball center
    type: float
    default value: `0`
  `YCenter`
    Y coordinate of the ball center
    type: float
    default value: `0`
  `ZCenter`
    Z coordinate of the ball center
    type: float
    default value: `0`
`BoundaryLayer`
  hwall * ratio^(dist/hwall)
  Options:
  `AnisoMax`
    Threshold angle for creating a mesh fan in the boundary layer
    type: float
    default value: `10000000000`
  `EdgesList`
    Indices of curves in the geometric model for which a boundary layer is needed
    type: list
    default value: `{}`
  `FacesList`
    Indices of faces in the geometric model for which a boundary layer is needed
    type: list
    default value: `{}`
  `FanNodesList`
    Indices of vertices in the geometric model for which a fan is created
    type: list
    default value: `{}`
  `FansList`
    Indices of edges in the geometric model for which a fan is created
    type: list
    default value: `{}`
  `IntersectMetrics`
    Intersect metrics of all faces
    type: integer
    default value: `0`
  `NodesList`
    Indices of nodes in the geometric model
    type: list
    default value: `{}`
  `Quads`
    Generate recombined elements in the boundary layer
    type: integer
    default value: `0`
  `hfar`
    Element size far from the wall
    type: float
    default value: `1`
  `hwall_n`
    Mesh Size Normal to the The Wall
    type: float
    default value: `0.1`
  `hwall_t`
    Mesh Size Tangent to the Wall
    type: float
    default value: `0.5`
  `ratio`
    Size Ratio Between Two Successive Layers
    type: float
    default value: `1.1`
  `thickness`
    Maximal thickness of the boundary layer
    type: float
    default value: `0.01`
`Box`
  The value of this field is VIn inside the box, VOut outside the box. The box is given by
  Xmin <= x <= XMax &&
  YMin <= y <= YMax &&
  ZMin <= z <= ZMax
  Options:
  `VIn`
    Value inside the box
    type: float
    default value: `0`
  `VOut`
    Value outside the box
    type: float
    default value: `0`
  `XMax`
    Maximum X coordinate of the box
    type: float
    default value: `0`
  `XMin`
    Minimum X coordinate of the box
    type: float
    default value: `0`
  `YMax`
    Maximum Y coordinate of the box
    type: float
    default value: `0`
  `YMin`
    Minimum Y coordinate of the box
    type: float
    default value: `0`
  `ZMax`
    Maximum Z coordinate of the box
    type: float
    default value: `0`
  `ZMin`
    Minimum Z coordinate of the box
    type: float
    default value: `0`
`Centerline`
  The value of this field is the distance to the centerline.
  You should specify a fileName that contains the centerline. The centerline of a surface can be obtained with the open source software vmtk (http://www.vmtk.org/) using the following script:
  vmtk vmtkcenterlines -seedselector openprofiles -ifile mysurface.stl -ofile centerlines.vtp –pipe vmtksurfacewriter -ifile centerlines.vtp -ofile centerlines.vtk
  Options:
  `FileName`
    File name for the centerlines
    type: string
    default value: `"centerlines.vtk"`
  `closeVolume`
    Action: Create In/Outlet planar faces
    type: integer
    default value: `0`
  `extrudeWall`
    Action: Extrude wall
    type: integer
    default value: `0`
  `hLayer`
    Thickness (% of radius) of the extruded layer
    type: float
    default value: `0.3`
  `hSecondLayer`
    Thickness (% of radius) of the second extruded layer
    type: float
    default value: `0.3`
  `nbElemLayer`
    Number of mesh elements the extruded layer
    type: integer
    default value: `3`
  `nbElemSecondLayer`
    Number of mesh elements the second extruded layer
    type: integer
    default value: `0`
  `nbPoints`
    Number of mesh elements in a circle
    type: integer
    default value: `25`
  `reMesh`
    Action: Cut the initial mesh in different mesh partitions using the centerlines
    type: integer
    default value: `0`

  Actions:

  `run`
    Run actions (closeVolume, extrudeWall, cutMesh)
`Curvature`
  Compute the curvature of Field[IField]:
  F = div(norm(grad(Field[IField])))
  Options:
  `Delta`
    Step of the finite differences
    type: float
    default value: `0`
  `IField`
    Field index
    type: integer
    default value: `1`
`Cylinder`
  The value of this field is VIn inside a frustrated cylinder, VOut outside. The cylinder is given by
  ||dX||^2 < R^2 &&
  (X-X0).A < ||A||^2
  dX = (X - X0) - ((X - X0).A)/(||A||^2) . A
  Options:
  `Radius`
    Radius
    type: float
    default value: `0`
  `VIn`
    Value inside the cylinder
    type: float
    default value: `0`
  `VOut`
    Value outside the cylinder
    type: float
    default value: `0`
  `XAxis`
    X component of the cylinder axis
    type: float
    default value: `0`
  `XCenter`
    X coordinate of the cylinder center
    type: float
    default value: `0`
  `YAxis`
    Y component of the cylinder axis
    type: float
    default value: `0`
  `YCenter`
    Y coordinate of the cylinder center
    type: float
    default value: `0`
  `ZAxis`
    Z component of the cylinder axis
    type: float
    default value: `1`
  `ZCenter`
    Z coordinate of the cylinder center
    type: float
    default value: `0`
`Frustum`
  This field is an extended cylinder with inner (i) and outer (o) radiuseson both endpoints (1 and 2). Length scale is bilinearly interpolated betweenthese locations (inner and outer radiuses, endpoints 1 and 2)The field values for a point P are given by : u = P1P.P1P2/||P1P2|| r = || P1P - u*P1P2 || Ri = (1-u)*R1i + u*R2i Ro = (1-u)*R1o + u*R2o v = (r-Ri)/(Ro-Ri) lc = (1-v)*( (1-u)*v1i + u*v2i ) + v*( (1-u)*v1o + u*v2o ) where (u,v) in [0,1]x[0,1]
  Options:
  `R1_inner`
    Inner radius of Frustum at endpoint 1
    type: float
    default value: `0`
  `R1_outer`
    Outer radius of Frustum at endpoint 1
    type: float
    default value: `1`
  `R2_inner`
    Inner radius of Frustum at endpoint 2
    type: float
    default value: `0`
  `R2_outer`
    Outer radius of Frustum at endpoint 2
    type: float
    default value: `1`
  `V1_inner`
    Element size at point 1, inner radius
    type: float
    default value: `0.1`
  `V1_outer`
    Element size at point 1, outer radius
    type: float
    default value: `1`
  `V2_inner`
    Element size at point 2, inner radius
    type: float
    default value: `0.1`
  `V2_outer`
    Element size at point 2, outer radius
    type: float
    default value: `1`
  `X1`
    X coordinate of endpoint 1
    type: float
    default value: `0`
  `X2`
    X coordinate of endpoint 2
    type: float
    default value: `0`
  `Y1`
    Y coordinate of endpoint 1
    type: float
    default value: `0`
  `Y2`
    Y coordinate of endpoint 2
    type: float
    default value: `0`
  `Z1`
    Z coordinate of endpoint 1
    type: float
    default value: `1`
  `Z2`
    Z coordinate of endpoint 2
    type: float
    default value: `2.26338226046034e+146`
`Gradient`
  Compute the finite difference gradient of Field[IField]:
  F = (Field[IField](X + Delta/2) - Field[IField](X - Delta/2)) / Delta
  Options:
  `Delta`
    Finite difference step
    type: float
    default value: `0`
  `IField`
    Field index
    type: integer
    default value: `1`
  `Kind`
    Component of the gradient to evaluate: 0 for X, 1 for Y, 2 for Z, 3 for the norm
    type: integer
    default value: `0`
`IntersectAniso`
  Take the intersection of 2 anisotropic fields according to Alauzet.
  Options:
  `FieldsList`
    Field indices
    type: list
    default value: `{}`
`Laplacian`
  Compute finite difference the Laplacian of Field[IField]:
  F = G(x+d,y,z) + G(x-d,y,z) +
  G(x,y+d,z) + G(x,y-d,z) +
  G(x,y,z+d) + G(x,y,z-d) - 6 * G(x,y,z),
  where G=Field[IField] and d=Delta
  Options:
  `Delta`
    Finite difference step
    type: float
    default value: `0.1`
  `IField`
    Field index
    type: integer
    default value: `1`
`LonLat`
  Evaluate Field[IField] in geographic coordinates (longitude, latitude):
  F = Field[IField](atan(y/x), asin(z/sqrt(x^2+y^2+z^2))
  Options:
  `FromStereo`
    if = 1, the mesh is in stereographic coordinates. xi = 2Rx/(R+z), eta = 2Ry/(R+z)
    type: integer
    default value: `0`
  `IField`
    Index of the field to evaluate.
    type: integer
    default value: `1`
  `RadiusStereo`
    radius of the sphere of the stereograpic coordinates
    type: float
    default value: `6371000`
`MathEval`
  Evaluate a mathematical expression. The expression can contain x, y, z for spatial coordinates, F0, F1, ... for field values, and and mathematical functions.
  Options:
  `F`
    Mathematical function to evaluate.
    type: string
    default value: `"F2 + Sin(z)"`

  Actions:

  `test`
    description blabla
`MathEvalAniso`
  Evaluate a metric expression. The expressions can contain x, y, z for spatial coordinates, F0, F1, ... for field values, and and mathematical functions.
  Options:
  `m11`
    element 11 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
  `m12`
    element 12 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
  `m13`
    element 13 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
  `m22`
    element 22 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
  `m23`
    element 23 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
  `m33`
    element 33 of the metric tensor.
    type: string
    default value: `"F2 + Sin(z)"`
`Max`
  Take the maximum value of a list of fields.
  Options:
  `FieldsList`
    Field indices
    type: list
    default value: `{}`
`MaxEigenHessian`
  Compute the maximum eigenvalue of the Hessian matrix of Field[IField], with the gradients evaluated by finite differences:
  F = max(eig(grad(grad(Field[IField]))))
  Options:
  `Delta`
    Step used for the finite differences
    type: float
    default value: `0`
  `IField`
    Field index
    type: integer
    default value: `1`
`Mean`
  Simple smoother:
  F = (G(x+delta,y,z) + G(x-delta,y,z) +
  G(x,y+delta,z) + G(x,y-delta,z) +
  G(x,y,z+delta) + G(x,y,z-delta) +
  G(x,y,z)) / 7,
  where G=Field[IField]
  Options:
  `Delta`
    Distance used to compute the mean value
    type: float
    default value: `0.0001`
  `IField`
    Field index
    type: integer
    default value: `0`
`Min`
  Take the minimum value of a list of fields.
  Options:
  `FieldsList`
    Field indices
    type: list
    default value: `{}`
`MinAniso`
  Take the intersection of a list of possibly anisotropic fields.
  Options:
  `FieldsList`
    Field indices
    type: list
    default value: `{}`
`Param`
  Evaluate Field IField in parametric coordinates:
  F = Field[IField](FX,FY,FZ)
  See the MathEval Field help to get a description of valid FX, FY and FZ expressions.
  Options:
  `FX`
    X component of parametric function
    type: string
    default value: `""`
  `FY`
    Y component of parametric function
    type: string
    default value: `""`
  `FZ`
    Z component of parametric function
    type: string
    default value: `""`
  `IField`
    Field index
    type: integer
    default value: `1`
`PostView`
  Evaluate the post processing view IView.
  Options:
  `CropNegativeValues`
    return LC_MAX instead of a negative value (this option is needed for backward compatibility with the BackgroundMesh option
    type: boolean
    default value: `1`
  `IView`
    Post-processing view index
    type: integer
    default value: `0`
`Restrict`
  Restrict the application of a field to a given list of geometrical points, curves, surfaces or volumes.
  Options:
  `EdgesList`
    Curve indices
    type: list
    default value: `{}`
  `FacesList`
    Surface indices
    type: list
    default value: `{}`
  `IField`
    Field index
    type: integer
    default value: `1`
  `RegionsList`
    Volume indices
    type: list
    default value: `{}`
  `VerticesList`
    Point indices
    type: list
    default value: `{}`
`Structured`
  Linearly interpolate between data provided on a 3D rectangular structured grid.
  The format of the input file is:
  Ox Oy Oz
  Dx Dy Dz
  nx ny nz
  v(0,0,0) v(0,0,1) v(0,0,2) ...
  v(0,1,0) v(0,1,1) v(0,1,2) ...
  v(0,2,0) v(0,2,1) v(0,2,2) ...
  ... ... ...
  v(1,0,0) ... ...
  where O are the coordinates of the first node, D are the distances between nodes in each direction, n are the numbers of nodes in each direction, and v are the values on each node.
  Options:
  `FileName`
    Name of the input file
    type: path
    default value: `""`
  `OutsideValue`
    Value of the field outside the grid (only used if the "SetOutsideValue" option is true).
    type: float
    default value: `0`
  `SetOutsideValue`
    True to use the "OutsideValue" option. If False, the last values of the grid are used.
    type: boolean
    default value: `0`
  `TextFormat`
    True for ASCII input files, false for binary files (4 bite signed integers for n, double precision floating points for v, D and O)
    type: boolean
    default value: `0`
`Threshold`
  F = LCMin if Field[IField] <= DistMin,
  F = LCMax if Field[IField] >= DistMax,
  F = interpolation between LcMin and LcMax if DistMin < Field[IField] < DistMax
  Options:
  `DistMax`
    Distance from entity after which element size will be LcMax
    type: float
    default value: `10`
  `DistMin`
    Distance from entity up to which element size will be LcMin
    type: float
    default value: `1`
  `IField`
    Index of the field to evaluate
    type: integer
    default value: `0`
  `LcMax`
    Element size outside DistMax
    type: float
    default value: `1`
  `LcMin`
    Element size inside DistMin
    type: float
    default value: `0.1`
  `Sigmoid`
    True to interpolate between LcMin and LcMax using a sigmoid, false to interpolate linearly
    type: boolean
    default value: `0`
  `StopAtDistMax`
    True to not impose element size outside DistMax (i.e., F = a very big value if Field[IField] > DistMax)
    type: boolean
    default value: `0`

Next: Miscellaneous mesh commands, Previous: Specifying mesh element sizes, Up: Mesh commands

#### 6.3.2 Structured grids

`Extrude {` expression-list`} {` extrude-list layers`}`
  Extrudes both the geometry and the mesh using a translation (see Extrusions). The layers option determines how the mesh is extruded and has the following syntax:

                layers:
                  Layers { expression } |
                  Layers { { expression-list }, { expression-list } } |
                  Recombine; ...
                  QuadTriNoNewVerts <RecombLaterals>; |
                  QuadTriAddVerts <RecombLaterals>; ...

  In the first `Layers` form, expression gives the number of elements to be created in the (single) layer. In the second form, the first expression-list defines how many elements should be created in each extruded layer, and the second expression-list gives the normalized height of each layer (the list should contain a sequence of n numbers 0 < h1 < h2 < ... < hn <= 1). See t3.geo, for an example.

  For line extrusions, the `Recombine` option will recombine triangles into quadrangles when possible. For surface extrusions, the `Recombine` option will recombine tetrahedra into prisms, hexahedra or pyramids.

  Please note that, starting with Gmsh 2.0, region numbers cannot be specified explicitly anymore in `Layers` commands. Instead, as with all other geometry commands, you must use the automatically created entity identifier created by the extrusion command. For example, the following extrusion command will return the id of the new “top” surface in `num[0]` and the id of the new volume in `num[1]`:

                num[] = Extrude {0,0,1} { Surface{1}; Layers{10}; };

  `QuadTriNoNewVerts` and `QuadTriAddVerts` allow to connect structured, extruded volumes containing quadrangle-faced elements to structured or unstructured tetrahedral volumes, by subdividing into triangles any quadrangles on boundary surfaces shared with tetrahedral volumes. (They have no effect for 1D or 2D extrusions.) `QuadTriNoNewVerts` subdivides any of the region's quad-faced 3D elements that touch these boundary triangles into pyramids, prisms, or tetrahedra as necessary, all WITHOUT adding new vertices. `QuadTriAddVerts` works in a simular way, but subdivides 3D elements touching the boundary triangles by adding a new vertex inside each element at the vertex-based centroid. Either method results in a structured extrusion with an outer layer of subdivided elements that interface the inner, unmodified elements to the triangle-meshed region boundaries.

  In some rare cases, due to certain lateral boundary conditions, it may not be possible make a valid element subdivision with `QuadTriNoNewVerts` without adding additional vertices. In this case, an internal vertex is created at the vertex-based centroid of the element. The element is then divided using that vertex. When an internal vertex is created with `QuadTriNoNewVerts`, the user is alerted by a warning message sent for each instance; however, the mesh will still be valid and conformal.

  Both `QuadTriNoNewVerts` and `QuadTriAddVerts` can be used with the optional `RecombLaterals` keyword. By default, the QuadTri algorithms will mesh any free laterals as triangles, if possible. `RecombLaterals` forces any free laterals to remain as quadrangles, if possible. Lateral surfaces between two QuadTri regions will always be meshed as quadrangles.

  Note that the QuadTri algorithms will handle all potential meshing conflicts along the lateral surfaces of the extrusion. In other words, QuadTri will not subdivide a lateral that must remain as quadrangles, nor will it leave a lateral as quadrangles if it must be divided. The user should therefore feel free to mix different types of neighboring regions with a QuadTri meshed region; the mesh should work. However, be aware that the top surface of the QuadTri extrusion will always be meshed as triangles, unless it is extruded back onto the original source in a toroidal loop (a case which also works with QuadTri).

  `QuadTriNoNewVerts` and `QuadTriAddVerts` may be used interchangeably, but `QuadTriAddVerts` often gives better element quality.

  If the user wishes to interface a structured extrusion to a tetrahedral volume without modifying the original structured mesh, the user may create dedicated interface volumes around the structured geometry and apply a QuadTri algorithm to those volumes only.

`Extrude { {` expression-list`}, {` expression-list`},` expression`} {` extrude-list layers`}`
  Extrudes both the geometry and the mesh using a rotation (see Extrusions). The layers option is defined as above.
`Extrude { {` expression-list`}, {` expression-list`}, {` expression-list`},` expression`} {` extrude-list layers`}`
  Extrudes both the geometry and the mesh using a combined translation and rotation (see Extrusions). The layers option is defined as above.
`Extrude { Surface {` expression-list`};` layers`< Using Index[`expr`]; > < Using View[`expr`]; > < ScaleLastLayer; > }`
  Extrudes a boundary layer from the specified surfaces. If no view is specified, the boundary layer is created using gouraud-shaped (smoothed) normal field. Specifying a boundary layer index allows to extrude several independent boundary layers (with independent normal smoothing).

  `ScaleLastLayer` scales the height of the last (top) layer of each normal's extrusion by the average length of the edges in all the source elements that contain the source vertex (actually, the average of the averages for each element–edges actually touching the source vertex are counted twice). This allows the height of the last layer to vary along with the size of the source elements in order to achieve better element quality. For example, in a boundary layer extruded with the Layers definition 'Layers{ {1,4,2}, {0.5, 0.6, 1.6} },' a source vertex adjacent to elements with an overall average edge length of 5.0 will extrude to have a last layer height = (1.6-0.6) * 5.0 = 5.0.

`Transfinite Line {` expression-list`} | "*" =` expression`< Using Progression | Bump` expression`>;`
  Selects the lines in expression-list to be meshed with the 1D transfinite algorithm. The expression on the right hand side gives the number of nodes that will be created on the line (this overrides any other mesh element size prescription—see Specifying mesh element sizes). The optional argument ``Using Progression` expression' instructs the transfinite algorithm to distribute the nodes following a geometric progression (`Progression 2` meaning for example that each line element in the series will be twice as long as the preceding one). The optional argument ``Using Bump` expression' instructs the transfinite algorithm to distribute the nodes with a refinement at both ends of the line.
`Transfinite Surface {` expression-list`} | "*" < = {` expression-list`} > < Left | Right | Alternate | AlternateRight | AlternateLeft > ;`
  Selects surfaces to be meshed with the 2D transfinite algorithm. The expression-list on the right-hand-side should contain the identification numbers of three or four points on the boundary of the surface that define the corners of the transfinite interpolation. If no identification numbers are given, the transfinite algorithm will try to find the corners automatically. The optional argument specifies the way the triangles are oriented when the mesh is not recombined. (`Alternate` is a synonym for `AlternateRight`).
`Transfinite Volume {` expression-list`} | "*" < = {` expression-list`} > ;`
  Selects five- or six-face volumes to be meshed with the 3D transfinite algorithm. The expression-list on the right-hand-side should contain the identification numbers of the six or eight points on the boundary of the volume that define the corners of the transfinite interpolation. If no identification numbers are given, the transfinite algorithm will try to find the corners automatically.
`TransfQuadTri {` expression-list`} | "*";`
  Applies the transfinite QuadTri algorithm on the expression-list list of volumes (`"*"` can be used to apply TransfQuadTri to all existing volumes). A transfinite volume with any combination of recombined and un-recombined transfinite boundary surfaces is valid when meshed with `TransfQuadTri`. When applied to non-Transfinite volumes, TransfQuadTri has no effect on those volumes.

Previous: Structured grids, Up: Mesh commands

#### 6.3.3 Miscellaneous

Here is a list of all other mesh commands currently available:

`Point | Line {` expression-list`} In Surface {` expression`};`
  Embed the point(s) or line(s) in the given surface. The surface mesh will conform to the mesh of the point(s) or lines(s).
`Surface {` expression-list`} In Volume {` expression`};`
  Embed the surface in the given volume. The volume mesh will conform to the mesh of the surface.
`Periodic Line {` expression-list`} = {` expression-list`} ;`
  Force mesh of lines on the left-hand side (slaves) to match the mesh of the lines on the right-hand side (masters).
`Periodic Surface` expression`{` expression-list`} =` expression`{` expression-list`} ;`
  Force mesh of the surface on the left-hand side (slave, with boundary edges specified between braces) to match the mesh of the surface on the right-hand side (master, with boundary edges specified between braces).
`Periodic Line | Surface {` expression-list`} = {` expression-list`} Affine | Rotate | Translate {` expression-list`} ;`
  Force mesh of lines or surfaces on the left-hand side (slaves) to match the mesh of the lines on the right-hand side (masters), using prescribed geometrical transformations. `Affine` takes a 4 x 4 affine transform matrix given by row; `Rotate` and `Translate` are specified as in Transformations.
`Coherence Mesh;`
  Removes all duplicate mesh vertices.
`SetPartition` expression`{ Point | Line | Surface | Volume {` expression-list`}; ... }`
  Sets the partition tag of the mesh elements in the entities in expression-list to expression.
`< Recursive > Color` color-expression`{ Point | Line | Surface | Volume {` expression-list`}; ... }`
  Sets the mesh color of the entities in expression-list to color-expression.
`< Recursive > Hide { Point | Line | Surface | Volume {` expression-list`}; ... }`
  Hides the mesh of the entities in expression-list, if `General.VisibilityMode` is set to `0` or `2`.
`Hide` char-expression`;`
  Hides the mesh of the entity char-expression, if `General.VisibilityMode` is set to `0` or `2` (char-expression can for example be `"*"`).
`Recombine Surface {` expression-list`} | "*" < =` expression`>;`
  Recombines the triangular meshes of the surfaces listed in expression-list into mixed triangular/quadrangular meshes. The optional expression on the right hand side specifies the maximum difference (in degrees) allowed between the largest angle of a quadrangle and a right angle (a value of 0 would only accept quadrangles with right angles; a value of 90 would allow degenerate quadrangles; default value is 45).
`Reverse Line | Surface {` expression-list`} | "*" ;`
  Reverses the mesh of the given line(s) or surface(s).
`Save` char-expression`;`
  Saves the mesh in a file named char-expression, using the current `Mesh.Format` (see Mesh options list). If the path in char-expression is not absolute, char-expression is appended to the path of the current file.
`CreateDir` char-expression`;`
  Create the directory char-expression.
`< Recursive > Show { Point | Line | Surface | Volume {` expression-list`}; ... }`
  Shows the mesh of the entities in expression-list, if `General.VisibilityMode` is set to `0` or `2`.
`Show` char-expression`;`
  Shows the mesh of the entity char-expression, if `General.VisibilityMode` is set to `0` or `2` (char-expression can for example be `"*"`).
`Smoother Surface {` expression-list`} =` expression`;`
  Sets number of elliptic smoothing steps for the surfaces listed in expression-list (smoothing only applies to transfinite meshes at the moment).
`Homology ( {` expression-list`} ) { {` expression-list`} , {` expression-list`} };`
  Compute a basis representation for homology spaces after a mesh has been generated. The first expression-list is a list of dimensions whose homology bases are computed; if empty, all bases are computed. The second expression-list is a list physical groups that constitute the computation domain; if empty, the whole mesh is the domain. The third expression-list is a list of physical groups that constitute the relative subdomain of relative homology computation; if empty, absolute homology is computed. Resulting basis representation chains are stored as physical groups in the mesh.
`Cohomology ( {` expression-list`} ) { {` expression-list`} , {` expression-list`} };`
  Similar to command `Homology`, but computes a basis representation for cohomology spaces instead.

Previous: Mesh commands, Up: Mesh module

### 6.4 Mesh options

The list of all the options that control the behavior of mesh commands, as well as the way meshes are displayed in the GUI, is given in Mesh options list.

Next: Post-processing module, Previous: Mesh module, Up: Top

## 7 Solver module

External solvers can be driven by Gmsh through the ONELAB http://www.onelab.info interface. To add a new solver in the solver module, you need to specify its name (`Solver.Name0`, `Solver.Name1`, etc.) and the path to the executable (`Solver.Executable0`, `Solver.Executable1`, etc.); see Solver options list).

The client-server API for the solver interface is defined in the onelab.h 23 header. See utils/solvers/c++/solver.cpp for a simple example on how to use the ONELAB programming interface. See the sources of GetDP (http://geuz.org/getdp for a more comprehensive example.

Previous: Solver module, Up: Solver module

### 7.1 Solver options

The list of all the solver options is given in Solver options list.

Next: File formats, Previous: Solver module, Up: Top

## 8 Post-processing module

Gmsh's post-processing module can handle multiple scalar, vector or tensor datasets along with the geometry and the mesh. The datasets can be given in several formats: in human-readable “parsed” format (these are just part of a standard input script, but are usually put in separate files with a `.pos` extension), in native MSH files (ASCII or binary files with `.msh` extensions: see File formats), or in standard third-party formats (like MED: http://www.code-aster.org/outils/med/).

Once loaded into Gmsh, scalar fields can be displayed as iso-value lines and surfaces or color maps, whereas vector fields can be represented either by three-dimensional arrows or by displacement maps. (Tensor fields are currently displayed as Von-Mises effective stresses, min/max eigenvalues, eigenvectors, ellipsis or ellipsoid. To display other (combinations of) components, you can use the `Force scalar` or `Force vector` options, or use `Plugin(MathEval)`: see Post-processing plugins.)

In Gmsh's jargon, each dataset is called a “view”. Each view is given a name, and can be manipulated either individually (each view has its own button in the GUI and can be referred to by its index in a script) or globally (see the `PostProcessing.Link` option in Post-processing options list).

By default, Gmsh treats all post-processing views as three-dimensional plots, i.e., draws the scalar, vector and tensor primitives (points, lines, triangles, tetrahedra, etc.) in 3D space. But Gmsh can also represent each post-processing view containing scalar points as two-dimensional (“X-Y”) plots, either space- or time-oriented:

- in a `2D space' plot, the scalar points are taken in the same order as they are defined in the post-processing view: the abscissa of the 2D graph is the curvilinear abscissa of the curve defined by the point series, and only one curve is drawn using the values associated with the points. If several time steps are available, each time step generates a new curve;
- in a `2D time' plot, one curve is drawn for each scalar point in the view and the abscissa is the time step.

Although visualization is usually mostly an interactive task, Gmsh exposes all the post-processing commands and options to the user in its scripting language to permit a complete automation of the post-processing process (see e.g., t8.geo, and t9.geo).

The two following sections summarize all available post-processing commands and options. Most options apply to both 2D and 3D plots (colormaps, point/line sizes, interval types, time step selection, etc.), but some are peculiar to 3D (lightning, element selection, etc.) or 2D plots (abscissa labels, etc.). Note that 2D plots can be positioned explicitly inside the graphical window, or be automatically positioned in order to avoid overlaps.

Sample post-processing files in human-readable “parsed” format and in the native MSH file format are available in the tutorial 24 directory of Gmsh's distribution (`.pos` and `.msh` files). The “parsed” format is defined in the next section (cf. the `View` command); the MSH format is defined in File formats.

Next: Post-processing plugins, Previous: Post-processing module, Up: Post-processing module

### 8.1 Post-processing commands

`Alias View[`expression`];`
  Creates an alias of the expression-th post-processing view.

  Note that `Alias` creates a logical duplicate of the view without actually duplicating the data in memory. This is very useful when you want multiple simultaneous renderings of the same large dataset (usually with different display options), but you cannot afford to store all copies in memory. If what you really want is multiple physical copies of the data, just merge the file containing the post-processing view multiple times.

`AliasWithOptions View[`expression`];`
  Creates an alias of the expression-th post-processing view and copies all the options of the expression-th view to the new aliased view.
`CopyOptions View[`expression`,` expression`];`
  Copy all the options from the first expression-th post-processing view to the second one.
`Combine ElementsByViewName;`
  Combines all the post-processing views having the same name into new views. The combination is done “spatially”, i.e., simply by appending the elements at the end of the new views.
`Combine ElementsFromAllViews | Combine Views;`
  Combines all the post-processing views into a single new view. The combination is done “spatially”, i.e., simply by appending the elements at the end of the new view.
`Combine ElementsFromVisibleViews;`
  Combines all the visible post-processing views into a single new view. The combination is done “spatially”, i.e., simply by appending the elements at the end of the new view.
`Combine TimeStepsByViewName | Combine TimeSteps;`
  Combines the data from all the post-processing views having the same name into new multi-time-step views. The combination is done “temporally”, i.e., as if the data in each view corresponds to a different time instant. The combination will fail if the meshes in all the views are not identical.
`Combine TimeStepsFromAllViews;`
  Combines the data from all the post-processing views into a new multi-time-step view. The combination is done “temporally”, i.e., as if the data in each view corresponds to a different time instant. The combination will fail if the meshes in all the views are not identical.
`Combine TimeStepsFromVisibleViews;`
  Combines the data from all the visible post-processing views into a new multi-time-step view. The combination is done “temporally”, i.e., as if the data in each view corresponds to a different time instant. The combination will fail if the meshes in all the views are not identical.
`Delete View[`expression`];`
  Deletes (removes) the expression-th post-processing view. Note that post-processing view numbers start at 0.
`Delete Empty Views;`
  Deletes (removes) all the empty post-processing views.
`Background Mesh View[`expression`];`
  Applies the expression-th post-processing view as the current background mesh. Note that post-processing view numbers start at 0.
`Plugin (`string`) . Run;`
  Executes the plugin string. The list of default plugins is given in Post-processing plugins.
`Plugin (`string`) .` string`=` expression`|` char-expression`;`
  Sets an option for a given plugin. See Post-processing plugins, for a list of default plugins and t9.geo, for some examples.
`Save View[`expression`]` char-expression`;`
  Saves the the expression-th post-processing view in a file named char-expression. If the path in char-expression is not absolute, char-expression is appended to the path of the current file.
`View "`string`" {` string`< (` expression-list`) > {` expression-list`}; ... };`
  Creates a new post-processing view, named `"`string`"`. This is an easy and quite powerful way to import post-processing data: all the values are expressions, you can embed datasets directly into your geometrical descriptions (see, e.g., t4.geo), the data can be easily generated “on-the-fly” (there is no header containing a priori information on the size of the dataset). The syntax is also very permissive, which makes it ideal for testing purposes.

  However this “parsed format” is read by Gmsh's script parser, which makes it inefficient if there are many elements in the dataset. Also, there is no connectivity information in parsed views and all the elements are independent (all fields can be discontinuous), so a lot of information can be duplicated. For large datasets, you should thus use the mesh-based post-processing file format described in File formats, or use one of the standard formats like MED.

  More explicitly, the syntax for a parsed `View` is the following

                View "string" {
                  type ( list-of-coords ) { list-of-values }; ...
                  < TIME { expression-list }; >
                  < INTERPOLATION_SCHEME { val-coef-matrix } { val-exp-matrix }
                                  < { geo-coef-matrix } { geo-exp-matrix } > ; >
                };

  where the 47 object types that can be displayed are:

                                              type  #list-of-coords  #list-of-values
                --------------------------------------------------------------------
                Scalar point                  SP    3            1  * nb-time-steps
                Vector point                  VP    3            3  * nb-time-steps
                Tensor point                  TP    3            9  * nb-time-steps
                Scalar line                   SL    6            2  * nb-time-steps
                Vector line                   VL    6            6  * nb-time-steps
                Tensor line                   TL    6            18 * nb-time-steps
                Scalar triangle               ST    9            3  * nb-time-steps
                Vector triangle               VT    9            9  * nb-time-steps
                Tensor triangle               TT    9            27 * nb-time-steps
                Scalar quadrangle             SQ    12           4  * nb-time-steps
                Vector quadrangle             VQ    12           12 * nb-time-steps
                Tensor quadrangle             TQ    12           36 * nb-time-steps
                Scalar tetrahedron            SS    12           4  * nb-time-steps
                Vector tetrahedron            VS    12           12 * nb-time-steps
                Tensor tetrahedron            TS    12           36 * nb-time-steps
                Scalar hexahedron             SH    24           8  * nb-time-steps
                Vector hexahedron             VH    24           24 * nb-time-steps
                Tensor hexahedron             TH    24           72 * nb-time-steps
                Scalar prism                  SI    18           6  * nb-time-steps
                Vector prism                  VI    18           18 * nb-time-steps
                Tensor prism                  TI    18           54 * nb-time-steps
                Scalar pyramid                SY    15           5  * nb-time-steps
                Vector pyramid                VY    15           15 * nb-time-steps
                Tensor pyramid                TY    15           45 * nb-time-steps
                2D text                       T2    3            arbitrary
                3D text                       T3    4            arbitrary

  The coordinates are given `by node', i.e.,

  - `(`coord1`,` coord2`,` coord3`)` for a point,
  - `(`coord1-node1`,` coord2-node1`,` coord3-node1`,`
    coord1-node2`,` coord2-node2`,` coord3-node2`)` for a line,
  - `(`coord1-node1`,` coord2-node1`,` coord3-node1`,`
    coord1-node2`,` coord2-node2`,` coord3-node2`,`
    coord1-node3`,` coord2-node3`,` coord3-node3`)` for a triangle,
  - etc.

  The ordering of the nodes is given in Node ordering.

  The values are given by time step, by node and by component, i.e.:

                comp1-node1-time1, comp2-node1-time1, comp3-node1-time1,
                comp1-node2-time1, comp2-node2-time1, comp3-node2-time1,
                comp1-node3-time1, comp2-node3-time1, comp3-node3-time1,
                comp1-node1-time2, comp2-node1-time2, comp3-node1-time2,
                comp1-node2-time2, comp2-node2-time2, comp3-node2-time2,
                comp1-node3-time2, comp2-node3-time2, comp3-node3-time2,
                ...

  For the 2D text objects, the two first expressions in list-of-coords give the X-Y position of the string in screen coordinates, measured from the top-left corner of the window. If the first (respectively second) expression is negative, the position is measured from the right (respectively bottom) edge of the window. If the value of the first (respectively second) expression is larger than 99999, the string is centered horizontally (respectively vertically). If the third expression is equal to zero, the text is aligned bottom-left and displayed using the default font and size. Otherwise, the third expression is converted into an integer whose eight lower bits give the font size, whose eight next bits select the font (the index corresponds to the position in the font menu in the GUI), and whose eight next bits define the text alignment (0=bottom-left, 1=bottom-center, 2=bottom-right, 3=top-left, 4=top-center, 5=top-right, 6=center-left, 7=center-center, 8=center-right).

  For the 3D text objects, the three first expressions in list-of-coords give the XYZ position of the string in model (real world) coordinates. The fourth expression has the same meaning as the third expression in 2D text objects.

  For both 2D and 3D text objects, the list-of-values can contain an arbitrary number of char-expressions. If the char-expression starts with `file://`, the remainder of the string is interpreted as the name of an image file, and the image is displayed instead of the string. A format string in the form `@wxh` or `@wxh,wx,wy,wz,hx,hy,hz`, where `w` and `h` are the width and height (in model coordinates for `T3` or in pixels for `T2`) of the image, `wx,wy,wz` is the direction of the bottom edge of the image and `hx,hy,hz` is the direction of the left edge of the image.

  The optional `TIME` list can contain a list of expressions giving the value of the time (or any other variable) for which an evolution was saved.

  The optional `INTERPOLATION_SCHEME` lists can contain the interpolation matrices used for high-order adaptive visualization.

  Let us assume that the approximation of the view's value over an element is written as a linear combination of d basis functions f[i], i=0, ..., d-1 (the coefficients being stored in list-of-values). Defining f[i] = Sum(j=0, ..., d-1) F[i][j] p[j], with p[j] = u^P[j][0] v^P[j][1] w^P[j][2] (u, v and w being the coordinates in the element's parameter space), then val-coef-matrix denotes the d x d matrix F and val-exp-matrix denotes the d x 3 matrix P.

  In the same way, let us also assume that the coordinates x, y and z of the element are obtained through a geometrical mapping from parameter space as a linear combination of m basis functions g[i], i=0, ..., m-1 (the coefficients being stored in list-of-coords). Defining g[i] = Sum(j=0, ..., m-1) G[i][j] q[j], with q[j] = u^Q[j][0] v^Q[j][1] w^Q[j][2], then val-coef-matrix denotes the m x m matrix G and val-exp-matrix denotes the m x 3 matrix Q.

  Here are for example the interpolation matrices for a first order quadrangle:

                INTERPOLATION_SCHEME
                {
                  {1/4,-1/4, 1/4,-1/4},
                  {1/4, 1/4,-1/4,-1/4},
                  {1/4, 1/4, 1/4, 1/4},
                  {1/4,-1/4,-1/4, 1/4}
                }
                {
                  {0, 0, 0},
                  {1, 0, 0},
                  {0, 1, 0},
                  {1, 1, 0}
                };

Next: Post-processing options, Previous: Post-processing commands, Up: Post-processing module

### 8.2 Post-processing plugins

Post-processing plugins permit to extend the functionality of Gmsh's post-processing module. The difference between regular post-processing options (see Post-processing options list) and post-processing plugins is that regular post-processing options only change the way the data is displayed, while post-processing plugins either create new post-processing views, or modify the data stored in a view (in a destructive, non-reversible way).

Plugins are available in the GUI by right-clicking on a view button (or by clicking on the black arrow next to the view button) and then selecting the `Plugin' submenu.

Here is the list of the plugins that are shipped by default with Gmsh:

`Plugin(AnalyseCurvedMesh)`
  Plugin(AnalyseCurvedMesh) analyse all elements of a given dimension. It computes, min(J) where J is the scaled Jacobian determinant and, if asked, min(R) where R is the ratio between the smaller and the greater of the eigenvalues of the metric. It creates a PView and hides elements for which min({J, R}) < 'Hidding threshold'.
  J is faster to compute but gives informations only on validity while R gives also informations on quality.
  Parameters:
  - Show [...] = {0, 1, 2}: If 0, computes Jacobian and shows min(J). If 1, computes Jacobian and metric and shows min(R). If 2, behaves like it is 1 but draw the two min(J) and min(R) PView
  - Draw PView = {0, 1}: Creates a PView of min({J, R}) if it does not exist already. If 'Recompute' = 1, a new PView is redrawed.
  - Hidding threshold = [0,1]: Hides all element for which min(R) or min(J) is strictly greater than the threshold. If = 1, no effect, if = 0 hide all elements except invalid.
  - Dimension = {-1, 1, 2, 3, 4}: If = -1, analyse element of the greater dimension. If = 4, analyse 2D and 3D elements
  - Recompute = {0,1}: If the mesh has changed, set to 1 to recompute the bounds.
  - Tolerance = ]0, 1[: Tolerance on the computation of min({R, J}). It should be at most 0.01 but it can be set to 1 or greater to just check the validity of the mesh. Numeric options:
  `Show: 0:J, 1:R, 2:J&&R`
    Default value: `1`
  `Draw PView`
    Default value: `1`
  `Hidding threshold`
    Default value: `10`
  `Dimension of elements`
    Default value: `-1`
  `Recompute bounds`
    Default value: `0`
  `Tolerance`
    Default value: `0.001`
`Plugin(Annotate)`
  Plugin(Annotate) adds the text string `Text', in font `Font' and size `FontSize', in the view `View'. The string is aligned according to `Align'.
  If `ThreeD' is equal to 1, the plugin inserts the string in model coordinates at the position (`X',`Y',`Z'). If `ThreeD' is equal to 0, the plugin inserts the string in screen coordinates at the position (`X',`Y').
  If `View' < 0, the plugin is run on the current view.
  Plugin(Annotate) is executed in-place for list-based datasets or creates a new view for other datasets. String options:
  `Text`
    Default value: `"My Text"`
  `Font`
    Default value: `"Helvetica"`
  `Align`
    Default value: `"Left"`
  Numeric options:
  `X`
    Default value: `50`
  `Y`
    Default value: `30`
  `Z`
    Default value: `0`
  `ThreeD`
    Default value: `0`
  `FontSize`
    Default value: `14`
  `View`
    Default value: `-1`
`Plugin(Bubbles)`
  Plugin(Bubbles) constructs a geometry consisting of `bubbles' inscribed in the Voronoi of an input triangulation. `ShrinkFactor' allows to change the size of the bubbles. The plugin expects a triangulation in the `z = 0' plane to exist in the current model.
  Plugin(Bubbles) creates one `.geo' file. String options:
  `OutputFile`
    Default value: `"bubbles.geo"`
  Numeric options:
  `ShrinkFactor`
    Default value: `0`
`Plugin(Crack)`
  Plugin(Crack) creates a crack around the physical group `PhysicalGroup' of dimension `Dimension' (1 or 2). The plugin duplicates the vertices and the elements on the crack and stores them in a new discrete curve (`Dimension' = 1) or surface (`Dimension' = 2). The elements touching the crack on the negative side are modified to use the newly generated vertices.If `OpenBoundaryPhysicalGroup' is given (> 0), its vertices are duplicated and the crack will be left open on that (part of the) boundary. Otherwise, the lips of the crack are sealed, i.e., its vertices are not duplicated. Numeric options:
  `Dimension`
    Default value: `1`
  `PhysicalGroup`
    Default value: `1`
  `OpenBoundaryPhysicalGroup`
    Default value: `0`
`Plugin(Curl)`
  Plugin(Curl) computes the curl of the field in the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Curl) creates one new view. Numeric options:
  `View`
    Default value: `-1`
`Plugin(CurvedBndDist)`
  Plugin(CurvedBndDist) ...
`Plugin(CutBox)`
  Plugin(CutBox) cuts the view `View' with a rectangular box defined by the 4 points (`X0',`Y0',`Z0') (origin), (`X1',`Y1',`Z1') (axis of U), (`X2',`Y2',`Z2') (axis of V) and (`X3',`Y3',`Z3') (axis of W).
  The number of points along U, V, W is set with the options `NumPointsU', `NumPointsV' and `NumPointsW'.
  If `ConnectPoints' is zero, the plugin creates points; otherwise, the plugin generates hexahedra, quadrangles, lines or points depending on the values of `NumPointsU', `NumPointsV' and `NumPointsW'.
  If `Boundary' is zero, the plugin interpolates the view inside the box; otherwise the plugin interpolates the view at its boundary.
  If `View' < 0, the plugin is run on the current view.
  Plugin(CutBox) creates one new view. Numeric options:
  `X0`
    Default value: `0`
  `Y0`
    Default value: `0`
  `Z0`
    Default value: `0`
  `X1`
    Default value: `1`
  `Y1`
    Default value: `0`
  `Z1`
    Default value: `0`
  `X2`
    Default value: `0`
  `Y2`
    Default value: `1`
  `Z2`
    Default value: `0`
  `X3`
    Default value: `0`
  `Y3`
    Default value: `0`
  `Z3`
    Default value: `1`
  `NumPointsU`
    Default value: `20`
  `NumPointsV`
    Default value: `20`
  `NumPointsW`
    Default value: `20`
  `ConnectPoints`
    Default value: `1`
  `Boundary`
    Default value: `1`
  `View`
    Default value: `-1`
`Plugin(CutGrid)`
  Plugin(CutGrid) cuts the view `View' with a rectangular grid defined by the 3 points (`X0',`Y0',`Z0') (origin), (`X1',`Y1',`Z1') (axis of U) and (`X2',`Y2',`Z2') (axis of V).
  The number of points along U and V is set with the options `NumPointsU' and `NumPointsV'.
  If `ConnectPoints' is zero, the plugin creates points; otherwise, the plugin generates quadrangles, lines or points depending on the values of `NumPointsU' and `NumPointsV'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(CutGrid) creates one new view. Numeric options:
  `X0`
    Default value: `0`
  `Y0`
    Default value: `0`
  `Z0`
    Default value: `0`
  `X1`
    Default value: `1`
  `Y1`
    Default value: `0`
  `Z1`
    Default value: `0`
  `X2`
    Default value: `0`
  `Y2`
    Default value: `1`
  `Z2`
    Default value: `0`
  `NumPointsU`
    Default value: `20`
  `NumPointsV`
    Default value: `20`
  `ConnectPoints`
    Default value: `1`
  `View`
    Default value: `-1`
`Plugin(CutParametric)`
  Plugin(CutParametric) cuts the view `View' with the parametric function (`X'(u,v), `Y'(u,v), `Z'(u,v)), using `NumPointsU' values of the parameter u in [`MinU', `MaxU'] and `NumPointsV' values of the parameter v in [`MinV', `MaxV'].
  If `ConnectPoints' is set, the plugin creates surface or line elements; otherwise, the plugin generates points.
  If `View' < 0, the plugin is run on the current view.
  Plugin(CutParametric) creates one new view. String options:
  `X`
    Default value: `"2 * Cos(u) * Sin(v)"`
  `Y`
    Default value: `"4 * Sin(u) * Sin(v)"`
  `Z`
    Default value: `"0.1 + 0.5 * Cos(v)"`
  Numeric options:
  `MinU`
    Default value: `0`
  `MaxU`
    Default value: `6.2832`
  `NumPointsU`
    Default value: `180`
  `MinV`
    Default value: `0`
  `MaxV`
    Default value: `6.2832`
  `NumPointsV`
    Default value: `180`
  `ConnectPoints`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(CutPlane)`
  Plugin(CutPlane) cuts the view `View' with the plane `A'*X + `B'*Y + `C'*Z + `D' = 0.
  If `ExtractVolume' is nonzero, the plugin extracts the elements on one side of the plane (depending on the sign of `ExtractVolume').
  If `View' < 0, the plugin is run on the current view.
  Plugin(CutPlane) creates one new view. Numeric options:
  `A`
    Default value: `1`
  `B`
    Default value: `0`
  `C`
    Default value: `0`
  `D`
    Default value: `-0.01`
  `ExtractVolume`
    Default value: `0`
  `RecurLevel`
    Default value: `4`
  `TargetError`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(CutSphere)`
  Plugin(CutSphere) cuts the view `View' with the sphere (X-`Xc')^2 + (Y-`Yc')^2 + (Z-`Zc')^2 = `R'^2.
  If `ExtractVolume' is nonzero, the plugin extracts the elements inside (if `ExtractVolume' < 0) or outside (if `ExtractVolume' > 0) the sphere.
  If `View' < 0, the plugin is run on the current view.
  Plugin(CutSphere) creates one new view. Numeric options:
  `Xc`
    Default value: `0`
  `Yc`
    Default value: `0`
  `Zc`
    Default value: `0`
  `R`
    Default value: `0.25`
  `ExtractVolume`
    Default value: `0`
  `RecurLevel`
    Default value: `4`
  `TargetError`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(DiscretizationError)`
  Plugin(DiscretizationError) computes the error between the mesh and the geometry. It does so by supersampling the elements and computing the distance between the supersampled points dans their projection on the geometry. Numeric options:
  `SuperSamplingNodes`
    Default value: `10`
`Plugin(Distance)`
  Plugin(Distance) computes distances to physical entities in a mesh.
  Define the physical entities to which the distance is computed. If Point=0, Line=0, and Surface=0, then the distance is computed to all the boundaries of the mesh (edges in 2D and faces in 3D).
  Computation<0. computes the geometrical euclidian distance (warning: different than the geodesic distance), and Computation=a>0.0 solves a PDE on the mesh with the diffusion constant mu = a*bbox, with bbox being the max size of the bounding box of the mesh (see paper Legrand 2006).
  Min Scale and max Scale, scale the distance function. If min Scale<0 and max Scale<0, then no scaling is applied to the distance function.
  Plugin(Distance) creates a new distance view and also saves the view in the fileName.pos file. String options:
  `Filename`
    Default value: `"distance.pos"`
  Numeric options:
  `PhysPoint`
    Default value: `0`
  `PhysLine`
    Default value: `0`
  `PhysSurface`
    Default value: `0`
  `Computation`
    Default value: `-1`
  `MinScale`
    Default value: `-1`
  `MaxScale`
    Default value: `-1`
  `Orthogonal`
    Default value: `-1`
`Plugin(Divergence)`
  Plugin(Divergence) computes the divergence of the field in the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Divergence) creates one new view. Numeric options:
  `View`
    Default value: `-1`
`Plugin(DuplicateBoundaries)`
  Plugin(DuplicateBoundaries) is not documented yet. Numeric options:
  `Dummy`
    Default value: `1`
`Plugin(Eigenvalues)`
  Plugin(Eigenvalues) computes the three real eigenvalues of each tensor in the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Eigenvalues) creates three new scalar views. Numeric options:
  `View`
    Default value: `-1`
`Plugin(Eigenvectors)`
  Plugin(Eigenvectors) computes the three (right) eigenvectors of each tensor in the view `View' and sorts them according to the value of the associated eigenvalues.
  If `ScaleByEigenvalues' is set, each eigenvector is scaled by its associated eigenvalue. The plugin gives an error if the eigenvectors are complex.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Eigenvectors) creates three new vector view. Numeric options:
  `ScaleByEigenvalues`
    Default value: `1`
  `View`
    Default value: `-1`
`Plugin(ExtractEdges)`
  Plugin(ExtractEdges) extracts sharp edges from a triangular mesh.
  Plugin(ExtractEdges) creates one new view. Numeric options:
  `Angle`
    Default value: `40`
  `IncludeBoundary`
    Default value: `1`
`Plugin(ExtractElements)`
  Plugin(ExtractElements) extracts some elements from the view `View'. If `MinVal' != `MaxVal', it extracts the elements whose `TimeStep'-th values (averaged by element) are comprised between `MinVal' and `MaxVal'. If `Visible' != 0, it extracts visible elements.
  If `View' < 0, the plugin is run on the current view.
  Plugin(ExtractElements) creates one new view. Numeric options:
  `MinVal`
    Default value: `0`
  `MaxVal`
    Default value: `0`
  `TimeStep`
    Default value: `0`
  `Visible`
    Default value: `1`
  `Dimension`
    Default value: `-1`
  `View`
    Default value: `-1`
`Plugin(FaultZone)`
  Plugin(FaultZone) convert all the embedded lines of an existing surfacic mesh to flat quadrangles. Flat quadrangles represent joint elements suitable to model a fault zone with Code_Aster.
  `SurfaceTag' must be an existing plane surface containing embedded lines. Embedded lines must have been added to the surface via the command Line In Surface. The surface must be meshed with quadratic incomplete elements.
  `Thickness' is the thichness of the flat quadrangles. Set a value different to zero can be helpfull to check the connectivity.
  `Prefix' is the prefix of the name of physicals containing the new embedded. All physicals containing embedded lines are replaced by physicals containing the coresponding joint elements. String options:
  `Prefix`
    Default value: `"FAMI_"`
  Numeric options:
  `SurfaceTag`
    Default value: `1`
  `Thickness`
    Default value: `0`
`Plugin(FieldFromAmplitudePhase)`
  Plugin(FieldFromAmplitudePhase) builds a complex field 'u' from amplitude 'a' (complex) and phase 'phi' given in two different 'Views' u = a * exp(k*phi), with k the wavenumber.
  The result is to be interpolated in a sufficiently fine mesh: 'MeshFile'.
  Plugin(FieldFromAmplitudePhase) generates one new view. String options:
  `MeshFile`
    Default value: `"fine.msh"`
  Numeric options:
  `Wavenumber`
    Default value: `5`
  `AmplitudeView`
    Default value: `0`
  `PhaseView`
    Default value: `1`
`Plugin(Gradient)`
  Plugin(Gradient) computes the gradient of the field in the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Gradient) creates one new view. Numeric options:
  `View`
    Default value: `-1`
`Plugin(HarmonicToTime)`
  Plugin(HarmonicToTime) takes the values in the time steps `RealPart' and `ImaginaryPart' of the view `View', and creates a new view containing
  `View'[`RealPart'] * cos(p) +- `View'[`ImaginaryPart'] * sin(p)
  with p = 2*Pi*k/`NumSteps', k = 0, ..., `NumSteps'-1.
  The + or - sign is controlled by `TimeSign'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(HarmonicToTime) creates one new view. Numeric options:
  `RealPart`
    Default value: `0`
  `ImaginaryPart`
    Default value: `1`
  `NumSteps`
    Default value: `20`
  `TimeSign`
    Default value: `-1`
  `View`
    Default value: `-1`
`Plugin(HomologyComputation)`
  Plugin(HomologyComputation) computes representative chains of basis elements of (relative) homology and cohomology spaces.
  Define physical groups in order to specify the computation domain and the relative subdomain. Otherwise the whole mesh is the domain and the relative subdomain is empty.
  Plugin(HomologyComputation) creates new views, one for each basis element. The resulting basis chains of desired dimension together with the mesh are saved to the given file. String options:
  `DomainPhysicalGroups`
    Default value: `""`
  `SubdomainPhysicalGroups`
    Default value: `""`
  `ReductionImmunePhysicalGroups`
    Default value: `""`
  `DimensionOfChainsToSave`
    Default value: `"0, 1, 2, 3"`
  `Filename`
    Default value: `"homology.msh"`
  Numeric options:
  `ComputeHomology`
    Default value: `1`
  `ComputeCohomology`
    Default value: `0`
  `HomologyPhysicalGroupsBegin`
    Default value: `-1`
  `CohomologyPhysicalGroupsBegin`
    Default value: `-1`
  `CreatePostProcessingViews`
    Default value: `1`
  `ReductionOmit`
    Default value: `1`
  `ReductionCombine`
    Default value: `3`
  `PostProcessSimplify`
    Default value: `1`
  `ReductionHeuristic`
    Default value: `1`
`Plugin(HomologyPostProcessing)`
  Plugin(HomologyPostProcessing) operates on representative basis chains of homology and cohomology spaces. Functionality:
  1. (co)homology basis transformation:
  'TransformationMatrix': Integer matrix of the transformation.
  'PhysicalGroupsOfOperatedChains': (Co)chains of a (co)homology space basis to be transformed.
  Results a new (co)chain basis that is an integer cobination of the given basis.
  2. Make basis representations of a homology space and a cohomology space compatible:
  'PhysicalGroupsOfOperatedChains': Chains of a homology space basis.
  'PhysicalGroupsOfOperatedChains2': Cochains of a cohomology space basis.
  Results a new basis for the homology space such that the incidence matrix of the new basis and the basis of the cohomology space is the identity matrix.
  Options:
  'PhysicalGroupsToTraceResults': Trace the resulting (co)chains to the given physical groups.
  'PhysicalGroupsToProjectResults': Project the resulting (co)chains to the complement of the given physical groups.
  'NameForResultChains': Post-processing view name prefix for the results.
  'ApplyBoundaryOperatorToResults': Apply boundary operator to the resulting chains.

  String options:

  `TransformationMatrix`
    Default value: `"1, 0; 0, 1"`
  `PhysicalGroupsOfOperatedChains`
    Default value: `"1, 2"`
  `PhysicalGroupsOfOperatedChains2`
    Default value: `""`
  `PhysicalGroupsToTraceResults`
    Default value: `""`
  `PhysicalGroupsToProjectResults`
    Default value: `""`
  `NameForResultChains`
    Default value: `"c"`
  Numeric options:
  `ApplyBoundaryOperatorToResults`
    Default value: `0`
`Plugin(Integrate)`
  Plugin(Integrate) integrates a scalar field over all the elements of the view `View' (if `Dimension' < 0), or over all elements of the prescribed dimension (if `Dimension' > 0). If the field is a vector field,the circulation/flux of the field over line/surface elements is calculated.
  If `View' < 0, the plugin is run on the current view.
  If `OverTime' = i > -1 , the plugin integrates the scalar view over time instead of over space, starting at iteration i.If `Visible' = 1, the plugin only integrates overvisible entities.
  Plugin(Integrate) creates one new view. Numeric options:
  `View`
    Default value: `-1`
  `OverTime`
    Default value: `-1`
  `Dimension`
    Default value: `-1`
  `Visible`
    Default value: `1`
`Plugin(Isosurface)`
  Plugin(Isosurface) extracts the isosurface of value `Value' from the view `View', and draws the `OtherTimeStep'-th step of the view `OtherView' on this isosurface.
  If `ExtractVolume' is nonzero, the plugin extracts the isovolume with values greater (if `ExtractVolume' > 0) or smaller (if `ExtractVolume' < 0) than the isosurface `Value'.
  If `OtherTimeStep' < 0, the plugin uses, for each time step in `View', the corresponding time step in `OtherView'. If `OtherView' < 0, the plugin uses `View' as the value source.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Isosurface) creates as many views as there are time steps in `View'. Numeric options:
  `Value`
    Default value: `0`
  `ExtractVolume`
    Default value: `0`
  `RecurLevel`
    Default value: `4`
  `TargetError`
    Default value: `0`
  `View`
    Default value: `-1`
  `OtherTimeStep`
    Default value: `-1`
  `OtherView`
    Default value: `-1`
`Plugin(Lambda2)`
  Plugin(Lambda2) computes the eigenvalues Lambda(1,2,3) of the tensor (S_ik S_kj + Om_ik Om_kj), where S_ij = 0.5 (ui,j + uj,i) and Om_ij = 0.5 (ui,j - uj,i) are respectively the symmetric and antisymmetric parts of the velocity gradient tensor.
  Vortices are well represented by regions where Lambda(2) is negative.
  If `View' contains tensor elements, the plugin directly uses the tensors as the values of the velocity gradient tensor; if `View' contains vector elements, the plugin uses them as the velocities from which to derive the velocity gradient tensor.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Lambda2) creates one new view. Numeric options:
  `Eigenvalue`
    Default value: `2`
  `View`
    Default value: `-1`
`Plugin(LongitudeLatitude)`
  Plugin(LongituteLatitude) projects the view `View' in longitude-latitude.
  If `View' < 0, the plugin is run on the current view.
  Plugin(LongituteLatitude) is executed in place. Numeric options:
  `View`
    Default value: `-1`
`Plugin(MakeSimplex)`
  Plugin(MakeSimplex) decomposes all non-simplectic elements (quadrangles, prisms, hexahedra, pyramids) in the view `View' into simplices (triangles, tetrahedra).
  If `View' < 0, the plugin is run on the current view.
  Plugin(MakeSimplex) is executed in-place. Numeric options:
  `View`
    Default value: `-1`
`Plugin(MathEval)`
  Plugin(MathEval) creates a new view using data from the time step `TimeStep' in the view `View'.
  If only `Expression0' is given (and `Expression1', ..., `Expression8' are all empty), the plugin creates a scalar view. If `Expression0', `Expression1' and/or `Expression2' are given (and `Expression3', ..., `Expression8' are all empty) the plugin creates a vector view. Otherwise the plugin creates a tensor view.
  In addition to the usual mathematical functions (Exp, Log, Sqrt, Sin, Cos, Fabs, etc.) and operators (+, -, *, /, ^), all expressions can contain:
  - the symbols v0, v1, v2, ..., vn, which represent the n components in `View';
  - the symbols w0, w1, w2, ..., wn, which represent the n components of `OtherView', at time step `OtherTimeStep';
  - the symbols x, y and z, which represent the three spatial coordinates.
  If `TimeStep' < 0, the plugin extracts data from all the time steps in the view.
  If `View' < 0, the plugin is run on the current view.
  Plugin(MathEval) creates one new view.If `PhysicalRegion' < 0, the plugin is run on all physical regions.
  Plugin(MathEval) creates one new view. String options:
  `Expression0`
    Default value: `"Sqrt(v0^2+v1^2+v2^2)"`
  `Expression1`
    Default value: `""`
  `Expression2`
    Default value: `""`
  `Expression3`
    Default value: `""`
  `Expression4`
    Default value: `""`
  `Expression5`
    Default value: `""`
  `Expression6`
    Default value: `""`
  `Expression7`
    Default value: `""`
  `Expression8`
    Default value: `""`
  Numeric options:
  `TimeStep`
    Default value: `-1`
  `View`
    Default value: `-1`
  `OtherTimeStep`
    Default value: `-1`
  `OtherView`
    Default value: `-1`
  `ForceInterpolation`
    Default value: `0`
  `PhysicalRegion`
    Default value: `-1`
`Plugin(MeshSubEntities)`
  Plugin(MeshSubEntities) creates mesh elements for the entities of dimension `OutputDimension' (0 for vertices, 1 for edges, 2 for faces) of the `InputPhysicalGroup' of dimension `InputDimension'. The plugin creates new elements belonging to `OutputPhysicalGroup'. Numeric options:
  `InputDimension`
    Default value: `1`
  `InputPhysicalGroup`
    Default value: `1`
  `OuputDimension`
    Default value: `0`
  `OuputPhysicalGroup`
    Default value: `2000`
`Plugin(MinMax)`
  Plugin(MinMax) computes the min/max of a view.
  If `View' < 0, the plugin is run on the current view. If `OverTime' = 1, the plugin calculates the min/max over space and time. If `Argument' = 1, the plugin calculates the min/max and the argmin/argmax. If `Visible' = 1, the plugin is only applied to visible entities.
  Plugin(MinMax) creates two new views. Numeric options:
  `View`
    Default value: `-1`
  `OverTime`
    Default value: `0`
  `Argument`
    Default value: `0`
  `Visible`
    Default value: `1`
`Plugin(ModifyComponent)`
  Plugin(ModifyComponent) sets the `Component'-th component of the `TimeStep'-th time step in the view `View' to the expression `Expression'.
  `Expression' can contain:
  - the usual mathematical functions (Log, Sqrt, Sin, Cos, Fabs, ...) and operators (+, -, *, /, ^);
  - the symbols x, y and z, to retrieve the coordinates of the current node;
  - the symbols Time and TimeStep, to retrieve the current time and time step values;
  - the symbol v, to retrieve the `Component'-th component of the field in `View' at the `TimeStep'-th time step;
  - the symbols v0, v1, v2, ..., v8, to retrieve each component of the field in `View' at the `TimeStep'-th time step;
  - the symbol w, to retrieve the `Component'-th component of the field in `OtherView' at the `OtherTimeStep'-th time step. If `OtherView' and `View' are based on different spatial grids, or if their data types are different, `OtherView' is interpolated onto `View';
  - the symbols w0, w1, w2, ..., w8, to retrieve each component of the field in `OtherView' at the `OtherTimeStep'-th time step.
  If `TimeStep' < 0, the plugin automatically loops over all the time steps in `View' and evaluates `Expression' for each one.
  If `OtherTimeStep' < 0, the plugin uses `TimeStep' instead.
  If `Component' < 0, the plugin automatically ops
  over all the components in the view and evaluates `Expression' for each one.
  If `View' < 0, the plugin is run on the current view.
  If `OtherView' < 0, the plugin uses `View' instead.
  Plugin(ModifyComponent) is executed in-place. String options:
  `Expression`
    Default value: `"v0 * Sin(x)"`
  Numeric options:
  `Component`
    Default value: `-1`
  `TimeStep`
    Default value: `-1`
  `View`
    Default value: `-1`
  `OtherTimeStep`
    Default value: `-1`
  `OtherView`
    Default value: `-1`
  `ForceInterpolation`
    Default value: `0`
`Plugin(ModulusPhase)`
  Plugin(ModulusPhase) interprets the time steps `realPart' and `imaginaryPart' in the view `View' as the real and imaginary parts of a complex field and replaces them with their corresponding modulus and phase.
  If `View' < 0, the plugin is run on the current view.
  Plugin(ModulusPhase) is executed in-place. Numeric options:
  `RealPart`
    Default value: `0`
  `ImaginaryPart`
    Default value: `1`
  `View`
    Default value: `-1`
`Plugin(NearToFarField)`
  Plugin(NearToFarField) computes the far field pattern from the near electric E and magnetic H fields on a surface enclosing the radiating device (antenna).
  Parameters: the wavenumber, the angular discretisation (phi in [0, 2*Pi] and theta in [0, Pi]) of the far field sphere and the indices of the views containing the complex-valued E and H fields. If `Normalize' is set, the far field is normalized to 1. If `dB' is set, the far field is computed in dB. If `NegativeTime' is set, E and H are assumed to have exp(-iwt) time dependency; otherwise they are assume to have exp(+iwt) time dependency. If `MatlabOutputFile' is given the raw far field data is also exported in Matlab format.
  Plugin(NearToFarField) creates one new view. String options:
  `MatlabOutputFile`
    Default value: `"farfield.m"`
  Numeric options:
  `Wavenumber`
    Default value: `1`
  `PhiStart`
    Default value: `0`
  `PhiEnd`
    Default value: `6.28319`
  `NumPointsPhi`
    Default value: `60`
  `ThetaStart`
    Default value: `0`
  `ThetaEnd`
    Default value: `3.14159`
  `NumPointsTheta`
    Default value: `30`
  `EView`
    Default value: `0`
  `HView`
    Default value: `1`
  `Normalize`
    Default value: `1`
  `dB`
    Default value: `1`
  `NegativeTime`
    Default value: `0`
  `RFar`
    Default value: `0`
`Plugin(NearestNeighbor)`
  Plugin(NearestNeighbor) computes the distance from each point in `View' to its nearest neighbor.
  If `View' < 0, the plugin is run on the current view.
  Plugin(NearestNeighbor) is executed in-place. Numeric options:
  `View`
    Default value: `-1`
`Plugin(NewView)`
  Plugin(NewView) creates a new view from a mesh. Numeric options:
  `View`
    Default value: `-1`
`Plugin(Particles)`
  Plugin(Particles) computes the trajectory of particules in the force field given by the `TimeStep'-th time step of a vector view `View'.
  The plugin takes as input a grid defined by the 3 points (`X0',`Y0',`Z0') (origin), (`X1',`Y1',`Z1') (axis of U) and (`X2',`Y2',`Z2') (axis of V).
  The number of particles along U and V that are to be transported is set with the options `NumPointsU' and `NumPointsV'. The equation
  A2 * d^2X(t)/dt^2 + A1 * dX(t)/dt + A0 * X(t) = F
  is then solved with the initial conditions X(t=0) chosen as the grid, dX/dt(t=0)=0, and with F interpolated from the vector view.
  Time stepping is done using a Newmark scheme with step size `DT' and `MaxIter' maximum number of iterations.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Particles) creates one new view containing multi-step vector points. Numeric options:
  `X0`
    Default value: `0`
  `Y0`
    Default value: `0`
  `Z0`
    Default value: `0`
  `X1`
    Default value: `1`
  `Y1`
    Default value: `0`
  `Z1`
    Default value: `0`
  `X2`
    Default value: `0`
  `Y2`
    Default value: `1`
  `Z2`
    Default value: `0`
  `NumPointsU`
    Default value: `10`
  `NumPointsV`
    Default value: `1`
  `A2`
    Default value: `1`
  `A1`
    Default value: `0`
  `A0`
    Default value: `0`
  `DT`
    Default value: `0.1`
  `MaxIter`
    Default value: `100`
  `TimeStep`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(Probe)`
  Plugin(Probe) gets the value of the view `View' at the point (`X',`Y',`Z').
  If `View' < 0, the plugin is run on the current view.
  Plugin(Probe) creates one new view. Numeric options:
  `X`
    Default value: `0`
  `Y`
    Default value: `0`
  `Z`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(Remove)`
  Plugin(Remove) removes the marked items from the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Remove) is executed in-place. Numeric options:
  `Text2D`
    Default value: `1`
  `Text3D`
    Default value: `1`
  `Points`
    Default value: `0`
  `Lines`
    Default value: `0`
  `Triangles`
    Default value: `0`
  `Quadrangles`
    Default value: `0`
  `Tetrahedra`
    Default value: `0`
  `Hexahedra`
    Default value: `0`
  `Prisms`
    Default value: `0`
  `Pyramids`
    Default value: `0`
  `Scalar`
    Default value: `1`
  `Vector`
    Default value: `1`
  `Tensor`
    Default value: `1`
  `View`
    Default value: `-1`
`Plugin(Scal2Tens)`
  Plugin(Scal2Tens) converts some scalar fields into a tensor field. The number of components must be given (max. 9). The new view 'NameNewView' contains the new tensor field. If the number of a view is -1, the value of the corresponding component is 0. String options:
  `NameNewView`
    Default value: `"NewView"`
  Numeric options:
  `NumberOfComponents`
    Default value: `9`
  `View0`
    Default value: `-1`
  `View1`
    Default value: `-1`
  `View2`
    Default value: `-1`
  `View3`
    Default value: `-1`
  `View4`
    Default value: `-1`
  `View5`
    Default value: `-1`
  `View6`
    Default value: `-1`
  `View7`
    Default value: `-1`
  `View8`
    Default value: `-1`
`Plugin(Scal2Vec)`
  Plugin(Scal2Vec) converts the scalar fields into a vectorial field. The new view 'NameNewView' contains it. If the number of a view is -1, the value of the corresponding component of the vector field is 0. String options:
  `NameNewView`
    Default value: `"NewView"`
  Numeric options:
  `ViewX`
    Default value: `-1`
  `ViewY`
    Default value: `-1`
  `ViewZ`
    Default value: `-1`
`Plugin(SimplePartition)`
  Plugin(SimplePartition) partitions the current mesh into `NumSlices' slices, along the X-, Y- or Z-axis depending on the value of `Direction' (0,1,2). The plugin creates partition boundaries if `CreateBoundaries' is set. String options:
  `Mapping`
    Default value: `"t"`
  Numeric options:
  `NumSlices`
    Default value: `4`
  `Direction`
    Default value: `0`
  `CreateBoundaries`
    Default value: `1`
`Plugin(Skin)`
  Plugin(Skin) extracts the boundary (skin) of the current mesh (if `FromMesh' = 1), or from the the view `View' (in which case it creates a new view). If `View' < 0 and `FromMesh' = 0, the plugin is run on the current view.
  If `Visible' is set, the plugin only extracts the skin of visible entities. Numeric options:
  `Visible`
    Default value: `1`
  `FromMesh`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(Smooth)`
  Plugin(Smooth) averages the values at the nodes of the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Smooth) is executed in-place. Numeric options:
  `View`
    Default value: `-1`
`Plugin(SphericalRaise)`
  Plugin(SphericalRaise) transforms the coordinates of the elements in the view `View' using the values associated with the `TimeStep'-th time step.
  Instead of elevating the nodes along the X, Y and Z axes as with the View[`View'].RaiseX, View[`View'].RaiseY and View[`View'].RaiseZ options, the raise is applied along the radius of a sphere centered at (`Xc', `Yc', `Zc').
  To produce a standard radiation pattern, set `Offset' to minus the radius of the sphere the original data lives on.
  If `View' < 0, the plugin is run on the current view.
  Plugin(SphericalRaise) is executed in-place. Numeric options:
  `Xc`
    Default value: `0`
  `Yc`
    Default value: `0`
  `Zc`
    Default value: `0`
  `Raise`
    Default value: `1`
  `Offset`
    Default value: `0`
  `TimeStep`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(StreamLines)`
  Plugin(StreamLines) computes stream lines from the `TimeStep'-th time step of a vector view `View' and optionally interpolates the scalar view `OtherView' on the resulting stream lines.
  The plugin takes as input a grid defined by the 3 points (`X0',`Y0',`Z0') (origin), (`X1',`Y1',`Z1') (axis of U) and (`X2',`Y2',`Z2') (axis of V).
  The number of points along U and V that are to be transported is set with the options `NumPointsU' and `NumPointsV'. The equation
  dX(t)/dt = V(x,y,z)
  is then solved with the initial condition X(t=0) chosen as the grid and with V(x,y,z) interpolated on the vector view.
  The time stepping scheme is a RK44 with step size `DT' and `MaxIter' maximum number of iterations.
  If `TimeStep' < 0, the plugin tries to compute streamlines of the unsteady flow.
  If `View' < 0, the plugin is run on the current view.
  Plugin(StreamLines) creates one new view. This view contains multi-step vector points if `OtherView' < 0, or single-step scalar lines if `OtherView' >= 0. Numeric options:
  `X0`
    Default value: `0`
  `Y0`
    Default value: `0`
  `Z0`
    Default value: `0`
  `X1`
    Default value: `1`
  `Y1`
    Default value: `0`
  `Z1`
    Default value: `0`
  `X2`
    Default value: `0`
  `Y2`
    Default value: `1`
  `Z2`
    Default value: `0`
  `NumPointsU`
    Default value: `10`
  `NumPointsV`
    Default value: `1`
  `DT`
    Default value: `0.1`
  `MaxIter`
    Default value: `100`
  `TimeStep`
    Default value: `0`
  `View`
    Default value: `-1`
  `OtherView`
    Default value: `-1`
`Plugin(Tetrahedralize)`
  Plugin(Tetrahedralize) tetrahedralizes the points in the view `View'.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Tetrahedralize) creates one new view. Numeric options:
  `View`
    Default value: `-1`
`Plugin(Transform)`
  Plugin(Transform) transforms the homogeneous node coordinates (x,y,z,1) of the elements in the view `View' by the matrix
  [`A11' `A12' `A13' `Tx']
  [`A21' `A22' `A23' `Ty']
  [`A31' `A32' `A33' `Tz'].
  If `SwapOrientation' is set, the orientation of the elements is reversed.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Transform) is executed in-place. Numeric options:
  `A11`
    Default value: `1`
  `A12`
    Default value: `0`
  `A13`
    Default value: `0`
  `A21`
    Default value: `0`
  `A22`
    Default value: `1`
  `A23`
    Default value: `0`
  `A31`
    Default value: `0`
  `A32`
    Default value: `0`
  `A33`
    Default value: `1`
  `Tx`
    Default value: `0`
  `Ty`
    Default value: `0`
  `Tz`
    Default value: `0`
  `SwapOrientation`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(Triangulate)`
  Plugin(Triangulate) triangulates the points in the view `View', assuming that all the points belong to a surface that can be projected one-to-one onto a plane. Algorithm selects the old (0) or new (1) meshing algorithm.
  If `View' < 0, the plugin is run on the current view.
  Plugin(Triangulate) creates one new view. Numeric options:
  `Algorithm`
    Default value: `0`
  `View`
    Default value: `-1`
`Plugin(Warp)`
  Plugin(Warp) transforms the elements in the view `View' by adding to their node coordinates the vector field stored in the `TimeStep'-th time step of the view `OtherView', scaled by `Factor'.
  If `View' < 0, the plugin is run on the current view.
  If `OtherView' < 0, the vector field is taken as the field of surface normals multiplied by the `TimeStep' value in `View'. (The smoothing of the surface normals is controlled by the `SmoothingAngle' parameter.)
  Plugin(Warp) is executed in-place. Numeric options:
  `Factor`
    Default value: `1`
  `TimeStep`
    Default value: `0`
  `SmoothingAngle`
    Default value: `180`
  `View`
    Default value: `-1`
  `OtherView`
    Default value: `-1`

Previous: Post-processing plugins, Up: Post-processing module

### 8.3 Post-processing options

General post-processing option names have the form ``PostProcessing.`string'. Options peculiar to post-processing views take two forms.

1. options that should apply to all views can be set through ``View.`string', before any view is loaded;
2. options that should apply only to the n-th view take the form ``View[`n`].`string' (n = 0, 1, 2, ...), after the n-th view is loaded.

The list of all post-processing and view options is given in Post-processing options list. See t8.geo, and t9.geo, for some examples.

Next: Tutorial, Previous: Post-processing module, Up: Top

## 9 File formats

This chapter describes Gmsh's native “MSH” file format, used to store meshes and associated post-processing datasets. The MSH format exists in two flavors: ASCII and binary. The format has a version number (currently: 2.2) that is independent of Gmsh's main version number.

(Remember that for small post-processing datasets you can also use human-readable “parsed” post-processing views, as described in Post-processing commands. Such “parsed” views do not require an underlying mesh, and can therefore be easier to use in some cases.)

Next: MSH binary file format, Previous: File formats, Up: File formats

### 9.1 MSH ASCII file format

The MSH ASCII file format contains one mandatory section giving information about the file (`$MeshFormat`), followed by several optional sections defining the nodes (`$Nodes`), elements (`$Elements`), region names (`$PhysicalName`), periodicity relations (`$Periodic`) and post-processing datasets (`$NodeData`, `$ElementData`, `$ElementNodeData`).

When `$Elements` are given, `$Nodes` should also be provided, before the `$Elements` section. Currently only one `$Nodes` and one `$Elements` section are allowed per file. (This might/will change in the future.)

Important note about efficiency. Node and element tags can be "sparse", i.e., do not have to constitute a continuous list of indexes starting at 1. However, using non-continuous tags will lead to performance degradation. For meshes, non-continuous indexing forces Gmsh to use a map instead of a vector to access nodes and elements. The performance hit is on speed. For post-processing datasets, which always use vectors to access data, the performance hit is on memory. A `NodeData` with two nodes, tagged 1 and 1000000, will allocate a (mostly empty) vector of 1000000 elements.

Any section with an unrecognized header is simply ignored: you can thus add comments in a `.msh` file by putting them e.g. inside a `$Comments`/`$EndComments` section.

Sections can be repeated in the same file, and post-processing sections can be put into separate files (e.g. one file per time step). Nodes are assumed to be defined before elements.

The format is defined as follows:

         $MeshFormat
         version-number file-type data-size
         $EndMeshFormat
         $PhysicalNames
         number-of-names
         physical-dimension physical-number "physical-name"
         ...
         $EndPhysicalNames
         $Nodes
         number-of-nodes
         node-number x-coord y-coord z-coord
         ...
         $EndNodes
         $Elements
         number-of-elements
         elm-number elm-type number-of-tags < tag > ... node-number-list
         ...
         $EndElements
         $Periodic
         number-of-periodic-entities
         dimension slave-entity-tag master-entity-tag
         number-of-nodes
         slave-node-number master-node-number
         ...
         $EndPeriodic
         $NodeData
         number-of-string-tags
         < "string-tag" >
         ...
         number-of-real-tags
         < real-tag >
         ...
         number-of-integer-tags
         < integer-tag >
         ...
         node-number value ...
         ...
         $EndNodeData
         $ElementData
         number-of-string-tags
         < "string-tag" >
         ...
         number-of-real-tags
         < real-tag >
         ...
         number-of-integer-tags
         < integer-tag >
         ...
         elm-number value ...
         ...
         $EndElementData
         $ElementNodeData
         number-of-string-tags
         < "string-tag" >
         ...
         number-of-real-tags
         < real-tag >
         ...
         number-of-integer-tags
         < integer-tag >
         ...
         elm-number number-of-nodes-per-element value ...
         ...
         $EndElementNodeData
         $InterpolationScheme
         "name"
         number-of-element-topologies
         elm-topology
         number-of-interpolation-matrices
         num-rows num-columns value ...
         ...
         $EndInterpolationScheme

where

version-number
  is a real number equal to 2.2
file-type
  is an integer equal to 0 in the ASCII file format.
data-size
  is an integer equal to the size of the floating point numbers used in the file (currently only data-size = sizeof(double) is supported).
number-of-nodes
  is the number of nodes in the mesh.
node-number
  is the number (index) of the n-th node in the mesh; node-number must be a postive (non-zero) integer. Note that the node-numbers do not necessarily have to form a dense nor an ordered sequence.
x-coord y-coord z-coord
  are the floating point values giving the X, Y and Z coordinates of the n-th node.
number-of-elements
  is the number of elements in the mesh.
elm-number
  is the number (index) of the n-th element in the mesh; elm-number must be a postive (non-zero) integer. Note that the elm-numbers do not necessarily have to form a dense nor an ordered sequence.
elm-type
  defines the geometrical type of the n-th element:
  `1`
    2-node line.
  `2`
    3-node triangle.
  `3`
    4-node quadrangle.
  `4`
    4-node tetrahedron.
  `5`
    8-node hexahedron.
  `6`
    6-node prism.
  `7`
    5-node pyramid.
  `8`
    3-node second order line (2 nodes associated with the vertices and 1 with the edge).
  `9`
    6-node second order triangle (3 nodes associated with the vertices and 3 with the edges).
  `10`
    9-node second order quadrangle (4 nodes associated with the vertices, 4 with the edges and 1 with the face).
  `11`
    10-node second order tetrahedron (4 nodes associated with the vertices and 6 with the edges).
  `12`
    27-node second order hexahedron (8 nodes associated with the vertices, 12 with the edges, 6 with the faces and 1 with the volume).
  `13`
    18-node second order prism (6 nodes associated with the vertices, 9 with the edges and 3 with the quadrangular faces).
  `14`
    14-node second order pyramid (5 nodes associated with the vertices, 8 with the edges and 1 with the quadrangular face).
  `15`
    1-node point.
  `16`
    8-node second order quadrangle (4 nodes associated with the vertices and 4 with the edges).
  `17`
    20-node second order hexahedron (8 nodes associated with the vertices and 12 with the edges).
  `18`
    15-node second order prism (6 nodes associated with the vertices and 9 with the edges).
  `19`
    13-node second order pyramid (5 nodes associated with the vertices and 8 with the edges).
  `20`
    9-node third order incomplete triangle (3 nodes associated with the vertices, 6 with the edges)
  `21`
    10-node third order triangle (3 nodes associated with the vertices, 6 with the edges, 1 with the face)
  `22`
    12-node fourth order incomplete triangle (3 nodes associated with the vertices, 9 with the edges)
  `23`
    15-node fourth order triangle (3 nodes associated with the vertices, 9 with the edges, 3 with the face)
  `24`
    15-node fifth order incomplete triangle (3 nodes associated with the vertices, 12 with the edges)
  `25`
    21-node fifth order complete triangle (3 nodes associated with the vertices, 12 with the edges, 6 with the face)
  `26`
    4-node third order edge (2 nodes associated with the vertices, 2 internal to the edge)
  `27`
    5-node fourth order edge (2 nodes associated with the vertices, 3 internal to the edge)
  `28`
    6-node fifth order edge (2 nodes associated with the vertices, 4 internal to the edge)
  `29`
    20-node third order tetrahedron (4 nodes associated with the vertices, 12 with the edges, 4 with the faces)
  `30`
    35-node fourth order tetrahedron (4 nodes associated with the vertices, 18 with the edges, 12 with the faces, 1 in the volume)
  `31`
    56-node fifth order tetrahedron (4 nodes associated with the vertices, 24 with the edges, 24 with the faces, 4 in the volume)
  `92`
    64-node third order hexahedron (8 nodes associated with the vertices, 24 with the edges, 24 with the faces, 8 in the volume)
  `93`
    125-node fourth order hexahedron (8 nodes associated with the vertices, 36 with the edges, 54 with the faces, 27 in the volume)
  See below for the ordering of the nodes.
number-of-tags
  gives the number of integer tags that follow for the n-th element. By default, the first tag is the number of the physical entity to which the element belongs; the second is the number of the elementary geometrical entity to which the element belongs; the third is the number of mesh partitions to which the element belongs, followed by the partition ids (negative partition ids indicate ghost cells). A zero tag is equivalent to no tag. Gmsh and most codes using the MSH 2 format require at least the first two tags (physical and elementary tags).
node-number-list
  is the list of the node numbers of the n-th element. The ordering of the nodes is given in Node ordering.
number-of-string-tags
  gives the number of string tags that follow. By default the first string-tag is interpreted as the name of the post-processing view and the second as the name of the interpolation scheme. The interpolation scheme is provided in the `$InterpolationScheme` section (see below).
number-of-real-tags
  gives the number of real number tags that follow. By default the first real-tag is interpreted as a time value associated with the dataset.
number-of-integer-tags
  gives the number of integer tags that follow. By default the first integer-tag is interpreted as a time step index (starting at 0), the second as the number of field components of the data in the view (1, 3 or 9), the third as the number of entities (nodes or elements) in the view, and the fourth as the partition index for the view data (0 for no partition).
number-of-nodes-per-elements
  gives the number of node values for an element in an element-based view.
value
  is a real number giving the value associated with a node or an element. For `NodeData` (respectively `ElementData`) views, there are ncomp values per node (resp. per element), where ncomp is the number of field components. For `ElementNodeData` views, there are ncomp times number-of-nodes-per-elements values per element.
number-of-element-topologies
  is the number of element topologies for which interpolation matrices are provided
elm-topology
  is the id tag of a given element topology: 1 for points, 2 for lines, 3 for triangles, 4 for quadrangles, 5 for tetrahedra, 6 for pyramids, 7 for prisms, 8 for hexahedra, 9 for polygons and 10 for polyhedra.
number-of-interpolation-matrices
  is the number of interpolation matrices provided for this element topology. Currently you should provide 2 matrices, i.e., the matrices that specify how to interpolate the data (they have the same meaning as in Post-processing commands). The matrices are specified by 2 integers (num-rows and num-columns) followed by the values.

Below is a small example (a mesh consisting of two quadrangles with an associated nodal scalar dataset; the comments are not part of the actual file!):

         $MeshFormat
         2.2 0 8
         $EndMeshFormat
         $Nodes
         6                      six mesh nodes:
         1 0.0 0.0 0.0            node #1: coordinates (0.0, 0.0, 0.0)
         2 1.0 0.0 0.0            node #2: coordinates (1.0, 0.0, 0.0)
         3 1.0 1.0 0.0            etc.
         4 0.0 1.0 0.0
         5 2.0 0.0 0.0
         6 2.0 1.0 0.0
         $EndNodes
         $Elements
         2                      two elements:
         1 3 2 99 2 1 2 3 4       quad #1: type 3, physical 99, elementary 2, nodes 1 2 3 4
         2 3 2 99 2 2 5 6 3       quad #2: type 3, physical 99, elementary 2, nodes 2 5 6 3
         $EndElements
         $NodeData
         1                      one string tag:
         "A scalar view"          the name of the view ("A scalar view")
         1                      one real tag:
         0.0                      the time value (0.0)
         3                      three integer tags:
         0                        the time step (0; time steps always start at 0)
         1                        1-component (scalar) field
         6                        six associated nodal values
         1 0.0                  value associated with node #1 (0.0)
         2 0.1                  value associated with node #2 (0.1)
         3 0.2                  etc.
         4 0.0
         5 0.2
         6 0.4
         $EndNodeData

Next: Node ordering, Previous: MSH ASCII file format, Up: File formats

### 9.2 MSH binary file format

The binary file format is similar to the ASCII format described above:

         $MeshFormat
         version-number file-type data-size
         one-binary
         $EndMeshFormat
         $Nodes
         number-of-nodes
         nodes-binary
         $EndNodes
         $Elements
         number-of-elements
         element-header-binary
         elements-binary
         element-header-binary
         elements-binary
         ...
         $EndElements

         [ All other sections are identical to ASCII, except that node-number,
           elm-number, number-of-nodes-per-element and values are written in
           binary format. Beware that all the $End tags must start on a new line. ]

where

version-number
  is a real number equal to 2.2.
file-type
  is an integer equal to 1.
data-size
  has the same meaning as in the ASCII file format. Currently only data-size = sizeof(double) is supported.
one-binary
  is an integer of value 1 written in binary form. This integer is used for detecting if the computer on which the binary file was written and the computer on which the file is read are of the same type (little or big endian).

  Here is a pseudo C code to write one-binary:

                int one = 1;
                fwrite(&one, sizeof(int), 1, file);

number-of-nodes
  has the same meaning as in the ASCII file format.
nodes-binary
  is the list of nodes in binary form, i.e., a array of number-of-nodes * (4 + 3 * data-size) bytes. For each node, the first 4 bytes contain the node number and the next (3 * data-size) bytes contain the three floating point coordinates.

  Here is a pseudo C code to write nodes-binary:

                for(i = 0; i < number_of_nodes; i++){
                  fwrite(&num_i, sizeof(int), 1, file);
                  double xyz[3] = {node_i_x, node_i_y, node_i_z};
                  fwrite(xyz, sizeof(double), 3, file);
                }

number-of-elements
  has the same meaning as in the ASCII file format.
element-header-binary
  is a list of 3 integers in binary form, i.e., an array of (3 * 4) bytes: the first four bytes contain the type of the elements that follow (same as elm-type in the ASCII format), the next four contain the number of elements that follow, and the last four contain the number of tags per element (same as number-of-tags in the ASCII format).

  Here is a pseudo C code to write element-header-binary:

                int header[3] = {elm_type, num_elm_follow, num_tags};
                fwrite(header, sizeof(int), 3, file);

elements-binary
  is a list of elements in binary form, i.e., an array of “number of elements that follow” * (4 + number-of-tags * 4 + #node-number-list * 4) bytes. For each element, the first four bytes contain the element number, the next (number-of-tags * 4) contain the tags, and the last (#node-number-list * 4) contain the node indices.

  Here is a pseudo C code to write elements-binary for triangles with the 2 standard tags (the physical and elementary regions):

                for(i = 0; i < number_of_triangles; i++){
                  int data[6] = {num_i, physical, elementary,
                                 node_i_1, node_i_2, node_i_3};
                  fwrite(data, sizeof(int), 6, file);
                }

Next: Legacy formats, Previous: MSH binary file format, Up: File formats

### 9.3 Node ordering

Historically, Gmsh developers have started by implementing linear elements (lines, triangles, quads, tets, prisms and hexes). Then, second and sometimes third order elements have been hardcoded. We here distinguish “low order elements” that have been hardcoded initially and “high order elements” that have been coded in a general fashion, theoretically valid for any order.

#### 9.3.1 Low order elements

For all mesh and post-processing file formats, the reference elements are defined as follows.

         Line:                   Line3:           Line4:

         0----------1 --> u      0-----2----1     0----2----3----1

         Triangle:               Triangle6:          Triangle9/10:          Triangle12/15:

         v
         ^                                                                   2
         |                                                                   | \
         2                       2                    2                      9   8
         |`\                     |`\                  | \                    |     \
         |  `\                   |  `\                7   6                 10 (14)  7
         |    `\                 5    `4              |     \                |         \
         |      `\               |      `\            8  (9)  5             11 (12) (13) 6
         |        `\             |        `\          |         \            |             \
         0----------1 --> u      0-----3----1         0---3---4---1          0---3---4---5---1

         Quadrangle:            Quadrangle8:            Quadrangle9:

               v
               ^
               |
         3-----------2          3-----6-----2           3-----6-----2
         |     |     |          |           |           |           |
         |     |     |          |           |           |           |
         |     +---- | --> u    7           5           7     8     5
         |           |          |           |           |           |
         |           |          |           |           |           |
         0-----------1          0-----4-----1           0-----4-----1

         Tetrahedron:                          Tetrahedron10:

                            v
                          .
                        ,/
                       /
                    2                                     2
                  ,/|`\                                 ,/|`\
                ,/  |  `\                             ,/  |  `\
              ,/    '.   `\                         ,6    '.   `5
            ,/       |     `\                     ,/       8     `\
          ,/         |       `\                 ,/         |       `\
         0-----------'.--------1 --> u         0--------4--'.--------1
          `\.         |      ,/                 `\.         |      ,/
             `\.      |    ,/                      `\.      |    ,9
                `\.   '. ,/                           `7.   '. ,/
                   `\. |/                                `\. |/
                      `3                                    `3
                         `\.
                            ` w

         Hexahedron:             Hexahedron20:          Hexahedron27:

                v
         3----------2            3----13----2           3----13----2
         |\     ^   |\           |\         |\          |\         |\
         | \    |   | \          | 15       | 14        |15    24  | 14
         |  \   |   |  \         9  \       11 \        9  \ 20    11 \
         |   7------+---6        |   7----19+---6       |   7----19+---6
         |   |  +-- |-- | -> u   |   |      |   |       |22 |  26  | 23|
         0---+---\--1   |        0---+-8----1   |       0---+-8----1   |
          \  |    \  \  |         \  17      \  18       \ 17    25 \  18
           \ |     \  \ |         10 |        12|        10 |  21    12|
            \|      w  \|           \|         \|          \|         \|
             4----------5            4----16----5           4----16----5

         Prism:                      Prism15:               Prism18:

                    w
                    ^
                    |
                    3                       3                      3
                  ,/|`\                   ,/|`\                  ,/|`\
                ,/  |  `\               12  |  13              12  |  13
              ,/    |    `\           ,/    |    `\          ,/    |    `\
             4------+------5         4------14-----5        4------14-----5
             |      |      |         |      8      |        |      8      |
             |    ,/|`\    |         |      |      |        |    ,/|`\    |
             |  ,/  |  `\  |         |      |      |        |  15  |  16  |
             |,/    |    `\|         |      |      |        |,/    |    `\|
            ,|      |      |\        10     |      11       10-----17-----11
          ,/ |      0      | `\      |      0      |        |      0      |
         u   |    ,/ `\    |    v    |    ,/ `\    |        |    ,/ `\    |
             |  ,/     `\  |         |  ,6     `7  |        |  ,6     `7  |
             |,/         `\|         |,/         `\|        |,/         `\|
             1-------------2         1------9------2        1------9------2

         Pyramid:                     Pyramid13:                   Pyramid14:

                        4                            4                            4
                      ,/|\                         ,/|\                         ,/|\
                    ,/ .'|\                      ,/ .'|\                      ,/ .'|\
                  ,/   | | \                   ,/   | | \                   ,/   | | \
                ,/    .' | `.                ,/    .' | `.                ,/    .' | `.
              ,/      |  '.  \             ,7      |  12  \             ,7      |  12  \
            ,/       .' w |   \          ,/       .'   |   \          ,/       .'   |   \
          ,/         |  ^ |    \       ,/         9    |    11      ,/         9    |    11
         0----------.'--|-3    `.     0--------6-.'----3    `.     0--------6-.'----3    `.
          `\        |   |  `\    \      `\        |      `\    \     `\        |      `\    \
            `\     .'   +----`\ - \ -> v  `5     .'        10   \      `5     .' 13     10   \
              `\   |    `\     `\  \        `\   |           `\  \       `\   |           `\  \
                `\.'      `\     `\`          `\.'             `\`         `\.'             `\`
                   1----------------2            1--------8-------2           1--------8-------2
                             `\
                                u

#### 9.3.2 High order elements

The node ordering of a higher order (possibly curved) element is compatible with the numbering of low order element (it is a generalization). We number nodes in the following order:

- the element principal or corner vertices;
- the internal nodes for each edge;
- the internal nodes for each face;
- the volume internal nodes.

The numbering for internal nodes is recursive, ie. the numbering follows that of the nodes of an embedded edge/face/volume of lower order. The higher order nodes are assumed to be equispaced. Edges and faces are numbered following the lowest order template that generates a single high-order on this edge/face. Furthermore, an edge is oriented from the vertex with the lowest to the highest index. The orientation of a face is such that the computed normal points outward; the starting point is the vertex with the lowest index.

Previous: Node ordering, Up: File formats

### 9.4 Legacy formats

This section describes Gmsh's older native file formats. Future versions of Gmsh will continue to support these formats, but we recommend that you do not use them in new applications.

Next: POS ASCII file format, Previous: Legacy formats, Up: Legacy formats

#### 9.4.1 MSH file format version 1.0 (Legacy)

The MSH file format version 1.0 is Gmsh's old native mesh file format, now superseded by the format described in MSH ASCII file format. It is defined as follows:

         $NOD
         number-of-nodes
         node-number x-coord y-coord z-coord
         ...
         $ENDNOD
         $ELM
         number-of-elements
         elm-number elm-type reg-phys reg-elem number-of-nodes node-number-list
         ...
         $ENDELM

where

number-of-nodes
  is the number of nodes in the mesh.
node-number
  is the number (index) of the n-th node in the mesh; node-number must be a postive (non-zero) integer. Note that the node-numbers do not necessarily have to form a dense nor an ordered sequence.
x-coord y-coord z-coord
  are the floating point values giving the X, Y and Z coordinates of the n-th node.
number-of-elements
  is the number of elements in the mesh.
elm-number
  is the number (index) of the n-th element in the mesh; elm-number must be a postive (non-zero) integer. Note that the elm-numbers do not necessarily have to form a dense nor an ordered sequence.
elm-type
  defines the geometrical type of the n-th element:
  `1`
    2-node line.
  `2`
    3-node triangle.
  `3`
    4-node quadrangle.
  `4`
    4-node tetrahedron.
  `5`
    8-node hexahedron.
  `6`
    6-node prism.
  `7`
    5-node pyramid.
  `8`
    3-node second order line (2 nodes associated with the vertices and 1 with the edge).
  `9`
    6-node second order triangle (3 nodes associated with the vertices and 3 with the edges).
  `10`
    9-node second order quadrangle (4 nodes associated with the vertices, 4 with the edges and 1 with the face).
  `11`
    10-node second order tetrahedron (4 nodes associated with the vertices and 6 with the edges).
  `12`
    27-node second order hexahedron (8 nodes associated with the vertices, 12 with the edges, 6 with the faces and 1 with the volume).
  `13`
    18-node second order prism (6 nodes associated with the vertices, 9 with the edges and 3 with the quadrangular faces).
  `14`
    14-node second order pyramid (5 nodes associated with the vertices, 8 with the edges and 1 with the quadrangular face).
  `15`
    1-node point.
  `16`
    8-node second order quadrangle (4 nodes associated with the vertices and 4 with the edges).
  `17`
    20-node second order hexahedron (8 nodes associated with the vertices and 12 with the edges).
  `18`
    15-node second order prism (6 nodes associated with the vertices and 9 with the edges).
  `19`
    13-node second order pyramid (5 nodes associated with the vertices and 8 with the edges).
  See below for the ordering of the nodes.
reg-phys
  is the number of the physical entity to which the element belongs; reg-phys must be a postive integer, or zero. If reg-phys is equal to zero, the element is considered not to belong to any physical entity.
reg-elem
  is the number of the elementary entity to which the element belongs; reg-elem must be a postive (non-zero) integer.
number-of-nodes
  is the number of nodes for the n-th element. This is redundant, but kept for backward compatibility.
node-number-list
  is the list of the number-of-nodes node numbers of the n-th element. The ordering of the nodes is given in Node ordering.

Next: POS binary file format, Previous: MSH file format version 1.0, Up: Legacy formats

#### 9.4.2 POS ASCII file format (Legacy)

The POS ASCII file is Gmsh's old native post-processing format, now superseded by the format described in MSH ASCII file format. It is defined as follows:

         $PostFormat
         1.4 file-type data-size
         $EndPostFormat
         $View
         view-name nb-time-steps
         nb-scalar-points nb-vector-points nb-tensor-points
         nb-scalar-lines nb-vector-lines nb-tensor-lines
         nb-scalar-triangles nb-vector-triangles nb-tensor-triangles
         nb-scalar-quadrangles nb-vector-quadrangles nb-tensor-quadrangles
         nb-scalar-tetrahedra nb-vector-tetrahedra nb-tensor-tetrahedra
         nb-scalar-hexahedra nb-vector-hexahedra nb-tensor-hexahedra
         nb-scalar-prisms nb-vector-prisms nb-tensor-prisms
         nb-scalar-pyramids nb-vector-pyramids nb-tensor-pyramids
         nb-scalar-lines2 nb-vector-lines2 nb-tensor-lines2
         nb-scalar-triangles2 nb-vector-triangles2 nb-tensor-triangles2
         nb-scalar-quadrangles2 nb-vector-quadrangles2 nb-tensor-quadrangles2
         nb-scalar-tetrahedra2 nb-vector-tetrahedra2 nb-tensor-tetrahedra2
         nb-scalar-hexahedra2 nb-vector-hexahedra2 nb-tensor-hexahedra2
         nb-scalar-prisms2 nb-vector-prisms2 nb-tensor-prisms2
         nb-scalar-pyramids2 nb-vector-pyramids2 nb-tensor-pyramids2
         nb-text2d nb-text2d-chars nb-text3d nb-text3d-chars
         time-step-values
         < scalar-point-value > ... < vector-point-value > ...
             < tensor-point-value > ...
         < scalar-line-value > ... < vector-line-value > ...
             < tensor-line-value > ...
         < scalar-triangle-value > ... < vector-triangle-value > ...
             < tensor-triangle-value > ...
         < scalar-quadrangle-value > ... < vector-quadrangle-value > ...
             < tensor-quadrangle-value > ...
         < scalar-tetrahedron-value > ... < vector-tetrahedron-value > ...
             < tensor-tetrahedron-value > ...
         < scalar-hexahedron-value > ... < vector-hexahedron-value > ...
             < tensor-hexahedron-value > ...
         < scalar-prism-value > ... < vector-prism-value > ...
             < tensor-prism-value > ...
         < scalar-pyramid-value > ... < vector-pyramid-value > ...
             < tensor-pyramid-value > ...
         < scalar-line2-value > ... < vector-line2-value > ...
             < tensor-line2-value > ...
         < scalar-triangle2-value > ... < vector-triangle2-value > ...
             < tensor-triangle2-value > ...
         < scalar-quadrangle2-value > ... < vector-quadrangle2-value > ...
             < tensor-quadrangle2-value > ...
         < scalar-tetrahedron2-value > ... < vector-tetrahedron2-value > ...
             < tensor-tetrahedron2-value > ...
         < scalar-hexahedron2-value > ... < vector-hexahedron2-value > ...
             < tensor-hexahedron2-value > ...
         < scalar-prism2-value > ... < vector-prism2-value > ...
             < tensor-prism2-value > ...
         < scalar-pyramid2-value > ... < vector-pyramid2-value > ...
             < tensor-pyramid2-value > ...
         < text2d > ... < text2d-chars > ...
         < text3d > ... < text3d-chars > ...
         $EndView

where

file-type
  is an integer equal to 0 in the ASCII file format.
data-size
  is an integer equal to the size of the floating point numbers used in the file (usually, data-size = sizeof(double)).
view-name
  is a string containing the name of the view (max. 256 characters).
nb-time-steps
  is an integer giving the number of time steps in the view.
nb-scalar-points
nb-vector-points
`...`
  are integers giving the number of scalar points, vector points, ..., in the view.
nb-text2d
nb-text3d
  are integers giving the number of 2D and 3D text strings in the view.
nb-text2d-chars
nb-text3d-chars
  are integers giving the total number of characters in the 2D and 3D strings.
time-step-values
  is a list of nb-time-steps double precision numbers giving the value of the time (or any other variable) for which an evolution was saved.
scalar-point-value
vector-point-value
`...`
  are lists of double precision numbers giving the node coordinates and the values associated with the nodes of the nb-scalar-points scalar points, nb-vector-points vector points, ..., for each of the time-step-values.

  For example, vector-triangle-value is defined as:

                coord1-node1 coord1-node2 coord1-node3
                coord2-node1 coord2-node2 coord2-node3
                coord3-node1 coord3-node2 coord3-node3
                comp1-node1-time1 comp2-node1-time1 comp3-node1-time1
                comp1-node2-time1 comp2-node2-time1 comp3-node2-time1
                comp1-node3-time1 comp2-node3-time1 comp3-node3-time1
                comp1-node1-time2 comp2-node1-time2 comp3-node1-time2
                comp1-node2-time2 comp2-node2-time2 comp3-node2-time2
                comp1-node3-time2 comp2-node3-time2 comp3-node3-time2
                ...

  The ordering of the nodes is given in Node ordering.

text2d
  is a list of 4 double precision numbers:

                coord1 coord2 style index

  where coord1 and coord2 give the X-Y position of the 2D string in screen coordinates (measured from the top-left corner of the window) and where index gives the starting index of the string in text2d-chars. If coord1 (respectively coord2) is negative, the position is measured from the right (respectively bottom) edge of the window. If coord1 (respectively coord2) is larger than 99999, the string is centered horizontally (respectively vertically). If style is equal to zero, the text is aligned bottom-left and displayed using the default font and size. Otherwise, style is converted into an integer whose eight lower bits give the font size, whose eight next bits select the font (the index corresponds to the position in the font menu in the GUI), and whose eight next bits define the text alignment (0=bottom-left, 1=bottom-center, 2=bottom-right, 3=top-left, 4=top-center, 5=top-right, 6=center-left, 7=center-center, 8=center-right).

text2d-chars
  is a list of nb-text2d-chars characters. Substrings are separated with the null ``\0`' character.
text3d
  is a list of 5 double precision numbers

                coord1 coord2 coord3 style index

  where coord1, coord2 and coord3 give the XYZ coordinates of the string in model (real world) coordinates, index gives the starting index of the string in text3d-chars, and style has the same meaning as in text2d.

text3d-chars
  is a list of nb-text3d-chars chars. Substrings are separated with the null ``\0`' character.

Previous: POS ASCII file format, Up: Legacy formats

#### 9.4.3 POS binary file format (Legacy)

The POS binary file format is the same as the POS ASCII file format described in POS ASCII file format, except that:

1. file-type equals 1.
2. all lists of floating point numbers and characters are written in binary format
3. there is an additional integer, of value 1, written before time-step-values. This integer is used for detecting if the computer on which the binary file was written and the computer on which the file is read are of the same type (little or big endian).

Here is a pseudo C code to write a post-processing file in binary format:

         int one = 1;

         fprintf(file, "$PostFormat\n");
         fprintf(file, "%g %d %d\n", 1.4, 1, sizeof(double));
         fprintf(file, "$EndPostFormat\n");
         fprintf(file, "$View\n");
         fprintf(file, "%s %d "
           "%d %d %d %d %d %d %d %d %d "
           "%d %d %d %d %d %d %d %d %d "
           "%d %d %d %d %d %d %d %d %d "
           "%d %d %d %d %d %d %d %d %d "
           "%d %d %d %d %d %d %d %d %d "
           "%d %d %d %d\n",
           view-name, nb-time-steps,
           nb-scalar-points, nb-vector-points, nb-tensor-points,
           nb-scalar-lines, nb-vector-lines, nb-tensor-lines,
           nb-scalar-triangles, nb-vector-triangles, nb-tensor-triangles,
           nb-scalar-quadrangles, nb-vector-quadrangles, nb-tensor-quadrangles,
           nb-scalar-tetrahedra, nb-vector-tetrahedra, nb-tensor-tetrahedra,
           nb-scalar-hexahedra, nb-vector-hexahedra, nb-tensor-hexahedra,
           nb-scalar-prisms, nb-vector-prisms, nb-tensor-prisms,
           nb-scalar-pyramids, nb-vector-pyramids, nb-tensor-pyramids,
           nb-scalar-lines2, nb-vector-lines2, nb-tensor-lines2,
           nb-scalar-triangles2, nb-vector-triangles2, nb-tensor-triangles2,
           nb-scalar-quadrangles2, nb-vector-quadrangles2, nb-tensor-quadrangles2,
           nb-scalar-tetrahedra2, nb-vector-tetrahedra2, nb-tensor-tetrahedra2,
           nb-scalar-hexahedra2, nb-vector-hexahedra2, nb-tensor-hexahedra2,
           nb-scalar-prisms2, nb-vector-prisms2, nb-tensor-prisms2,
           nb-scalar-pyramids2, nb-vector-pyramids2, nb-tensor-pyramids2,
           nb-text2d, nb-text2d-chars, nb-text3d, nb-text3d-chars);
         fwrite(&one, sizeof(int), 1, file);
         fwrite(time-step-values, sizeof(double), nb-time-steps, file);
         fwrite(all-scalar-point-values, sizeof(double), ..., file);
         ...
         fprintf(file, "\n$EndView\n");

In this pseudo-code, all-scalar-point-values is the array of double precision numbers containing all the scalar-point-value lists, put one after each other in order to form a long array of doubles. The principle is the same for all other kinds of values.

Next: Options, Previous: File formats, Up: Top

## Appendix A Tutorial

The following examples introduce new features gradually, starting with t1.geo. The files corresponding to these examples are available in the tutorial 25 directory of the Gmsh distribution.

To learn how to run Gmsh on your computer, see Running Gmsh on your system. Screencasts that show how to use the GUI are available on http://geuz.org/gmsh/screencasts/.

Next: t2.geo, Previous: Tutorial, Up: Tutorial

### A.1 t1.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 1
     *
     *  Variables, elementary entities (points, lines, surfaces), physical
     *  entities (points, lines, surfaces)
     *
     *********************************************************************/

    // The simplest construction in Gmsh's scripting language is the
    // `affectation'. The following command defines a new variable `lc':

    lc = 1e-2;

    // This variable can then be used in the definition of Gmsh's simplest
    // `elementary entity', a `Point'. A Point is defined by a list of four numbers:
    // three coordinates (X, Y and Z), and a characteristic length (lc) that sets
    // the target element size at the point:

    Point(1) = {0, 0, 0, lc};

    // The distribution of the mesh element sizes is then obtained by interpolation
    // of these characteristic lengths throughout the geometry. Another method to
    // specify characteristic lengths is to use a background mesh (see `t7.geo' and
    // `bgmesh.pos').

    // We can then define some additional points as well as our first curve.  Curves
    // are Gmsh's second type of elementery entities, and, amongst curves, straight
    // lines are the simplest. A straight line is defined by a list of point
    // numbers. In the commands below, for example, the line 1 starts at point 1 and
    // ends at point 2:

    Point(2) = {.1, 0,  0, lc} ;
    Point(3) = {.1, .3, 0, lc} ;
    Point(4) = {0,  .3, 0, lc} ;

    Line(1) = {1,2} ;
    Line(2) = {3,2} ;
    Line(3) = {3,4} ;
    Line(4) = {4,1} ;

    // The third elementary entity is the surface. In order to define a simple
    // rectangular surface from the four lines defined above, a line loop has first
    // to be defined. A line loop is a list of connected lines, a sign being
    // associated with each line (depending on the orientation of the line):

    Line Loop(5) = {4,1,-2,3} ;

    // We can then define the surface as a list of line loops (only one here, since
    // there are no holes--see `t4.geo'):

    Plane Surface(6) = {5} ;

    // At this level, Gmsh knows everything to display the rectangular surface 6 and
    // to mesh it. An optional step is needed if we want to associate specific
    // region numbers to the various elements in the mesh (e.g. to the line segments
    // discretizing lines 1 to 4 or to the triangles discretizing surface 6). This
    // is achieved by the definition of `physical entities'. Physical entities will
    // group elements belonging to several elementary entities by giving them a
    // common number (a region number).

    // We can for example group the points 1 and 2 into the physical entity 1:

    Physical Point(1) = {1,2} ;

    // Consequently, two punctual elements will be saved in the output mesh file,
    // both with the region number 1. The mechanism is identical for line or surface
    // elements:

    MY_LINE = 2;
    Physical Line(MY_LINE) = {1,2} ;
    Physical Line("My second line (auto physical id)") = {3} ;
    Physical Line("My third line (physical id 5)", 5) = {4} ;
    Physical Surface("My surface") = {6} ;

    // All the line elements created during the meshing of lines 1 and 2 will be
    // saved in the output mesh file with the physical id 2. The elements from line
    // 3 will be saved in the output mesh file with an automatic physical id,
    // associated with the label "My second line (auto physical id)". The elements
    // from line 4 will be saved with physical id 5, associated with the label "My
    // third line (physical id 5)". And finally, all the triangular elements
    // resulting from the discretization of surface 6 will be given an automatic
    // physical id associated with the label "My surface").

    // Note that if no physical entities are defined, then all the elements in the
    // mesh will be saved "as is", with their default orientation.

Next: t3.geo, Previous: t1.geo, Up: Tutorial

### A.2 t2.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 2
     *
     *  Includes, geometrical transformations, extruded geometries,
     *  elementary entities (volumes), physical entities (volumes)
     *
     *********************************************************************/

    // We first include the previous tutorial file, in order to use it as a basis
    // for this one:

    Include "t1.geo";

    // We can then add new points and lines in the same way as we did in `t1.geo':

    Point(5) = {0, .4, 0, lc};
    Line(5) = {4, 5};

    // But Gmsh also provides tools to tranform (translate, rotate, etc.)
    // elementary entities or copies of elementary entities. For example, the point
    // 3 can be moved by 0.05 units to the left with:

    Translate {-0.05, 0, 0} { Point{3}; }

    // The resulting point can also be duplicated and translated by 0.1 along the y
    // axis:

    Translate {0, 0.1, 0} { Duplicata{ Point{3}; } }

    // This command created a new point with an automatically assigned id. This id
    // can be obtained using the graphical user interface by hovering the mouse over
    // it and looking at the bottom of the graphic window: in this case, the new
    // point has id "6". Point 6 can then be used to create new entities, e.g.:

    Line(7) = {3, 6};
    Line(8) = {6, 5};
    Line Loop(10) = {5,-8,-7,3};
    Plane Surface(11) = {10};

    // Using the graphical user interface to obtain the ids of newly created
    // entities can sometimes be cumbersome. It can then be advantageous to use the
    // return value of the transformation commands directly. For example, the
    // Translate command returns a list containing the ids of the translated
    // entities. For example, we can translate copies of the two surfaces 6 and 11
    // to the right with the following command:

    my_new_surfs[] = Translate {0.12, 0, 0} { Duplicata{ Surface{6, 11}; } };

    // my_new_surfs[] (note the square brackets) denotes a list, which in this case
    // contains the ids of the two new surfaces (check `Tools->Message console' to
    // see the message):

    Printf("New surfaces '%g' and '%g'", my_new_surfs[0], my_new_surfs[1]);

    // In Gmsh lists use square brackets for their definition (mylist[] = {1,2,3};)
    // as well as to access their elements (myotherlist[] = {mylist[0],
    // mylist[2]};). Note that list indexing starts at 0.

    // Volumes are the fourth type of elementary entities in Gmsh. In the same way
    // one defines line loops to build surfaces, one has to define surface loops
    // (i.e. `shells') to build volumes. The following volume does not have holes
    // and thus consists of a single surface loop:

    Point(100) = {0., 0.3, 0.13, lc};  Point(101) = {0.08, 0.3, 0.1, lc};
    Point(102) = {0.08, 0.4, 0.1, lc}; Point(103) = {0., 0.4, 0.13, lc};

    Line(110) = {4, 100};   Line(111) = {3, 101};
    Line(112) = {6, 102};   Line(113) = {5, 103};
    Line(114) = {103, 100}; Line(115) = {100, 101};
    Line(116) = {101, 102}; Line(117) = {102, 103};

    Line Loop(118) = {115, -111, 3, 110};  Plane Surface(119) = {118};
    Line Loop(120) = {111, 116, -112, -7}; Plane Surface(121) = {120};
    Line Loop(122) = {112, 117, -113, -8}; Plane Surface(123) = {122};
    Line Loop(124) = {114, -110, 5, 113};  Plane Surface(125) = {124};
    Line Loop(126) = {115, 116, 117, 114}; Plane Surface(127) = {126};

    Surface Loop(128) = {127, 119, 121, 123, 125, 11};
    Volume(129) = {128};

    // When a volume can be extruded from a surface, it is usually easier to use the
    // Extrude command directly instead of creating all the points, lines and
    // surfaces by hand. For example, the following command extrudes the surface 11
    // along the z axis and automatically creates a new volume (as well as all the
    // needed points, lines and surfaces):

    Extrude {0, 0, 0.12} { Surface{my_new_surfs[1]}; }

    // The following command permits to manually assign a characteristic length to
    // some of the new points:

    Characteristic Length {103, 105, 109, 102, 28, 24, 6, 5} = lc * 3;

    // Note that, if the transformation tools are handy to create complex
    // geometries, it is also sometimes useful to generate the `flat' geometry, with
    // an explicit list of all elementary entities. This can be achieved by
    // selecting the `File->Save as->Gmsh unrolled geometry' menu or by typing
    //
    // > gmsh t2.geo -0
    //
    // on the command line.

    // To save all the tetrahedra discretizing the volumes 129 and 130 with a common
    // region number, we finally define a physical volume:

    Physical Volume (1) = {129,130};

Next: t4.geo, Previous: t2.geo, Up: Tutorial

### A.3 t3.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 3
     *
     *  Extruded meshes, parameters, options
     *
     *********************************************************************/

    // Again, we start by including the first tutorial:

    Include "t1.geo";

    // As in `t2.geo', we plan to perform an extrusion along the z axis.  But here,
    // instead of only extruding the geometry, we also want to extrude the 2D
    // mesh. This is done with the same `Extrude' command, but by specifying element
    // 'Layers' (2 layers in this case, the first one with 8 subdivisions and the
    // second one with 2 subdivisions, both with a height of h/2):

    h = 0.1;

    Extrude {0,0,h} {
      Surface{6}; Layers{ {8,2}, {0.5,1} };
    }

    // The extrusion can also be performed with a rotation instead of a translation,
    // and the resulting mesh can be recombined into prisms (we use only one layer
    // here, with 7 subdivisions). All rotations are specified by an axis direction
    // ({0,1,0}), an axis point ({-0.1,0,0.1}) and a rotation angle (-Pi/2):

    Extrude { {0,1,0} , {-0.1,0,0.1} , -Pi/2 } {
      Surface{28}; Layers{7}; Recombine;
    }

    // Note that a translation ({-2*h,0,0}) and a rotation ({1,0,0}, {0,0.15,0.25},
    // Pi/2) can also be combined. Here the angle is specified as a 'parameter',
    // using the 'DefineConstant' syntax.  This parameter can be modified
    // insteractively in the GUI, and can be exchanged with other codes using the
    // ONELAB framework:

    DefineConstant[ angle = {90, Min 0, Max 120, Step 1,
                             Name "Parameters/Twisting angle"} ];

    out[] = Extrude { {-2*h,0,0}, {1,0,0} , {0,0.15,0.25} , angle * Pi / 180 } {
      Surface{50}; Layers{10}; Recombine;
    };

    // In this last extrusion command we retrieved the volume number programatically
    // by using the return value (a list) of the Extrude command. This list contains
    // the "top" of the extruded surface (in out[0]), the newly created volume (in
    // out[1]) and the ids of the lateral surfaces (in out[2], out[3], ...)

    // We can then define a new physical volume to save all the tetrahedra with a
    // common region number (101):

    Physical Volume(101) = {1, 2, out[1]};

    // Let us now change some options... Since all interactive options are
    // accessible in Gmsh's scripting language, we can for example make point tags
    // visible or redefine some colors directly in the input file:

    Geometry.PointNumbers = 1;
    Geometry.Color.Points = Orange;
    General.Color.Text = White;
    Mesh.Color.Points = {255,0,0};

    // Note that all colors can be defined literally or numerically, i.e.
    // `Mesh.Color.Points = Red' is equivalent to `Mesh.Color.Points = {255,0,0}';
    // and also note that, as with user-defined variables, the options can be used
    // either as right or left hand sides, so that the following command will set
    // the surface color to the same color as the points:

    Geometry.Color.Surfaces = Geometry.Color.Points;

    // You can use the `Help->Current options' menu to see the current values of all
    // options. To save all the options in a file, use `File->Save as->Gmsh
    // options'. To associate the current options with the current file use
    // `File->Save Options->For Current File'. To save the current options for all
    // future Gmsh sessions use `File->Save Options->As default'.

Next: t5.geo, Previous: t3.geo, Up: Tutorial

### A.4 t4.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 4
     *
     *  Built-in functions, surface holes, annotations, mesh colors
     *
     *********************************************************************/

    // As usual, we start by defining some variables:

    cm = 1e-02;
    e1 = 4.5 * cm; e2 = 6 * cm / 2; e3 =  5 * cm / 2;
    h1 = 5 * cm; h2 = 10 * cm; h3 = 5 * cm; h4 = 2 * cm; h5 = 4.5 * cm;
    R1 = 1 * cm; R2 = 1.5 * cm; r = 1 * cm;
    Lc1 = 0.01;
    Lc2 = 0.003;

    // We can use all the usual mathematical functions (note the capitalized first
    // letters), plus some useful functions like Hypot(a, b) := Sqrt(a^2 + b^2):

    ccos = (-h5*R1 + e2 * Hypot(h5, Hypot(e2, R1))) / (h5^2 + e2^2);
    ssin = Sqrt(1 - ccos^2);

    // Then we define some points and some lines using these variables:

    Point(1) = {-e1-e2, 0    , 0, Lc1}; Point(2) = {-e1-e2, h1   , 0, Lc1};
    Point(3) = {-e3-r , h1   , 0, Lc2}; Point(4) = {-e3-r , h1+r , 0, Lc2};
    Point(5) = {-e3   , h1+r , 0, Lc2}; Point(6) = {-e3   , h1+h2, 0, Lc1};
    Point(7) = { e3   , h1+h2, 0, Lc1}; Point(8) = { e3   , h1+r , 0, Lc2};
    Point(9) = { e3+r , h1+r , 0, Lc2}; Point(10)= { e3+r , h1   , 0, Lc2};
    Point(11)= { e1+e2, h1   , 0, Lc1}; Point(12)= { e1+e2, 0    , 0, Lc1};
    Point(13)= { e2   , 0    , 0, Lc1};

    Point(14)= { R1 / ssin, h5+R1*ccos, 0, Lc2};
    Point(15)= { 0        , h5        , 0, Lc2};
    Point(16)= {-R1 / ssin, h5+R1*ccos, 0, Lc2};
    Point(17)= {-e2       , 0.0       , 0, Lc1};

    Point(18)= {-R2 , h1+h3   , 0, Lc2}; Point(19)= {-R2 , h1+h3+h4, 0, Lc2};
    Point(20)= { 0  , h1+h3+h4, 0, Lc2}; Point(21)= { R2 , h1+h3+h4, 0, Lc2};
    Point(22)= { R2 , h1+h3   , 0, Lc2}; Point(23)= { 0  , h1+h3   , 0, Lc2};

    Point(24)= { 0, h1+h3+h4+R2, 0, Lc2}; Point(25)= { 0, h1+h3-R2,    0, Lc2};

    Line(1)  = {1 , 17};
    Line(2)  = {17, 16};

    // Gmsh provides other curve primitives than stright lines: splines, B-splines,
    // circle arcs, ellipse arcs, etc. Here we define a new circle arc, starting at
    // point 14 and ending at point 16, with the circle's center being the point 15:

    Circle(3) = {14,15,16};

    // Note that, in Gmsh, circle arcs should always be smaller than Pi. We can then
    // define additional lines and circles, as well as a new surface:

    Line(4)  = {14,13}; Line(5)   = {13,12};  Line(6)  = {12,11};
    Line(7)  = {11,10}; Circle(8) = {8,9,10}; Line(9)  = {8,7};
    Line(10) = {7,6};   Line(11)  = {6,5};    Circle(12) = {3,4,5};
    Line(13) = {3,2};   Line(14)  = {2,1};    Line(15) = {18,19};
    Circle(16) = {21,20,24}; Circle(17) = {24,20,19};
    Circle(18) = {18,23,25}; Circle(19) = {25,23,22};
    Line(20) = {21,22};

    Line Loop(21) = {17,-15,18,19,-20,16};
    Plane Surface(22) = {21};

    // But we still need to define the exterior surface. Since this surface has a
    // hole, its definition now requires two lines loops:

    Line Loop(23) = {11,-12,13,14,1,2,-3,4,5,6,7,-8,9,10};
    Plane Surface(24) = {23,21};

    // As a general rule, if a surface has N holes, it is defined by N+1 line loops:
    // the first loop defines the exterior boundary; the other loops define the
    // boundaries of the holes.

    // Finally, we can add some comments by embedding a post-processing view
    // containing some strings:

    View "comments" {
      // Add a text string in window coordinates, 10 pixels from the left and 10
      // pixels from the bottom, using the StrCat function to concatenate strings:
      T2(10, -10, 0){ StrCat("Created on ", Today, " with Gmsh") };

      // Add a text string in model coordinates centered at (X,Y,Z) = (0, 0.11, 0):
      T3(0, 0.11, 0, TextAttributes("Align", "Center", "Font", "Helvetica")){ "Hole" };

      // If a string starts with `file://', the rest is interpreted as an image
      // file. For 3D annotations, the size in model coordinates can be specified
      // after a `@' symbol in the form `widthxheight' (if one of `width' or
      // `height' is zero, natural scaling is used; if both are zero, original image
      // dimensions in pixels are used):
      T3(0, 0.09, 0, TextAttributes("Align", "Center")){ "file://image.png@0.01x0" };

      // The 3D orientation of the image can be specified by proving the direction
      // of the bottom and left edge of the image in model space:
      T3(-0.01, 0.09, 0, 0){ "file://image.png@0.01x0,0,0,1,0,1,0" };

      // The image can also be drawn in "billboard" mode, i.e. always parallel to
      // the camera, by using the `#' symbol:
      T3(0, 0.12, 0, TextAttributes("Align", "Center")){ "file://image.png@0.01x0#" };

      // The size of 2D annotations is goven directly in pixels:
      T2(350, -7, 0){ "file://image.png@20x0" };
    };

    // Views and geometrical entities can be made to respond to double-click events:

    View[0].DoubleClickedCommand = "Printf('View[0] has been double-clicked!');";
    Geometry.DoubleClickedLineCommand = "Printf('Line %g has been double-clicked!',
      Geometry.DoubleClickedEntityTag);";

    // We can also change the color of some mesh entities:

    Color Grey50{ Surface{ 22 }; }
    Color Purple{ Surface{ 24 }; }
    Color Red{ Line{ 1:14 }; }
    Color Yellow{ Line{ 15:20 }; }

Next: t6.geo, Previous: t4.geo, Up: Tutorial

### A.5 t5.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 5
     *
     *  Characteristic lengths, arrays of variables, macros, loops
     *
     *********************************************************************/

    // We start by defining some target mesh sizes:

    lcar1 = .1;
    lcar2 = .0005;
    lcar3 = .055;

    // If we wanted to change these mesh sizes globally (without changing the above
    // definitions), we could give a global scaling factor for all characteristic
    // lengths on the command line with the `-clscale' option (or with
    // `Mesh.CharacteristicLengthFactor' in an option file). For example, with:
    //
    // > gmsh t5.geo -clscale 1
    //
    // this input file produces a mesh of approximately 1,300 nodes and 11,000
    // tetrahedra. With
    //
    // > gmsh t5.geo -clscale 0.2
    //
    // the mesh counts approximately 350,000 nodes and 2.1 million tetrahedra. You
    // can check mesh statistics in the graphical user interface with the
    // `Tools->Statistics' menu.

    // We proceed by defining some elementary entities describing a truncated cube:

    Point(1) = {0.5,0.5,0.5,lcar2}; Point(2) = {0.5,0.5,0,lcar1};
    Point(3) = {0,0.5,0.5,lcar1};   Point(4) = {0,0,0.5,lcar1};
    Point(5) = {0.5,0,0.5,lcar1};   Point(6) = {0.5,0,0,lcar1};
    Point(7) = {0,0.5,0,lcar1};     Point(8) = {0,1,0,lcar1};
    Point(9) = {1,1,0,lcar1};       Point(10) = {0,0,1,lcar1};
    Point(11) = {0,1,1,lcar1};      Point(12) = {1,1,1,lcar1};
    Point(13) = {1,0,1,lcar1};      Point(14) = {1,0,0,lcar1};

    Line(1) = {8,9};    Line(2) = {9,12};  Line(3) = {12,11};
    Line(4) = {11,8};   Line(5) = {9,14};  Line(6) = {14,13};
    Line(7) = {13,12};  Line(8) = {11,10}; Line(9) = {10,13};
    Line(10) = {10,4};  Line(11) = {4,5};  Line(12) = {5,6};
    Line(13) = {6,2};   Line(14) = {2,1};  Line(15) = {1,3};
    Line(16) = {3,7};   Line(17) = {7,2};  Line(18) = {3,4};
    Line(19) = {5,1};   Line(20) = {7,8};  Line(21) = {6,14};

    Line Loop(22) = {-11,-19,-15,-18};   Plane Surface(23) = {22};
    Line Loop(24) = {16,17,14,15};       Plane Surface(25) = {24};
    Line Loop(26) = {-17,20,1,5,-21,13}; Plane Surface(27) = {26};
    Line Loop(28) = {-4,-1,-2,-3};       Plane Surface(29) = {28};
    Line Loop(30) = {-7,2,-5,-6};        Plane Surface(31) = {30};
    Line Loop(32) = {6,-9,10,11,12,21};  Plane Surface(33) = {32};
    Line Loop(34) = {7,3,8,9};           Plane Surface(35) = {34};
    Line Loop(36) = {-10,18,-16,-20,4,-8}; Plane Surface(37) = {36};
    Line Loop(38) = {-14,-13,-12,19};    Plane Surface(39) = {38};

    // Instead of using included files, we now use a user-defined macro in order
    // to carve some holes in the cube:

    Macro CheeseHole

      // In the following commands we use the reserved variable name `newp', which
      // automatically selects a new point number. This number is chosen as the
      // highest current point number, plus one. (Note that, analogously to `newp',
      // the variables `newl', `news', `newv' and `newreg' select the highest number
      // amongst currently defined curves, surfaces, volumes and `any entities other
      // than points', respectively.)

      p1 = newp; Point(p1) = {x,  y,  z,  lcar3} ;
      p2 = newp; Point(p2) = {x+r,y,  z,  lcar3} ;
      p3 = newp; Point(p3) = {x,  y+r,z,  lcar3} ;
      p4 = newp; Point(p4) = {x,  y,  z+r,lcar3} ;
      p5 = newp; Point(p5) = {x-r,y,  z,  lcar3} ;
      p6 = newp; Point(p6) = {x,  y-r,z,  lcar3} ;
      p7 = newp; Point(p7) = {x,  y,  z-r,lcar3} ;

      c1 = newreg; Circle(c1) = {p2,p1,p7}; c2 = newreg; Circle(c2) = {p7,p1,p5};
      c3 = newreg; Circle(c3) = {p5,p1,p4}; c4 = newreg; Circle(c4) = {p4,p1,p2};
      c5 = newreg; Circle(c5) = {p2,p1,p3}; c6 = newreg; Circle(c6) = {p3,p1,p5};
      c7 = newreg; Circle(c7) = {p5,p1,p6}; c8 = newreg; Circle(c8) = {p6,p1,p2};
      c9 = newreg; Circle(c9) = {p7,p1,p3}; c10 = newreg; Circle(c10) = {p3,p1,p4};
      c11 = newreg; Circle(c11) = {p4,p1,p6}; c12 = newreg; Circle(c12) = {p6,p1,p7};

      // We need non-plane surfaces to define the spherical holes. Here we use ruled
      // surfaces, which can have 3 or 4 sides:

      l1 = newreg; Line Loop(l1) = {c5,c10,c4};   Ruled Surface(newreg) = {l1};
      l2 = newreg; Line Loop(l2) = {c9,-c5,c1};   Ruled Surface(newreg) = {l2};
      l3 = newreg; Line Loop(l3) = {c12,-c8,-c1}; Ruled Surface(newreg) = {l3};
      l4 = newreg; Line Loop(l4) = {c8,-c4,c11};  Ruled Surface(newreg) = {l4};
      l5 = newreg; Line Loop(l5) = {-c10,c6,c3};  Ruled Surface(newreg) = {l5};
      l6 = newreg; Line Loop(l6) = {-c11,-c3,c7}; Ruled Surface(newreg) = {l6};
      l7 = newreg; Line Loop(l7) = {-c2,-c7,-c12};Ruled Surface(newreg) = {l7};
      l8 = newreg; Line Loop(l8) = {-c6,-c9,c2};  Ruled Surface(newreg) = {l8};

      // We then store the surface loops identification numbers in a list for later
      // reference (we will need these to define the final volume):

      theloops[t] = newreg ;

      Surface Loop(theloops[t]) = {l8+1,l5+1,l1+1,l2+1,l3+1,l7+1,l6+1,l4+1};

      thehole = newreg ;
      Volume(thehole) = theloops[t] ;

    Return

    // We can use a `For' loop to generate five holes in the cube:

    x = 0 ; y = 0.75 ; z = 0 ; r = 0.09 ;

    For t In {1:5}

      x += 0.166 ;
      z += 0.166 ;

      // We call the `CheeseHole' macro:

      Call CheeseHole ;

      // We define a physical volume for each hole:

      Physical Volume (t) = thehole ;

      // We also print some variables on the terminal (note that, since all
      // variables are treated internally as floating point numbers, the format
      // string should only contain valid floating point format specifiers like
      // `%g', `%f', '%e', etc.):

      Printf("Hole %g (center = {%g,%g,%g}, radius = %g) has number %g!",
    	 t, x, y, z, r, thehole) ;

    EndFor

    // We can then define the surface loop for the exterior surface of the cube:

    theloops[0] = newreg ;

    Surface Loop(theloops[0]) = {35,31,29,37,33,23,39,25,27} ;

    // The volume of the cube, without the 5 holes, is now defined by 6 surface
    // loops: the first surface loop defines the exterior surface; the surface loops
    // other than the first one define holes.  (Again, to reference an array of
    // variables, its identifier is followed by square brackets):

    Volume(186) = {theloops[]} ;

    // We finally define a physical volume for the elements discretizing the cube,
    // without the holes (whose elements were already tagged with numbers 1 to 5 in
    // the `For' loop):

    Physical Volume (10) = 186 ;

    // We could make only part of the model visible to only mesh this subset:
    //
    // Hide "*";
    // Recursive Show { Volume{129}; }
    // Mesh.MeshOnlyVisible=1;

Next: t7.geo, Previous: t5.geo, Up: Tutorial

### A.6 t6.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 6
     *
     *  Transfinite meshes
     *
     *********************************************************************/

    // Let's use the geometry from the first tutorial as a basis for this one
    Include "t1.geo";

    // Delete the left line and create replace it with 3 new ones
    Delete{ Surface{6}; Line{4}; }

    p1 = newp; Point(p1) = {-0.05, 0.05, 0, lc};
    p2 = newp; Point(p2) = {-0.05, 0.1, 0, lc};

    l1 = newl; Line(l1) = {1, p1};
    l2 = newl; Line(l2) = {p1, p2};
    l3 = newl; Line(l3) = {p2, 4};

    // Create surface
    Line Loop(1) = {2, -1, l1, l2, l3, -3};
    Plane Surface(1) = {-1};

    // Put 20 points with a refinement toward the extremities on curve 2
    Transfinite Line{2} = 20 Using Bump 0.05;

    // Put 20 points total on combination of curves l1, l2 and l3 (beware that the
    // points p1 and p2 are shared by the curves, so we do not create 6 + 6 + 10 =
    // 22 points, but 20!)
    Transfinite Line{l1} = 6;
    Transfinite Line{l2} = 6;
    Transfinite Line{l3} = 10;

    // Put 30 points following a geometric progression on curve 1 (reversed) and on
    // curve 3
    Transfinite Line{-1,3} = 30 Using Progression 1.2;

    // Define the Surface as transfinite, by specifying the four corners of the
    // transfinite interpolation
    Transfinite Surface{1} = {1,2,3,4};

    // (Note that the list on the right hand side refers to points, not curves. When
    // the surface has only 3 or 4 points on its boundary the list can be
    // omitted. The way triangles are generated can be controlled by appending
    // "Left", "Right" or "Alternate" after the list.)

    // Recombine the triangles into quads
    Recombine Surface{1};

    // Apply an elliptic smoother to the grid
    Mesh.Smoothing = 100;

    Physical Surface(1) = 1;

Next: t8.geo, Previous: t6.geo, Up: Tutorial

### A.7 t7.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 7
     *
     *  Background mesh
     *
     *********************************************************************/

    // Characteristic lengths can be specified very accuractely by providing a
    // background mesh, i.e., a post-processing view that contains the target mesh
    // sizes.

    // Merge the first tutorial
    Merge "t1.geo";

    // Merge a post-processing view containing the target mesh sizes
    Merge "bgmesh.pos";

    // Apply the view as the current background mesh
    Background Mesh View[0];

Next: t9.geo, Previous: t7.geo, Up: Tutorial

### A.8 t8.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 8
     *
     *  Post-processing, scripting, animations, options
     *
     *********************************************************************/

    // We first include `t1.geo' as well as some post-processing views:

    Include "t1.geo";
    Include "view1.pos";
    Include "view1.pos";
    Include "view4.pos";

    // We then set some general options:

    General.Trackball = 0;
    General.RotationX = 0; General.RotationY = 0; General.RotationZ = 0;
    General.Color.Background = White; General.Color.Foreground = Black;
    General.Color.Text = Black;
    General.Orthographic = 0;
    General.Axes = 0; General.SmallAxes = 0;

    // We also set some options for each post-processing view:

    v0 = PostProcessing.NbViews-4;
    v1 = v0+1; v2 = v0+2; v3 = v0+3;

    View[v0].IntervalsType = 2;
    View[v0].OffsetZ = 0.05;
    View[v0].RaiseZ = 0;
    View[v0].Light = 1;
    View[v0].ShowScale = 0;
    View[v0].SmoothNormals = 1;

    View[v1].IntervalsType = 1;
    View[v1].ColorTable = { Green, Blue };
    View[v1].NbIso = 10;
    View[v1].ShowScale = 0;

    View[v2].Name = "Test...";
    View[v2].Axes = 1;
    View[v2].Color.Axes = Black;
    View[v2].IntervalsType = 2;
    View[v2].Type = 2;
    View[v2].IntervalsType = 2;
    View[v2].AutoPosition = 0;
    View[v2].PositionX = 85;
    View[v2].PositionY = 50;
    View[v2].Width = 200;
    View[v2].Height = 130;

    View[v3].Visible = 0;

    // We then loop from 1 to 3 with a step of 1. (To use a different step, just add
    // a third argument in the list. For example, `For num In {0.5:1.5:0.1}' would
    // increment num from 0.5 to 1.5 with a step of 0.1.)

    t = 0;

    For num In {1:3}

      View[v0].TimeStep = t;
      View[v1].TimeStep = t;
      View[v2].TimeStep = t;
      View[v3].TimeStep = t;

      t = (View[v0].TimeStep < View[v0].NbTimeStep-1) ? t+1 : 0;

      View[v0].RaiseZ += 0.01/View[v0].Max * t;

      If (num == 3)
        // We want to create 640x480 frames when num == 3:
        General.GraphicsWidth = General.MenuWidth + 640;
        General.GraphicsHeight = 480;
      EndIf

      frames = 50;

      // It is possible to nest loops:
      For num2 In {1:frames}

        General.RotationX += 10;
        General.RotationY = General.RotationX / 3;
        General.RotationZ += 0.1;

        Sleep 0.01; // sleep for 0.01 second
        Draw; // draw the scene (one could use DrawForceChanged instead to force the
              // reconstruction of the vertex arrays, e.g. if changing element
              // clipping)

        If (num == 3)
          // The `Print' command saves the graphical window; the `Sprintf' function
          // permits to create the file names on the fly:
          /*
          Print Sprintf("t8-%02g.gif", num2);
          Print Sprintf("t8-%02g.ppm", num2);
          Print Sprintf("t8-%02g.jpg", num2);
          */
        EndIf

      EndFor

      If(num == 3)
        // Here we could make a system call to generate a movie. For example,

        // with whirlgif:
        /*
        System "whirlgif -minimize -loop -o t8.gif t8-*.gif";
        */

        // with mpeg_encode (create parameter file first, then run encoder):
        /*
        Printf("PATTERN I") > "t8.par";
        Printf("BASE_FILE_FORMAT PPM") >> "t8.par";
        Printf("GOP_SIZE 1") >> "t8.par";
        Printf("SLICES_PER_FRAME 1") >> "t8.par";
        Printf("PIXEL HALF") >> "t8.par";
        Printf("RANGE 10") >> "t8.par";
        Printf("PSEARCH_ALG EXHAUSTIVE") >> "t8.par";
        Printf("BSEARCH_ALG CROSS2") >> "t8.par";
        Printf("IQSCALE 1") >> "t8.par";
        Printf("PQSCALE 1") >> "t8.par";
        Printf("BQSCALE 25") >> "t8.par";
        Printf("REFERENCE_FRAME DECODED") >> "t8.par";
        Printf("OUTPUT t8.mpg") >> "t8.par";
        Printf("INPUT_CONVERT *") >> "t8.par";
        Printf("INPUT_DIR .") >> "t8.par";
        Printf("INPUT") >> "t8.par";
        tmp = Sprintf("t8-*.ppm [01-%02g]", frames);
        Printf(tmp) >> "t8.par";
        Printf("END_INPUT") >> "t8.par";
        System "mpeg_encode t8.par";
        */

        // with mencoder:
        /*
        System "mencoder 'mf://*.jpg' -mf fps=5 -o t8.mpg -ovc lavc
                -lavcopts vcodec=mpeg1video:vhq";
        System "mencoder 'mf://*.jpg' -mf fps=5 -o t8.mpg -ovc lavc
               -lavcopts vcodec=mpeg4:vhq";
        */

        // with ffmpeg:
        /*
        System "ffmpeg -hq -r 5 -b 800 -vcodec mpeg1video
                -i t8-%02d.jpg t8.mpg"
        System "ffmpeg -hq -r 5 -b 800 -i t8-%02d.jpg t8.asf"
        */
      EndIf

    EndFor

Next: t10.geo, Previous: t8.geo, Up: Tutorial

### A.9 t9.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 9
     *
     *  Post-processing plugins (levelsets, sections, annotations)
     *
     *********************************************************************/

    // Plugins can be added to Gmsh in order to extend its capabilities. For
    // example, post-processing plugins can modify a view, or create a new view
    // based on previously loaded views. Several default plugins are statically
    // linked with Gmsh, e.g. Isosurface, CutPlane, CutSphere, Skin, Transform or
    // Smooth.  Plugins can be controlled in the same way as other options: either
    // from the graphical interface (right click on the view button, then
    // `Plugins'), or from the command file.

    // Let us for example include a three-dimensional scalar view:

    Include "view3.pos" ;

    // We then set some options for the `Isosurface' plugin (which extracts an
    // isosurface from a 3D scalar view), and run it:

    Plugin(Isosurface).Value = 0.67 ; // iso-value level
    Plugin(Isosurface).View = 0 ; // source view is View[0]
    Plugin(Isosurface).Run ; // run the plugin!

    // We also set some options for the `CutPlane' plugin (which computes a section
    // of a 3D view using the plane A*x+B*y+C*z+D=0), and then run it:

    Plugin(CutPlane).A = 0 ;
    Plugin(CutPlane).B = 0.2 ;
    Plugin(CutPlane).C = 1 ;
    Plugin(CutPlane).D = 0 ;
    Plugin(CutPlane).View = 0 ;
    Plugin(CutPlane).Run ;

    // Add a title (By convention, for window coordinates a value greater than 99999
    // represents the center. We could also use `General.GraphicsWidth / 2', but
    // that would only center the string for the current window size.):

    Plugin(Annotate).Text = "A nice title" ;
    Plugin(Annotate).X = 1.e5;
    Plugin(Annotate).Y = 50 ;
    Plugin(Annotate).Font = "Times-BoldItalic" ;
    Plugin(Annotate).FontSize = 28 ;
    Plugin(Annotate).Align = "Center" ;
    Plugin(Annotate).View = 0 ;
    Plugin(Annotate).Run ;

    Plugin(Annotate).Text = "(and a small subtitle)" ;
    Plugin(Annotate).Y = 70 ;
    Plugin(Annotate).Font = "Times-Roman" ;
    Plugin(Annotate).FontSize = 12 ;
    Plugin(Annotate).Run ;

    // We finish by setting some options:

    View[0].Light = 1;
    View[0].IntervalsType = 1;
    View[0].NbIso = 6;
    View[0].SmoothNormals = 1;
    View[1].IntervalsType = 2;
    View[2].IntervalsType = 2;

Next: t11.geo, Previous: t9.geo, Up: Tutorial

### A.10 t10.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 10
     *
     *  General mesh size fields
     *
     *********************************************************************/

    // In addition to specifying target mesh sizes at the points of the
    // geometry (see t1) or using a background mesh (see t7), you can use
    // general mesh size "Fields".

    // Let's create a simple rectangular geometry
    lc = .15;
    Point(1) = {0.0,0.0,0,lc}; Point(2) = {1,0.0,0,lc};
    Point(3) = {1,1,0,lc};     Point(4) = {0,1,0,lc};
    Point(5) = {0.2,.5,0,lc};

    Line(1) = {1,2}; Line(2) = {2,3}; Line(3) = {3,4}; Line(4) = {4,1};

    Line Loop(5) = {1,2,3,4}; Plane Surface(6) = {5};

    // Say we would like to obtain mesh elements with size lc/30 near line 1 and
    // point 5, and size lc elsewhere. To achieve this, we can use two fields:
    // "Attractor", and "Threshold". We first define an Attractor field (Field[1])
    // on points 5 and on line 1. This field returns the distance to point 5 and to
    // (100 equidistant points on) line 1.
    Field[1] = Attractor;
    Field[1].NodesList = {5};
    Field[1].NNodesByEdge = 100;
    Field[1].EdgesList = {2};

    // We then define a Threshold field, which uses the return value of the
    // Attractor Field[1] in order to define a simple change in element size around
    // the attractors (i.e., around point 5 and line 1)
    //
    // LcMax -                         /------------------
    //                               /
    //                             /
    //                           /
    // LcMin -o----------------/
    //        |                |       |
    //     Attractor       DistMin   DistMax
    Field[2] = Threshold;
    Field[2].IField = 1;
    Field[2].LcMin = lc / 30;
    Field[2].LcMax = lc;
    Field[2].DistMin = 0.15;
    Field[2].DistMax = 0.5;

    // Say we want to modulate the mesh element sizes using a mathematical function
    // of the spatial coordinates. We can do this with the MathEval field:
    Field[3] = MathEval;
    Field[3].F = "Cos(4*3.14*x) * Sin(4*3.14*y) / 10 + 0.101";

    // We could also combine MathEval with values coming from other fields. For
    // example, let's define an Attractor around point 1
    Field[4] = Attractor;
    Field[4].NodesList = {1};

    // We can then create a MathEval field with a function that depends on the
    // return value of the Attractr Field[4], i.e., depending on the distance to
    // point 1 (here using a cubic law, with minumum element size = lc / 100)
    Field[5] = MathEval;
    Field[5].F = Sprintf("F4^3 + %g", lc / 100);

    // We could also use a Box field to impose a step change in element sizes inside
    // a box
    Field[6] = Box;
    Field[6].VIn = lc / 15;
    Field[6].VOut = lc;
    Field[6].XMin = 0.3;
    Field[6].XMax = 0.6;
    Field[6].YMin = 0.3;
    Field[6].YMax = 0.6;

    // Many other types of fields are available: see the reference manual for a
    // complete list. You can also create fields directly in the graphical user
    // interface by selecting Define->Fields in the Mesh module.

    // Finally, let's use the minimum of all the fields as the background mesh field
    Field[7] = Min;
    Field[7].FieldsList = {2, 3, 5, 6};
    Background Field = 7;

    // If the boundary mesh size was too small, we could ask not to extend the
    // elements sizes from the boundary inside the domain:
    // Mesh.CharacteristicLengthExtendFromBoundary = 0;

Next: t12.geo, Previous: t10.geo, Up: Tutorial

### A.11 t11.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 11
     *
     *  Unstructured quadrangular meshes
     *
     *********************************************************************/

    // We have seen in tutorials t3 and t6 that extruded and transfinite meshes can
    // be "recombined" into quads/prisms/hexahedra by using the "Recombine"
    // keyword. Unstructured meshes can be recombined in the same way. Let's define
    // a simple geometry with an analytical mesh size field:

    Point(1) = {-1.25, -.5, 0}; Point(2) = {1.25, -.5, 0};
    Point(3) = {1.25, 1.25, 0};  Point(4) = {-1.25, 1.25, 0};

    Line(1) = {1, 2}; Line(2) = {2, 3};
    Line(3) = {3, 4}; Line(4) = {4, 1};

    Line Loop(4) = {1, 2, 3, 4}; Plane Surface(100) = {4};

    Field[1] = MathEval;
    Field[1].F = "0.01*(1.0+30.*(y-x*x)*(y-x*x) + (1-x)*(1-x))";
    Background Field = 1;

    // To generate quadrangles instead of triangles, we can simply add
    Recombine Surface{100};

    // If we'd had several surfaces, we could have used 'Recombine Surface "*";'.
    // Yet another way would be to specify the global option "Mesh.RecombineAll =
    // 1;".

    // The default recombination algorithm is called "Blossom": it uses a minimum
    // cost perfect matching algorithm to generate fully quadrilateral meshes from
    // triangulations. More details about the algorithm can be found in the
    // following paper: J.-F. Remacle, J. Lambrechts, B. Seny, E. Marchandise,
    // A. Johnen and C. Geuzaine, "Blossom-Quad: a non-uniform quadrilateral mesh
    // generator using a minimum cost perfect matching algorithm", International
    // Journal for Numerical Methods in Engineering, 2011 (in press).

    // For even better quadrilateral meshes, you can try the experimental "Delaunay
    // for quads" (DelQuad) meshing algorithm: DelQuad is a triangulation algorithm
    // that enables to create right triangles almost everywhere. Uncomment the
    // following line to try DelQuad: Mesh.Algorithm = 8;

Next: t13.geo, Previous: t11.geo, Up: Tutorial

### A.12 t12.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 12
     *
     *  Cross-patch meshing with compounds
     *
     *********************************************************************/

    // Compound geometrical entities can be defined to compute a new parametrization
    // of groups of elementary geometrical entities. This parametrization can then
    // be used for remeshing the compound as if it were a single CAD entity.

    lc = 0.1;

    Point(1) = {0, 0, 0, lc};       Point(2) = {1, 0, 0, lc};
    Point(3) = {1, 1, 0.5, lc};     Point(4) = {0, 1, 0.4, lc};
    Point(5) = {0.3, 0.2, 0, lc};   Point(6) = {0, 0.01, 0.01, lc};
    Point(7) = {0, 0.02, 0.02, lc}; Point(8) = {1, 0.05, 0.02, lc};
    Point(9) = {1, 0.32, 0.02, lc};

    Line(1) = {1, 2}; Line(2) = {2, 8}; Line(3) = {8, 9};
    Line(4) = {9, 3}; Line(5) = {3, 4}; Line(6) = {4, 7};
    Line(7) = {7, 6}; Line(8) = {6, 1}; Spline(9) = {7, 5, 9};
    Line(10) = {6, 8};

    Line Loop(11) = {5, 6, 9, 4};     Ruled Surface(12) = {11};
    Line Loop(13) = {9, -3, -10, -7}; Ruled Surface(14) = {13};
    Line Loop(15) = {10, -2, -1, -8}; Ruled Surface(16) = {15};

    // Treat lines 2, 3 and 4 as a single line
    Compound Line(100) = {2, 3, 4};
    // Idem with lines 6, 7 and 8
    Compound Line(101) = {6, 7, 8};

    // Treat surfaces 12, 14 and 16 as a single surface
    Compound Surface(200) = {12, 14, 16};

    // Add option to toggle visibility of sub-entities
    DefineConstant[ hide = {Geometry.HideCompounds, Choices{0,1},
        Name "Hide compound sub-entities", GmshOption "Geometry.HideCompounds",
        AutoCheck 0} ];

    // More details about the reparametrization technique can be found in the
    // following papers:
    //
    // * J.-F. Remacle, C. Geuzaine, G. Compère and E. Marchandise, "High-Quality
    //   Surface Remeshing Using Harmonic Maps", International Journal for Numerical
    //   Methods in Engineering, 83 (4), pp. 403-425, 2010.
    //
    // * E. Marchandise, G. Compère, M. Willemet, G. Bricteux, C. Geuzaine and J-F
    //   Remacle, "Quality meshing based on STL triangulations for biomedical
    //   simulations", International Journal for Numerical Methods in Biomedical
    //   Engineering", 26 (7), pp. 876-889, 2010.
    //
    // * E. Marchandise, C. Carton de Wiart, W. G. Vos, C. Geuzaine and
    //   J.-F. Remacle, "High Quality Surface Remeshing Using Harmonic Maps. Part
    //   II: Surfaces with High Genus and of Large Aspect Ratio", International
    //   Journal for Numerical Methods in Engineering, 86 (11), pp. 1303-1321, 2011.

Next: t14.geo, Previous: t12.geo, Up: Tutorial

### A.13 t13.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 13
     *
     *  Remeshing STL with compounds
     *
     *********************************************************************/

    // Since compound geometrical compute a new parametrization, one can also use
    // them to remesh STL files, even if in this case there's usually only a single
    // elementary geometrical entity per compound.

    // Let's merge the mesh that we would like to remesh. This mesh was reclassified
    // ("colored") from an initial STL triangulation using the "Reclassify 2D" tool
    // in Gmsh, so that we could split it along sharp geometrical features.
    Merge "t13_data.msh";

    // Since the original mesh is a bit coarse, we refine it once
    RefineMesh;

    // Create the topology of the discrete model
    CreateTopology;

    // We can now define a compound line (resp. surface) for each discrete line
    // (resp. surface) in the model
    ll[] = Line "*";
    For j In {0 : #ll[]-1}
      Compound Line(newl) = ll[j];
    EndFor
    ss[] = Surface "*";
    s = news;
    For i In {0 : #ss[]-1}
      Compound Surface(s+i) = ss[i];
    EndFor

    // And we can create the volume based on the new compound entities
    Surface Loop(1) = {s : s + #ss[]-1};
    Volume(1) = {1};

    Physical Surface(1) = {s : s + #ss[]-1};
    Physical Volume(1) = 1;

    // element size imposed by a size field
    Field[1] = MathEval;
    Field[1].F = "2.5";
    Background Field = 1;

    DefineConstant[
      funny = {0, Choices{0,1}, Name "Apply funny mesh size field?"},
      hide = {0, Choices{0,1}, Name "Hide compound sub-entities"}
    ];

    If(funny)
      Field[1].F = "2*Sin((x+y)/5) + 3";
    EndIf

    DefineConstant[  ];

    Mesh.RemeshAlgorithm = 1; // automatic
    Mesh.RemeshParametrization = 7; // conformal finite element
    Geometry.HideCompounds = hide; // hide the compound sub-entities?
    Mesh.Algorithm = 6; // Frontal

Next: t15.geo, Previous: t13.geo, Up: Tutorial

### A.14 t14.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 14
     *
     *  Homology and cohomology computation
     *
     *********************************************************************/

    // Homology computation in Gmsh finds representative chains of (relative)
    // (co)homology space bases using a mesh of a model.  The representative basis
    // chains are stored in the mesh as physical groups of Gmsh, one for each chain.

    // Create an example geometry

    m = 0.5; // mesh characteristic length
    h = 2; // height in the z-direction

    Point(1) = {0, 0, 0, m};   Point(2) = {10, 0, 0, m};
    Point(3) = {10, 10, 0, m}; Point(4) = {0, 10, 0, m};
    Point(5) = {4, 4, 0, m};   Point(6) = {6, 4, 0, m};
    Point(7) = {6, 6, 0, m};   Point(8) = {4, 6, 0, m};

    Point(9) = {2, 0, 0, m};   Point(10) = {8, 0, 0, m};
    Point(11) = {2, 10, 0, m}; Point(12) = {8, 10, 0, m};

    Line(1) = {1, 9};  Line(2) = {9, 10}; Line(3) = {10, 2};
    Line(4) = {2, 3};  Line(5) = {3, 12}; Line(6) = {12, 11};
    Line(7) = {11, 4}; Line(8) = {4, 1};  Line(9) = {5, 6};
    Line(10) = {6, 7}; Line(11) = {7, 8}; Line(12) = {8, 5};

    Line Loop(13) = {6, 7, 8, 1, 2, 3, 4, 5};
    Line Loop(14) = {11, 12, 9, 10};
    Plane Surface(15) = {13, 14};

    Extrude {0, 0, h}{ Surface{15}; }

    // Create physical groups, which are used to define the domain of the
    // (co)homology computation and the subdomain of the relative (co)homology
    // computation.

    // Whole domain
    Physical Volume(1) = {1};

    // Four "terminals" of the model
    Physical Surface(70) = {36};
    Physical Surface(71) = {44};
    Physical Surface(72) = {52};
    Physical Surface(73) = {60};

    // Whole domain surface
    bnd[] = Boundary{ Volume{1}; };
    Physical Surface(80) = bnd[];

    // Complement of the domain surface respect to the four terminals
    bnd[] -= {36, 44, 52, 60};
    Physical Surface(75) = bnd[];

    // Find bases for relative homology spaces of the domain modulo the four
    // terminals.
    Homology {{1}, {70, 71, 72, 73}};

    // Find homology space bases isomorphic to the previous bases: homology spaces
    // modulo the non-terminal domain surface, a.k.a the thin cuts.
    Homology {{1}, {75}};

    // Find cohomology space bases isomorphic to the previous bases: cohomology
    // spaces of the domain modulo the four terminals, a.k.a the thick cuts.
    Cohomology {{1}, {70, 71, 72, 73}};

    // More examples:
    //  Homology {1};
    //  Homology;
    //  Homology {{1}, {80}};
    //  Homology {{}, {80}};

Previous: t14.geo, Up: Tutorial

### A.15 t15.geo

    /*********************************************************************
     *
     *  Gmsh tutorial 15
     *
     *  Embedded points, lines and surfaces
     *
     *********************************************************************/

    // We start one again by including the first tutorial:
    Include "t1.geo";

    // We define a new point
    Point(5) = {0.02, 0.02, 0, lc/10};

    // One can force this point to be included ("embedded") in the 2D mesh, using
    // the "Point In Surface" command:
    Point{5} In Surface{6};

    // In the same way, one can force a curve to be embedded in the 2D mesh using
    // the "Line in Surface" command:
    Point(6) = {0.02, 0.12, 0, lc/5};
    Point(7) = {0.04, 0.18, 0, lc/5};
    Line(5) = {6, 7};

    Line{5} In Surface{6};

    // Finally, one can also embed a surface in a volume using the "Surface In
    // Volume" command:
    Extrude {0, 0, 0.1}{ Surface {6}; }

    p = newp;
    Point(p) = {0.02, 0.12, 0.05, lc/5};
    Point(p+1) = {0.04, 0.12, 0.05, lc/5};
    Point(p+2) = {0.04, 0.18, 0.05, lc/5};
    Point(p+3) = {0.02, 0.18, 0.05, lc/5};
    l = newl;
    Line(l) = {p, p+1};
    Line(l+1) = {p+1, p+2};
    Line(l+2) = {p+2, p+3};
    Line(l+3) = {p+3, p};
    ll = newll;
    Line Loop(ll) = {l:l+3};
    s = news;
    Plane Surface(s) = {ll};

    Surface{s} In Volume{1};

Next: Compiling the source code, Previous: Tutorial, Up: Top

## Appendix B Options

This appendix lists all the available options. Gmsh's default behavior is to save some of these options in a per-user “session resource” file (cf. “Saved in: `General.SessionFileName`” in the lists below) every time Gmsh is shut down. This permits for example to automatically remember the size and location of the windows or which fonts to use. A second set of options can be saved (automatically or manually with the `File->Save Options->As Default' menu) in a per-user “option” file (cf. “Saved in: `General.OptionsFileName`” in the lists below), automatically loaded by Gmsh every time it starts up. Finally, other options are only saved to disk manually, either by explicitely saving an option file with `File->Save As', or when saving per-model options with `File->Save Options->For Current File' (cf. “Saved in: `-`” in the lists below).

To reset all options to their default values, use the `Restore default options' button in `Tools->Options->General->Advanced', or erase the `General.SessionFileName` and `General.OptionsFileName` files by hand.

Next: Geometry options list, Previous: Options, Up: Options

### B.1 General options list

`General.AxesFormatX`
  Number format for X-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`General.AxesFormatY`
  Number format for Y-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`General.AxesFormatZ`
  Number format for Z-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`General.AxesLabelX`
  X-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`General.AxesLabelY`
  Y-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`General.AxesLabelZ`
  Z-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`General.BackgroundImageFileName`
  Background image file in JPEG, PNG or PDF format
  Default value: `""`
  Saved in: `General.OptionsFileName`
`General.DefaultFileName`
  Default project file name
  Default value: `"untitled.geo"`
  Saved in: `General.OptionsFileName`
`General.Display`
  X server to use (only for Unix versions)
  Default value: `""`
  Saved in: `-`
`General.ErrorFileName`
  File into which the log is saved if a fatal error occurs
  Default value: `".gmsh-errors"`
  Saved in: `General.OptionsFileName`
`General.ExecutableFileName`
  File name of the Gmsh executable (read-only)
  Default value: `""`
  Saved in: `General.SessionFileName`
`General.FileName`
  Current project file name (read-only)
  Default value: `""`
  Saved in: `-`
`General.FltkTheme`
  FLTK user interface theme (try e.g. plastic or gtk+)
  Default value: `""`
  Saved in: `General.SessionFileName`
`General.GraphicsFont`
  Font used in the graphic window
  Default value: `"Helvetica"`
  Saved in: `General.OptionsFileName`
`General.GraphicsFontEngine`
  Set graphics font engine (Native, Cairo)
  Default value: `"Native"`
  Saved in: `General.OptionsFileName`
`General.GraphicsFontTitle`
  Font used in the graphic window for titles
  Default value: `"Helvetica"`
  Saved in: `General.OptionsFileName`
`General.OptionsFileName`
  Option file created with `Tools->Options->Save'; automatically read on startup
  Default value: `".gmsh-options"`
  Saved in: `General.SessionFileName`
`General.RecentFile0`
  Most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile1`
  2nd most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile2`
  3rd most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile3`
  4th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile4`
  5th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile5`
  6th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile6`
  7th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile7`
  8th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile8`
  9th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.RecentFile9`
  10th most recent opened file
  Default value: `"untitled.geo"`
  Saved in: `General.SessionFileName`
`General.SessionFileName`
  Option file into which session specific information is saved; automatically read on startup
  Default value: `".gmshrc"`
  Saved in: `-`
`General.TextEditor`
  System command to launch a text editor
  Default value: `"open -t %s"`
  Saved in: `General.OptionsFileName`
`General.TmpFileName`
  Temporary file used by the geometry module
  Default value: `".gmsh-tmp"`
  Saved in: `General.SessionFileName`
`General.WatchFilePattern`
  Pattern of files to merge as they become available
  Default value: `""`
  Saved in: `-`
`General.AlphaBlending`
  Enable alpha blending (transparency) in post-processing views
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Antialiasing`
  Use multisample antialiasing (will slow down rendering)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ArrowHeadRadius`
  Relative radius of arrow head
  Default value: `0.12`
  Saved in: `General.OptionsFileName`
`General.ArrowStemLength`
  Relative length of arrow stem
  Default value: `0.56`
  Saved in: `General.OptionsFileName`
`General.ArrowStemRadius`
  Relative radius of arrow stem
  Default value: `0.02`
  Saved in: `General.OptionsFileName`
`General.Axes`
  Axes (0=none, 1=simple axes, 2=box, 3=full grid, 4=open grid, 5=ruler)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesMikado`
  Mikado axes style
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesAutoPosition`
  Position the axes automatically
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesForceValue`
  Force values on axes (otherwise use natural coordinates)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesMaxX`
  Maximum X-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesMaxY`
  Maximum Y-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesMaxZ`
  Maximum Z-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesMinX`
  Minimum X-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesMinY`
  Minimum Y-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesMinZ`
  Minimum Z-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesTicsX`
  Number of tics on the X-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`General.AxesTicsY`
  Number of tics on the Y-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`General.AxesTicsZ`
  Number of tics on the Z-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`General.AxesValueMaxX`
  Maximum X-axis forced value
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesValueMaxY`
  Maximum Y-axis forced value
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesValueMaxZ`
  Maximum Z-axis forced value
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.AxesValueMinX`
  Minimum X-axis forced value
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesValueMinY`
  Minimum Y-axis forced value
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.AxesValueMinZ`
  Minimum Z-axis forced value
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.BackgroundGradient`
  Draw background gradient (0=none, 1=vertical, 2=horizontal, 3=radial)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.BackgroundImage3D`
  Create background image in the 3D model (units = model units) or as 2D background (units = pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.BackgroundImagePage`
  Page to render in the background image (for multi-page PDFs)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.BackgroundImagePositionX`
  X position of background image (for 2D background: < 0: measure from right window edge; >= 1e5: centered)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.BackgroundImagePositionY`
  Y position of background image (for 2D background: < 0: measure from bottom window edge; >= 1e5: centered)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.BackgroundImageWidth`
  Width of background image (0: actual width if height = 0, natural scaling if not; -1: graphic window width)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`General.BackgroundImageHeight`
  Height of background image (0: actual height if width = 0, natural scaling if not; -1: graphic window height)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`General.BoundingBoxSize`
  Overall bounding box size (read-only)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Camera`
  Enable camera view mode
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.CameraAperture`
  Camera aperture in degrees
  Default value: `40`
  Saved in: `General.OptionsFileName`
`General.CameraEyeSeparationRatio`
  Eye separation ratio in % for stereo rendering
  Default value: `1.5`
  Saved in: `General.OptionsFileName`
`General.CameraFocalLengthRatio`
  Camera Focal length ratio
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Clip0A`
  First coefficient in equation for clipping plane 0 (`A' in `AX+BY+CZ+D=0')
  Default value: `1`
  Saved in: `-`
`General.Clip0B`
  Second coefficient in equation for clipping plane 0 (`B' in `AX+BY+CZ+D=0')
  Default value: `0`
  Saved in: `-`
`General.Clip0C`
  Third coefficient in equation for clipping plane 0 (`C' in `AX+BY+CZ+D=0')
  Default value: `0`
  Saved in: `-`
`General.Clip0D`
  Fourth coefficient in equation for clipping plane 0 (`D' in `AX+BY+CZ+D=0')
  Default value: `0`
  Saved in: `-`
`General.Clip1A`
  First coefficient in equation for clipping plane 1
  Default value: `0`
  Saved in: `-`
`General.Clip1B`
  Second coefficient in equation for clipping plane 1
  Default value: `1`
  Saved in: `-`
`General.Clip1C`
  Third coefficient in equation for clipping plane 1
  Default value: `0`
  Saved in: `-`
`General.Clip1D`
  Fourth coefficient in equation for clipping plane 1
  Default value: `0`
  Saved in: `-`
`General.Clip2A`
  First coefficient in equation for clipping plane 2
  Default value: `0`
  Saved in: `-`
`General.Clip2B`
  Second coefficient in equation for clipping plane 2
  Default value: `0`
  Saved in: `-`
`General.Clip2C`
  Third coefficient in equation for clipping plane 2
  Default value: `1`
  Saved in: `-`
`General.Clip2D`
  Fourth coefficient in equation for clipping plane 2
  Default value: `0`
  Saved in: `-`
`General.Clip3A`
  First coefficient in equation for clipping plane 3
  Default value: `-1`
  Saved in: `-`
`General.Clip3B`
  Second coefficient in equation for clipping plane 3
  Default value: `0`
  Saved in: `-`
`General.Clip3C`
  Third coefficient in equation for clipping plane 3
  Default value: `0`
  Saved in: `-`
`General.Clip3D`
  Fourth coefficient in equation for clipping plane 3
  Default value: `1`
  Saved in: `-`
`General.Clip4A`
  First coefficient in equation for clipping plane 4
  Default value: `0`
  Saved in: `-`
`General.Clip4B`
  Second coefficient in equation for clipping plane 4
  Default value: `-1`
  Saved in: `-`
`General.Clip4C`
  Third coefficient in equation for clipping plane 4
  Default value: `0`
  Saved in: `-`
`General.Clip4D`
  Fourth coefficient in equation for clipping plane 4
  Default value: `1`
  Saved in: `-`
`General.Clip5A`
  First coefficient in equation for clipping plane 5
  Default value: `0`
  Saved in: `-`
`General.Clip5B`
  Second coefficient in equation for clipping plane 5
  Default value: `0`
  Saved in: `-`
`General.Clip5C`
  Third coefficient in equation for clipping plane 5
  Default value: `-1`
  Saved in: `-`
`General.Clip5D`
  Fourth coefficient in equation for clipping plane 5
  Default value: `1`
  Saved in: `-`
`General.ClipFactor`
  Near and far clipping plane distance factor (decrease value for better z-buffer resolution)
  Default value: `5`
  Saved in: `-`
`General.ClipOnlyDrawIntersectingVolume`
  Only draw layer of elements that intersect the clipping plane
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ClipOnlyVolume`
  Only clip volume elements
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ClipPositionX`
  Horizontal position (in pixels) of the upper left corner of the clipping planes window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.ClipPositionY`
  Vertical position (in pixels) of the upper left corner of the clipping planes window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.ClipWholeElements`
  Clip whole elements
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ColorScheme`
  Default color scheme for graphics (0=dark, 1=light, 2=grayscale, 3=reverse)
  Default value: `1`
  Saved in: `General.SessionFileName`
`General.ConfirmOverwrite`
  Ask confirmation before overwriting files?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.ContextPositionX`
  Horizontal position (in pixels) of the upper left corner of the contextual windows
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.ContextPositionY`
  Vertical position (in pixels) of the upper left corner of the contextual windows
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.DetachedMenu`
  Should the menu window be detached from the graphic window?
  Default value: `0`
  Saved in: `General.SessionFileName`
`General.DisplayBorderFactor`
  Border factor for model display (0: model fits window size exactly)
  Default value: `0.2`
  Saved in: `General.OptionsFileName`
`General.DoubleBuffer`
  Use a double buffered graphic window (on Unix, should be set to 0 when working on a remote host without GLX)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.DrawBoundingBoxes`
  Draw bounding boxes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ExpertMode`
  Enable expert mode (to disable all the messages meant for inexperienced users)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.ExtraPositionX`
  Horizontal position (in pixels) of the upper left corner of the generic extra window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.ExtraPositionY`
  Vertical position (in pixels) of the upper left corner of the generic extra window
  Default value: `350`
  Saved in: `General.SessionFileName`
`General.ExtraHeight`
  Height (in pixels) of the generic extra window
  Default value: `100`
  Saved in: `General.SessionFileName`
`General.ExtraWidth`
  Width (in pixels) of the generic extra window
  Default value: `100`
  Saved in: `General.SessionFileName`
`General.FastRedraw`
  Draw simplified model while rotating, panning and zooming
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.FieldPositionX`
  Horizontal position (in pixels) of the upper left corner of the field window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.FieldPositionY`
  Vertical position (in pixels) of the upper left corner of the field window
  Default value: `550`
  Saved in: `General.SessionFileName`
`General.FieldHeight`
  Height (in pixels) of the field window
  Default value: `320`
  Saved in: `General.SessionFileName`
`General.FieldWidth`
  Width (in pixels) of the field window
  Default value: `420`
  Saved in: `General.SessionFileName`
`General.FileChooserPositionX`
  Horizontal position (in pixels) of the upper left corner of the file chooser windows
  Default value: `200`
  Saved in: `General.SessionFileName`
`General.FileChooserPositionY`
  Vertical position (in pixels) of the upper left corner of the file chooser windows
  Default value: `200`
  Saved in: `General.SessionFileName`
`General.FltkColorScheme`
  FLTK user interface color theme (0: standard, 1:dark)
  Default value: `0`
  Saved in: `General.SessionFileName`
`General.FontSize`
  Size of the font in the user interface (-1=automatic)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`General.GraphicsFontSize`
  Size of the font in the graphic window
  Default value: `15`
  Saved in: `General.OptionsFileName`
`General.GraphicsFontSizeTitle`
  Size of the font in the graphic window for titles
  Default value: `18`
  Saved in: `General.OptionsFileName`
`General.GraphicsHeight`
  Height (in pixels) of the graphic window
  Default value: `600`
  Saved in: `General.SessionFileName`
`General.GraphicsPositionX`
  Horizontal position (in pixels) of the upper left corner of the graphic window
  Default value: `50`
  Saved in: `General.SessionFileName`
`General.GraphicsPositionY`
  Vertical position (in pixels) of the upper left corner of the graphic window
  Default value: `50`
  Saved in: `General.SessionFileName`
`General.GraphicsWidth`
  Width (in pixels) of the graphic window
  Default value: `800`
  Saved in: `General.SessionFileName`
`General.HighOrderToolsPositionX`
  Horizontal position (in pixels) of the upper left corner of the high order tools window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.HighOrderToolsPositionY`
  Vertical position (in pixels) of the upper left corner of the high order tools window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.HighResolutionGraphics`
  Use high-resolution OpenGL graphics (e.g. for Macs with retina displays)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.HighResolutionPointSizeFactor`
  Point size factor when using high-resolution OpenGL graphics
  Default value: `2`
  Saved in: `General.OptionsFileName`
`General.InitialModule`
  Module launched on startup (0=automatic, 1=geometry, 2=mesh, 3=solver, 4=post-processing)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light0`
  Enable light source 0
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light0X`
  X position of light source 0
  Default value: `0.65`
  Saved in: `General.OptionsFileName`
`General.Light0Y`
  Y position of light source 0
  Default value: `0.65`
  Saved in: `General.OptionsFileName`
`General.Light0Z`
  Z position of light source 0
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light0W`
  Divisor of the X, Y and Z coordinates of light source 0 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light1`
  Enable light source 1
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light1X`
  X position of light source 1
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.Light1Y`
  Y position of light source 1
  Default value: `0.3`
  Saved in: `General.OptionsFileName`
`General.Light1Z`
  Z position of light source 1
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light1W`
  Divisor of the X, Y and Z coordinates of light source 1 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light2`
  Enable light source 2
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light2X`
  X position of light source 2
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.Light2Y`
  Y position of light source 2
  Default value: `0.3`
  Saved in: `General.OptionsFileName`
`General.Light2Z`
  Z position of light source 2
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light2W`
  Divisor of the X, Y and Z coordinates of light source 2 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light3`
  Enable light source 3
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light3X`
  X position of light source 3
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.Light3Y`
  Y position of light source 3
  Default value: `0.3`
  Saved in: `General.OptionsFileName`
`General.Light3Z`
  Z position of light source 3
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light3W`
  Divisor of the X, Y and Z coordinates of light source 3 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light4`
  Enable light source 4
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light4X`
  X position of light source 4
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.Light4Y`
  Y position of light source 4
  Default value: `0.3`
  Saved in: `General.OptionsFileName`
`General.Light4Z`
  Z position of light source 4
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light4W`
  Divisor of the X, Y and Z coordinates of light source 4 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light5`
  Enable light source 5
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Light5X`
  X position of light source 5
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.Light5Y`
  Y position of light source 5
  Default value: `0.3`
  Saved in: `General.OptionsFileName`
`General.Light5Z`
  Z position of light source 5
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Light5W`
  Divisor of the X, Y and Z coordinates of light source 5 (W=0 means infinitely far source)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.LineWidth`
  Display width of lines (in pixels)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.ManipulatorPositionX`
  Horizontal position (in pixels) of the upper left corner of the manipulator window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.ManipulatorPositionY`
  Vertical position (in pixels) of the upper left corner of the manipulator window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.MaxX`
  Maximum model coordinate along the X-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MaxY`
  Maximum model coordinate along the Y-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MaxZ`
  Maximum model coordinate along the Z-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MenuWidth`
  Width (in pixels) of the menu tree
  Default value: `200`
  Saved in: `General.SessionFileName`
`General.MenuHeight`
  Height (in pixels) of the (detached) menu tree
  Default value: `200`
  Saved in: `General.SessionFileName`
`General.MenuPositionX`
  Horizontal position (in pixels) of the (detached) menu tree
  Default value: `400`
  Saved in: `General.SessionFileName`
`General.MenuPositionY`
  Vertical position (in pixels) of the (detached) menu tree
  Default value: `400`
  Saved in: `General.SessionFileName`
`General.MessageFontSize`
  Size of the font in the message window (-1=automatic)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`General.MessageHeight`
  Height (in pixels) of the message console when it is visible (should be > 0)
  Default value: `300`
  Saved in: `General.SessionFileName`
`General.MinX`
  Minimum model coordinate along the X-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MinY`
  Minimum model coordinate along the Y-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MinZ`
  Minimum model coordinate along the Z-axis (read-only)
  Default value: `0`
  Saved in: `-`
`General.MouseHoverMeshes`
  Enable mouse hover on meshes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.MouseSelection`
  Enable mouse selection
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.NonModalWindows`
  Force all control windows to be on top of the graphic window ("non-modal")
  Default value: `1`
  Saved in: `General.SessionFileName`
`General.NoPopup`
  Disable interactive dialog windows in scripts (and use default values instead)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.OptionsPositionX`
  Horizontal position (in pixels) of the upper left corner of the option window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.OptionsPositionY`
  Vertical position (in pixels) of the upper left corner of the option window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.Orthographic`
  Orthographic projection mode (0=perspective projection)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.PluginPositionX`
  Horizontal position (in pixels) of the upper left corner of the plugin window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.PluginPositionY`
  Vertical position (in pixels) of the upper left corner of the plugin window
  Default value: `550`
  Saved in: `General.SessionFileName`
`General.PluginHeight`
  Height (in pixels) of the plugin window
  Default value: `320`
  Saved in: `General.SessionFileName`
`General.PluginWidth`
  Width (in pixels) of the plugin window
  Default value: `420`
  Saved in: `General.SessionFileName`
`General.PointSize`
  Display size of points (in pixels)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`General.PolygonOffsetAlwaysOn`
  Always apply polygon offset, instead of trying to detect when it is required
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.PolygonOffsetFactor`
  Polygon offset factor (offset = factor * DZ + r * units)
  Default value: `0.5`
  Saved in: `General.OptionsFileName`
`General.PolygonOffsetUnits`
  Polygon offset units (offset = factor * DZ + r * units)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.ProgressMeterStep`
  Increment (in percent) of the progress meter bar
  Default value: `20`
  Saved in: `General.OptionsFileName`
`General.QuadricSubdivisions`
  Number of subdivisions used to draw points or lines as spheres or cylinders
  Default value: `6`
  Saved in: `General.OptionsFileName`
`General.RotationX`
  First Euler angle (used if Trackball=0)
  Default value: `0`
  Saved in: `-`
`General.RotationY`
  Second Euler angle (used if Trackball=0)
  Default value: `0`
  Saved in: `-`
`General.RotationZ`
  Third Euler angle (used if Trackball=0)
  Default value: `0`
  Saved in: `-`
`General.RotationCenterGravity`
  Rotate around the (pseudo) center of mass instead of (RotationCenterX, RotationCenterY, RotationCenterZ)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.RotationCenterX`
  X coordinate of the center of rotation
  Default value: `0`
  Saved in: `-`
`General.RotationCenterY`
  Y coordinate of the center of rotation
  Default value: `0`
  Saved in: `-`
`General.RotationCenterZ`
  Z coordinate of the center of rotation
  Default value: `0`
  Saved in: `-`
`General.SaveOptions`
  Automatically save current options in General.OptionsFileName (1) or per model (2)each time you quit Gmsh?
  Default value: `0`
  Saved in: `General.SessionFileName`
`General.SaveSession`
  Automatically save session specific information in General.SessionFileName each time you quit Gmsh?
  Default value: `1`
  Saved in: `General.SessionFileName`
`General.ScaleX`
  X-axis scale factor
  Default value: `1`
  Saved in: `-`
`General.ScaleY`
  Y-axis scale factor
  Default value: `1`
  Saved in: `-`
`General.ScaleZ`
  Z-axis scale factor
  Default value: `1`
  Saved in: `-`
`General.Shininess`
  Material shininess
  Default value: `0.4`
  Saved in: `General.OptionsFileName`
`General.ShininessExponent`
  Material shininess exponent (between 0 and 128)
  Default value: `40`
  Saved in: `General.OptionsFileName`
`General.SmallAxes`
  Display the small axes
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.SmallAxesPositionX`
  X position (in pixels) of small axes (< 0: measure from right window edge; >= 1e5: centered)
  Default value: `-60`
  Saved in: `General.OptionsFileName`
`General.SmallAxesPositionY`
  Y position (in pixels) of small axes (< 0: measure from bottom window edge; >= 1e5: centered)
  Default value: `-40`
  Saved in: `General.OptionsFileName`
`General.SmallAxesSize`
  Size (in pixels) of small axes
  Default value: `30`
  Saved in: `General.OptionsFileName`
`General.StatisticsPositionX`
  Horizontal position (in pixels) of the upper left corner of the statistic window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.StatisticsPositionY`
  Vertical position (in pixels) of the upper left corner of the statistic window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.Stereo`
  Use stereo rendering
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.SystemMenuBar`
  Use the system menu bar on Mac OS X?
  Default value: `1`
  Saved in: `General.SessionFileName`
`General.Terminal`
  Should information be printed on the terminal (if available)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`General.Tooltips`
  Show tooltips in the user interface
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.Trackball`
  Use trackball rotation mode
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.TrackballHyperbolicSheet`
  Use hyperbolic sheet away from trackball center for z-rotations
  Default value: `1`
  Saved in: `General.OptionsFileName`
`General.TrackballQuaternion0`
  First trackball quaternion component (used if General.Trackball=1)
  Default value: `0`
  Saved in: `-`
`General.TrackballQuaternion1`
  Second trackball quaternion component (used if General.Trackball=1)
  Default value: `0`
  Saved in: `-`
`General.TrackballQuaternion2`
  Third trackball quaternion component (used if General.Trackball=1)
  Default value: `0`
  Saved in: `-`
`General.TrackballQuaternion3`
  Fourth trackball quaternion component (used if General.Trackball=1)
  Default value: `1`
  Saved in: `-`
`General.TranslationX`
  X-axis translation (in model units)
  Default value: `0`
  Saved in: `-`
`General.TranslationY`
  Y-axis translation (in model units)
  Default value: `0`
  Saved in: `-`
`General.TranslationZ`
  Z-axis translation (in model units)
  Default value: `0`
  Saved in: `-`
`General.VectorType`
  Default vector display type (for normals, etc.)
  Default value: `4`
  Saved in: `General.OptionsFileName`
`General.Verbosity`
  Level of information printed during processing (0=no information)
  Default value: `5`
  Saved in: `General.OptionsFileName`
`General.VisibilityPositionX`
  Horizontal position (in pixels) of the upper left corner of the visibility window
  Default value: `650`
  Saved in: `General.SessionFileName`
`General.VisibilityPositionY`
  Vertical position (in pixels) of the upper left corner of the visibility window
  Default value: `150`
  Saved in: `General.SessionFileName`
`General.ZoomFactor`
  Middle mouse button zoom acceleration factor
  Default value: `4`
  Saved in: `General.OptionsFileName`
`General.Color.Background`
  Background color
  Default value: `{255,255,255}`
  Saved in: `General.OptionsFileName`
`General.Color.BackgroundGradient`
  Background gradient color
  Default value: `{208,215,255}`
  Saved in: `General.OptionsFileName`
`General.Color.Foreground`
  Foreground color
  Default value: `{85,85,85}`
  Saved in: `General.OptionsFileName`
`General.Color.Text`
  Text color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`General.Color.Axes`
  Axes color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`General.Color.SmallAxes`
  Small axes color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`General.Color.AmbientLight`
  Ambient light color
  Default value: `{25,25,25}`
  Saved in: `General.OptionsFileName`
`General.Color.DiffuseLight`
  Diffuse light color
  Default value: `{255,255,255}`
  Saved in: `General.OptionsFileName`
`General.Color.SpecularLight`
  Specular light color
  Default value: `{255,255,255}`
  Saved in: `General.OptionsFileName`

`Print.ParameterCommand`
  Command parsed when the print parameter is changed
  Default value: `"Mesh.Clip=1; View.Clip=1; General.ClipWholeElements=1; General.Clip0D=Print.Parameter; SetChanged;"`
  Saved in: `General.OptionsFileName`
`Print.Parameter`
  Current value of the print parameter
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.ParameterFirst`
  First value of print parameter in loop
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`Print.ParameterLast`
  Last value of print parameter in loop
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.ParameterSteps`
  Number of steps in loop over print parameter
  Default value: `10`
  Saved in: `General.OptionsFileName`
`Print.Background`
  Print background (gradient and image)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.CompositeWindows`
  Composite all window tiles in the same output image (for bitmap output only)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PgfTwoDim`
  Output PGF format for two dimensions. Mostly irrelevant if `PgfExportAxis=0`. Default `1` (yes).
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.PgfExportAxis`
  Include axis in export pgf code (not in the png). Default `0` (no).
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PgfHorizontalBar`
  Use a horizontal color bar in the pgf output. Default `0` (no).
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.DeleteTemporaryFiles`
  Delete temporary files used during printing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.EpsBestRoot`
  Try to minimize primitive splitting in BSP tree sorted PostScript/PDF output
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.EpsCompress`
  Compress PostScript/PDF output using zlib
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.EpsLineWidthFactor`
  Width factor for lines in PostScript/PDF output
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.EpsOcclusionCulling`
  Cull occluded primitives (to reduce PostScript/PDF file size)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.EpsPointSizeFactor`
  Size factor for points in PostScript/PDF output
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.EpsPS3Shading`
  Enable PostScript Level 3 shading
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.EpsQuality`
  PostScript/PDF quality (0=bitmap, 1=vector (simple sort), 2=vector (accurate sort), 3=vector (unsorted)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.Format`
  File format (10=automatic)
  Default value: `10`
  Saved in: `General.OptionsFileName`
`Print.GeoLabels`
  Save labels in unrolled Gmsh geometries
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.GeoOnlyPhysicals`
  Only save entities that belong to physical groups
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.GifDither`
  Apply dithering to GIF output
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.GifInterlace`
  Interlace GIF output
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.GifSort`
  Sort the colormap in GIF output
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.GifTransparent`
  Output transparent GIF image
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.Height`
  Height of printed image; use (possibly scaled) current height if < 0
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`Print.JpegQuality`
  JPEG quality (between 1 and 100)
  Default value: `100`
  Saved in: `General.OptionsFileName`
`Print.JpegSmoothing`
  JPEG smoothing (between 0 and 100)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PostElementary`
  Save elementary region tags in mesh statistics exported as post-processing views
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.PostElement`
  Save element numbers in mesh statistics exported as post-processing views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PostGamma`
  Save Gamma quality measure in mesh statistics exported as post-processing views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PostEta`
  Save Eta quality measure in mesh statistics exported as post-processing views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PostRho`
  Save Rho quality measure in mesh statistics exported as post-processing views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.PostDisto`
  Save Disto quality measure in mesh statistics exported as post-processing views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.TexAsEquation`
  Print all TeX strings as equations
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Print.Text`
  Print text strings?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Print.Width`
  Width of printed image; use (possibly scaled) current width if < 0)
  Default value: `-1`
  Saved in: `General.OptionsFileName`

Next: Mesh options list, Previous: General options list, Up: Options

### B.2 Geometry options list

`Geometry.DoubleClickedPointCommand`
  Command parsed when double-clicking on a point
  Default value: `""`
  Saved in: `General.OptionsFileName`
`Geometry.DoubleClickedLineCommand`
  Command parsed when double-clicking on a line
  Default value: `""`
  Saved in: `General.OptionsFileName`
`Geometry.DoubleClickedSurfaceCommand`
  Command parsed when double-clicking on a surface
  Default value: `""`
  Saved in: `General.OptionsFileName`
`Geometry.DoubleClickedVolumeCommand`
  Command parsed when double-clicking on a volume
  Default value: `""`
  Saved in: `General.OptionsFileName`
`Geometry.AutoCoherence`
  Should all duplicate entities be automatically removed? (If AutoCoherence == 2, also remove degenerate entities)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.Clip`
  Enable clipping planes? (Plane[i]=2^i, i=0,...,5)
  Default value: `0`
  Saved in: `-`
`Geometry.CopyMeshingMethod`
  Copy meshing method (unstructured or transfinite) when duplicating geometrical entities?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.CopyDisplayAttributes`
  Copy display attributes (visibiliy, color) when duplicating geometrical entities?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.DoubleClickedEntityTag`
  Tag of last double-clicked geometrical entity
  Default value: `0`
  Saved in: `-`
`Geometry.ExactExtrusion`
  Use exact extrusion formula in interpolations (set to 0 to allow geometrical transformations of extruded entities)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.ExtrudeReturnLateralEntities`
  Add lateral entities in lists returned by extrusion commands?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.ExtrudeSplinePoints`
  Number of control points for splines created during extrusion
  Default value: `5`
  Saved in: `General.OptionsFileName`
`Geometry.HideCompounds`
  Hide entities that make up compound entities?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.HighlightOrphans`
  Highlight orphan entities (lines connected to a single surface, etc.)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.LabelType`
  Type of entity label (1=elementary number, 2=physical number)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.Light`
  Enable lighting for the geometry
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.LightTwoSide`
  Light both sides of surfaces (leads to slower rendering)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.Lines`
  Display geometry curves?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.LineNumbers`
  Display curve numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.LineSelectWidth`
  Display width of selected lines (in pixels)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Geometry.LineType`
  Display lines as solid color segments (0), 3D cylinders (1) or tapered cylinders (2)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.LineWidth`
  Display width of lines (in pixels)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Geometry.MatchGeomAndMesh`
  Matches geometries and meshes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.Normals`
  Display size of normal vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.NumSubEdges`
  Number of edge subdivisions between control points when displaying curves
  Default value: `20`
  Saved in: `General.OptionsFileName`
`Geometry.OCCFixDegenerated`
  Fix degenerated edges/faces in STEP, IGES and BRep models
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OCCFixSmallEdges`
  Fix small edges in STEP, IGES and BRep models
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OCCFixSmallFaces`
  Fix small faces in STEP, IGES and BRep models
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OCCSewFaces`
  Sew faces in STEP, IGES and BRep models
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OCCConnectFaces`
  Cut and connect faces in STEP, IGES and BRep models (0=no, 1=internal, 2=Salome)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OCCScaling`
  Scale STEP, IGES and BRep model by given factor
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.OffsetX`
  Model display offset along X-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`Geometry.OffsetY`
  Model display offset along Y-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`Geometry.OffsetZ`
  Model display offset along Z-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`Geometry.OldCircle`
  Use old circle description (compatibility option for old Gmsh geometries)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OldRuledSurface`
  Use old 3-sided ruled surface interpolation (compatibility option for old Gmsh geometries)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.OldNewReg`
  Use old newreg definition for geometrical transformations (compatibility option for old Gmsh geometries)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.Points`
  Display geometry points?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.PointNumbers`
  Display points numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.PointSelectSize`
  Display size of selected points (in pixels)
  Default value: `5`
  Saved in: `General.OptionsFileName`
`Geometry.PointSize`
  Display size of points (in pixels)
  Default value: `4`
  Saved in: `General.OptionsFileName`
`Geometry.PointType`
  Display points as solid color dots (0) or 3D spheres (1)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.ScalingFactor`
  Global geometry scaling factor
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.OrientedPhysicals`
  Use sign of elementary entity in physical definition as orientation indicator
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Geometry.SnapX`
  Snapping grid spacing along the X-axis
  Default value: `0.1`
  Saved in: `General.OptionsFileName`
`Geometry.SnapY`
  Snapping grid spacing along the Y-axis
  Default value: `0.1`
  Saved in: `General.OptionsFileName`
`Geometry.SnapZ`
  Snapping grid spacing along the Z-axis
  Default value: `0.1`
  Saved in: `General.OptionsFileName`
`Geometry.Surfaces`
  Display geometry surfaces?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.SurfaceNumbers`
  Display surface numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.SurfaceType`
  Surface display type (0=cross, 1=wireframe, 2=solid)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Geometry.Tangents`
  Display size of tangent vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.Tolerance`
  Geometrical tolerance
  Default value: `1e-06`
  Saved in: `General.OptionsFileName`
`Geometry.Transform`
  Transform model display coordinates (0=no, 1=scale)
  Default value: `0`
  Saved in: `-`
`Geometry.TransformXX`
  Element (1,1) of the 3x3 model display transformation matrix
  Default value: `1`
  Saved in: `-`
`Geometry.TransformXY`
  Element (1,2) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformXZ`
  Element (1,3) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformYX`
  Element (2,1) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformYY`
  Element (2,2) of the 3x3 model display transformation matrix
  Default value: `1`
  Saved in: `-`
`Geometry.TransformYZ`
  Element (2,3) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformZX`
  Element (3,1) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformZY`
  Element (3,2) of the 3x3 model display transformation matrix
  Default value: `0`
  Saved in: `-`
`Geometry.TransformZZ`
  Element (3,3) of the 3x3 model display transformation matrix
  Default value: `1`
  Saved in: `-`
`Geometry.Volumes`
  Display geometry volumes? (not implemented yet)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.VolumeNumbers`
  Display volume numbers? (not implemented yet)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Points`
  Normal geometry point color
  Default value: `{90,90,90}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Lines`
  Normal geometry curve color
  Default value: `{0,0,255}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Surfaces`
  Normal geometry surface color
  Default value: `{128,128,128}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Volumes`
  Normal geometry volume color
  Default value: `{255,255,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Selection`
  Selected geometry color
  Default value: `{255,0,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.HighlightZero`
  Highlight 0 color
  Default value: `{255,0,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.HighlightOne`
  Highlight 1 color
  Default value: `{255,150,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.HighlightTwo`
  Highlight 2 color
  Default value: `{255,255,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Tangents`
  Tangent geometry vectors color
  Default value: `{255,255,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Normals`
  Normal geometry vectors color
  Default value: `{255,0,0}`
  Saved in: `General.OptionsFileName`
`Geometry.Color.Projection`
  Projection surface color
  Default value: `{0,255,0}`
  Saved in: `General.OptionsFileName`

Next: Solver options list, Previous: Geometry options list, Up: Options

### B.3 Mesh options list

`Mesh.Algorithm`
  2D mesh algorithm (1=MeshAdapt, 2=Automatic, 5=Delaunay, 6=Frontal, 7=bamg, 8=delquad)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Mesh.Algorithm3D`
  3D mesh algorithm (1=Delaunay, 4=Frontal, 5=Frontal Delaunay, 6=Frontal Hex, 7=MMG3D, 9=R-tree)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.AngleSmoothNormals`
  Threshold angle below which normals are not smoothed
  Default value: `30`
  Saved in: `General.OptionsFileName`
`Mesh.AnisoMax`
  Maximum anisotropy of the mesh
  Default value: `1e+33`
  Saved in: `General.OptionsFileName`
`Mesh.AllowSwapAngle`
  Threshold angle (in degrees) between faces normals under which we allow an edge swap
  Default value: `10`
  Saved in: `General.OptionsFileName`
`Mesh.BdfFieldFormat`
  Field format for Nastran BDF files (0=free, 1=small, 2=large)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Binary`
  Write mesh files in binary format (if possible)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Bunin`
  Apply Bunin optimization on quad meshes (the parameter is the maximal size of a cavity that may be remeshed)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Lloyd`
  Apply lloyd optimization on surface meshes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SmoothCrossField`
  Apply n barycentric smoothing passes to the cross field
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.CgnsImportOrder`
  Enable the creation of high-order mesh from CGNS structured meshes(1, 2, 4, 8, ...)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoArchitecture`
  (Adv. Chaco): Parallel architecture topology (0=hypercube, 1-3=mesh dimensions)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoEigensolver`
  (Adv. Chaco): Type of eigensolver for a spectral algorithm (0=Lanczos, 1=Multilevel RQI/Symmlq)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoEigTol`
  (Adv. Chaco): Tolerance of the eigensolver for spectral or multilevel-KL algorithms
  Default value: `0.001`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoGlobalMethod`
  Chaco partitioning algorithm (1=Multilevel-KL, 2=Spectral, 4=Linear, 5=Random, 6=Scattered)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoHypercubeDim`
  (Adv. Chaco): Dimensional partitioning for a hypercube topology
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoLocalMethod`
  (Adv. Chaco): Local partitioning algorithm
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoMeshDim1`
  (Adv. Chaco): Number of partitions in the first dimension of a mesh topology
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoMeshDim2`
  (Adv. Chaco): Number of partitions in the second dimension of a mesh topology
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoMeshDim3`
  (Adv. Chaco): Number of partitions in the third dimension of a mesh topology
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoPartitionSection`
  (Adv. Chaco): Partition by (1=bisection, 2=quadrisection, 3=octasection
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoSeed`
  (Adv. Chaco): Seed for random number generator
  Default value: `7.65432e+06`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoVMax`
  (Adv. Chaco): Maximum vertices in a coarse graph (for multilevel-KL algorithm and Multilevel RQI/Symmlq eigensolver)
  Default value: `250`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoParamINTERNAL_VERTICES`
  (Adv. Chaco): Parameter INTERNAL_VERTICES
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoParamREFINE_MAP`
  (Adv. Chaco): Parameter REFINE_MAP
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoParamREFINE_PARTITION`
  (Adv. Chaco): Parameter REFINE_PARTITION
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ChacoParamTERMINAL_PROPOGATION`
  (Adv. Chaco): Parameter TERMINAL_PROPOGATION
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthExtendFromBoundary`
  Extend computation of mesh element sizes from the boundaries into the surfaces/volumes
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthFactor`
  Factor applied to all mesh element sizes
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthMin`
  Minimum mesh element size
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthMax`
  Maximum mesh element size
  Default value: `1e+22`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthFromCurvature`
  Automatically compute mesh element sizes from curvature (experimental)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.CharacteristicLengthFromPoints`
  Compute mesh element sizes from values given at geometry points
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Clip`
  Enable clipping planes? (Plane[i]=2^i, i=0,...,5)
  Default value: `0`
  Saved in: `-`
`Mesh.ColorCarousel`
  Mesh coloring (0=by element type, 1=by elementary entity, 2=by physical entity, 3=by partition)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.CpuTime`
  CPU time (in seconds) for the generation of the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.DrawSkinOnly`
  Draw only the skin of 3D meshes?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Dual`
  Display the dual mesh obtained by barycentric subdivision
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ElementOrder`
  Element order (1=linear elements, N (<6) = elements of higher order)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Explode`
  Element shrinking factor (between 0 and 1)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.FlexibleTransfinite`
  Allow transfinite contraints to be modified for Blossom or by global mesh size factor
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.NewtonConvergenceTestXYZ`
  Force inverse surface mapping algorithm (Newton-Raphson) to converge in real coordinates (experimental)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Format`
  Mesh output format (1=msh, 2=unv, 10=automatic, 19=vrml, 27=stl, 30=mesh, 31=bdf, 32=cgns, 33=med, 40=ply2)
  Default value: `10`
  Saved in: `General.OptionsFileName`
`Mesh.Hexahedra`
  Display mesh hexahedra?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.HighOrderNumLayers`
  Number of high order mesh elements to consider for optimization
  Default value: `6`
  Saved in: `-`
`Mesh.HighOrderOptimize`
  Optimize high order meshes?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.HighOrderPoissonRatio`
  Poisson ratio of the material used in the elastic smoother for high order meshesMust be between -1.0 and 0.5, excluded
  Default value: `0.33`
  Saved in: `-`
`Mesh.HighOrderThresholdMin`
  Minimum threshold for high order element optimization
  Default value: `0.1`
  Saved in: `General.OptionsFileName`
`Mesh.HighOrderThresholdMax`
  Maximum threshold for high order element optimization
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Mesh.HighOrderOptPrimSurfMesh`
  Try to fix flipped surface mesh elements in high-order optimizer
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.LabelSampling`
  Label sampling rate (display one label every `LabelSampling' elements)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.LabelType`
  Type of element label (0=element number, 1=elementary entity number, 2=physical entity number, 3=partition number, 4=coordinates)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.LcIntegrationPrecision`
  Accuracy of evaluation of the LC field for 1D mesh generation
  Default value: `1e-09`
  Saved in: `General.OptionsFileName`
`Mesh.Light`
  Enable lighting for the mesh
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.LightLines`
  Enable lighting for mesh lines (element edges)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.LightTwoSide`
  Light both sides of surfaces (leads to slower rendering)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Lines`
  Display mesh lines (1D elements)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.LineNumbers`
  Display mesh line numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.LineWidth`
  Display width of mesh lines (in pixels)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.MeshOnlyVisible`
  Mesh only visible entities (experimental: use with caution!)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.MetisAlgorithm`
  METIS partitioning algorithm (1=Recursive, 2=K-way, 3=Nodal weight)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.MetisEdgeMatching`
  (Adv. METIS): Determines the matching type (1=Random, 2=Heavy-Edge, 3=Sorted Heavy-Edge)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`Mesh.MetisRefinementAlgorithm`
  (Adv. METIS): Algorithm for k-way refinement (1=Random, 2=Greedy, 3=Random with minimized connectivity)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`Mesh.MinimumCirclePoints`
  Minimum number of points used to mesh a circle
  Default value: `7`
  Saved in: `General.OptionsFileName`
`Mesh.MinimumCurvePoints`
  Minimum number of points used to mesh a (non-straight) curve
  Default value: `3`
  Saved in: `General.OptionsFileName`
`Mesh.MshFileVersion`
  Version of the MSH file format to use
  Default value: `2.2`
  Saved in: `General.OptionsFileName`
`Mesh.MshFilePartitioned`
  Split MSH file by mesh partition (0: no, 1: yes, 2: create physicals by partition)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionHexWeight`
  Weight of hexahedral element for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionPrismWeight`
  Weight of prismatic element (wedge) for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionPyramidWeight`
  Weight of pyramidal element for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionQuadWeight`
  Weight of quadrangle for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionTetWeight`
  Weight of tetrahedral element for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.PartitionTriWeight`
  Weight of triangle for METIS load balancing
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.NbHexahedra`
  Number of hexahedra in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbNodes`
  Number of nodes in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbPartitions`
  Number of partitions
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.NbPrisms`
  Number of prisms in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbPyramids`
  Number of pyramids in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbQuadrangles`
  Number of quadrangles in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbTetrahedra`
  Number of tetrahedra in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.NbTriangles`
  Number of triangles in the current mesh (read-only)
  Default value: `0`
  Saved in: `-`
`Mesh.Normals`
  Display size of normal vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.NumSubEdges`
  Number of edge subdivisions when displaying high order elements
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Mesh.Optimize`
  Optimize the mesh to improve the quality of tetrahedral elements
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.OptimizeNetgen`
  Optimize the mesh using Netgen to improve the quality of tetrahedral elements
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Partitioner`
  Partitioner software (1=Chacho, 2=METIS)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Mesh.Points`
  Display mesh vertices (nodes)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.PointNumbers`
  Display mesh node numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.PointSize`
  Display size of mesh vertices (in pixels)
  Default value: `4`
  Saved in: `General.OptionsFileName`
`Mesh.PointType`
  Display mesh vertices as solid color dots (0) or 3D spheres (1)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Prisms`
  Display mesh prisms?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Pyramids`
  Display mesh pyramids?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.Quadrangles`
  Display mesh quadrangles?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.QualityInf`
  Only display elements whose quality measure is greater than QualityInf
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.QualitySup`
  Only display elements whose quality measure is smaller than QualitySup
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.QualityType`
  Type of quality measure (0=gamma~vol/sum_face/max_edge, 1=eta~vol^(2/3)/sum_edge^2, 2=rho~min_edge/max_edge)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Mesh.RadiusInf`
  Only display elements whose longest edge is greater than RadiusInf
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RadiusSup`
  Only display elements whose longest edge is smaller than RadiusSup
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RandomFactor`
  Random factor used in the 2D meshing algorithm (should be increased if RandomFactor * size(triangle)/size(model) approaches machine accuracy)
  Default value: `1e-09`
  Saved in: `General.OptionsFileName`
`Mesh.IgnorePartitionBoundary`
  Ignore partitions boundaries (0=no, 1=yes)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RecombinationAlgorithm`
  Mesh recombination algorithm (0=standard, 1=blossom)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.RecombineAll`
  Apply recombination algorithm to all surfaces, ignoring per-surface spec
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Recombine3DAll`
  Apply recombination3D algorithm to all volumes, ignoring per-volume spec
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.DoRecombinationTest`
  Apply recombination algorithm for test
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RecombinationTestHorizStart`
  Depth start
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.RecombinationTestNoGreedyStrat`
  No greedy (global) strategies
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RecombinationTestNewStrat`
  New strategies
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RemeshAlgorithm`
  Remeshing algorithm (0=no split, 1=automatic, 2=automatic only with metis)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.RemeshParametrization`
  Remeshing using discrete parametrization (0=harmonic_circle, 1=conformal_spectral, 2=rbf, 3=harmonic_plane, 4=convex_circle, 5=convex_plane, 6=harmonic square, 7=conformal_fe
  Default value: `4`
  Saved in: `General.OptionsFileName`
`Mesh.RefineSteps`
  Number of refinement steps in the MeshAdapt-based 2D algorithms
  Default value: `10`
  Saved in: `General.OptionsFileName`
`Mesh.Remove4Triangles`
  Try to remove nodes surrounded by 4 triangles in 2D triangular meshes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ReverseAllNormals`
  Reverse all the mesh normals (for display)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SaveAll`
  Ignore Physical definitions and save all elements
  Default value: `0`
  Saved in: `-`
`Mesh.SaveElementTagType`
  Type of the element tag saved in mesh formats that don't support saving physical or partition ids (1=elementary, 2=physical, 3=partition)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.SaveParametric`
  Save parametric coordinates of nodes
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SaveGroupsOfNodes`
  Save groups of nodes for each physical line and surface (UNV mesh format only)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ScalingFactor`
  Global scaling factor applied to the saved mesh
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.SecondOrderExperimental`
  Use experimental code to generate second order mesh
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SecondOrderIncomplete`
  Create incomplete second order elements? (8-node quads, 20-node hexas, etc.)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SecondOrderLinear`
  Should second order vertices simply be created by linear interpolation?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Smoothing`
  Number of smoothing steps applied to the final mesh
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.SmoothNormals`
  Smooth the mesh normals?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SmoothRatio`
  Ratio between mesh sizes at vertices of a same edeg (used in BAMG)
  Default value: `1.8`
  Saved in: `General.OptionsFileName`
`Mesh.SubdivisionAlgorithm`
  Mesh subdivision algorithm (0=none, 1=all quadrangles, 2=all hexahedra)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SurfaceEdges`
  Display edges of surface mesh?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.SurfaceFaces`
  Display faces of surface mesh?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SurfaceNumbers`
  Display surface mesh element numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.SwitchElementTags`
  Invert elementary and physical tags when reading the mesh
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Tangents`
  Display size of tangent vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Tetrahedra`
  Display mesh tetrahedra?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.ToleranceEdgeLength`
  Skip a model edge in mesh generation if its length is less than user's defined tolerance
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ToleranceInitialDelaunay`
  Tolerance for initial 3D Delaunay mesher
  Default value: `1e-08`
  Saved in: `General.OptionsFileName`
`Mesh.Triangles`
  Display mesh triangles?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.VolumeEdges`
  Display edges of volume mesh?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Mesh.VolumeFaces`
  Display faces of volume mesh?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.VolumeNumbers`
  Display volume mesh element numbers?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Voronoi`
  Display the voronoi diagram
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.ZoneDefinition`
  Method for defining a zone (0=single zone, 1=by partition, 2=by physical)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Points`
  Mesh node color
  Default value: `{0,0,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.PointsSup`
  Second order mesh node color
  Default value: `{255,0,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Lines`
  Mesh line color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Triangles`
  Mesh triangle color (if Mesh.ColorCarousel=0)
  Default value: `{160,150,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Quadrangles`
  Mesh quadrangle color (if Mesh.ColorCarousel=0)
  Default value: `{130,120,225}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Tetrahedra`
  Mesh tetrahedron color (if Mesh.ColorCarousel=0)
  Default value: `{160,150,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Hexahedra`
  Mesh hexahedron color (if Mesh.ColorCarousel=0)
  Default value: `{130,120,225}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Prisms`
  Mesh prism color (if Mesh.ColorCarousel=0)
  Default value: `{232,210,23}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Pyramids`
  Mesh pyramid color (if Mesh.ColorCarousel=0)
  Default value: `{217,113,38}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Tangents`
  Tangent mesh vector color
  Default value: `{255,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Normals`
  Normal mesh vector color
  Default value: `{255,0,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Zero`
  Color 0 in color carousel
  Default value: `{255,120,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.One`
  Color 1 in color carousel
  Default value: `{0,255,132}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Two`
  Color 2 in color carousel
  Default value: `{255,160,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Three`
  Color 3 in color carousel
  Default value: `{0,255,192}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Four`
  Color 4 in color carousel
  Default value: `{255,200,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Five`
  Color 5 in color carousel
  Default value: `{0,216,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Six`
  Color 6 in color carousel
  Default value: `{255,240,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Seven`
  Color 7 in color carousel
  Default value: `{0,176,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Eight`
  Color 8 in color carousel
  Default value: `{228,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Nine`
  Color 9 in color carousel
  Default value: `{0,116,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Ten`
  Color 10 in color carousel
  Default value: `{188,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Eleven`
  Color 11 in color carousel
  Default value: `{0,76,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Twelve`
  Color 12 in color carousel
  Default value: `{148,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Thirteen`
  Color 13 in color carousel
  Default value: `{24,0,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Fourteen`
  Color 14 in color carousel
  Default value: `{108,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Fifteen`
  Color 15 in color carousel
  Default value: `{84,0,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Sixteen`
  Color 16 in color carousel
  Default value: `{68,255,0}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Seventeen`
  Color 17 in color carousel
  Default value: `{104,0,255}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Eighteen`
  Color 18 in color carousel
  Default value: `{0,255,52}`
  Saved in: `General.OptionsFileName`
`Mesh.Color.Nineteen`
  Color 19 in color carousel
  Default value: `{184,0,255}`
  Saved in: `General.OptionsFileName`

Next: Post-processing options list, Previous: Mesh options list, Up: Options

### B.4 Solver options list

`Solver.Executable0`
  System command to launch solver 0
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable1`
  System command to launch solver 1
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable2`
  System command to launch solver 2
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable3`
  System command to launch solver 3
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable4`
  System command to launch solver 4
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable5`
  System command to launch solver 5
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable6`
  System command to launch solver 6
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable7`
  System command to launch solver 7
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable8`
  System command to launch solver 8
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Executable9`
  System command to launch solver 9
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name0`
  Name of solver 0
  Default value: `"GetDP"`
  Saved in: `General.SessionFileName`
`Solver.Name1`
  Name of solver 1
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name2`
  Name of solver 2
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name3`
  Name of solver 3
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name4`
  Name of solver 4
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name5`
  Name of solver 5
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name6`
  Name of solver 6
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name7`
  Name of solver 7
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name8`
  Name of solver 8
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.Name9`
  Name of solver 9
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.OctaveInterpreter`
  Name of the Octave interpreter (used to run .m files)
  Default value: `"octave"`
  Saved in: `General.SessionFileName`
`Solver.PythonInterpreter`
  Name of the Python interpreter (used to run .py files if they are not executable)
  Default value: `"python"`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin0`
  Command to login to a remote host to launch solver 0
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin1`
  Command to login to a remote host to launch solver 1
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin2`
  Command to login to a remote host to launch solver 2
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin3`
  Command to login to a remote host to launch solver 3
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin4`
  Command to login to a remote host to launch solver 4
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin5`
  Command to login to a remote host to launch solver 5
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin6`
  Command to login to a remote host to launch solver 6
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin7`
  Command to login to a remote host to launch solver 7
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin8`
  Command to login to a remote host to launch solver 8
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.RemoteLogin9`
  Command to login to a remote host to launch solver 9
  Default value: `""`
  Saved in: `General.SessionFileName`
`Solver.SocketName`
  Base name of socket (UNIX socket if the name does not contain a colon, TCP/IP otherwise, in the form 'host:baseport'; the actual name/port is constructed by appending the unique client id. If baseport is 0, the port is chosen automatically (recommended))
  Default value: `".gmshsock"`
  Saved in: `General.OptionsFileName`
`Solver.AlwaysListen`
  Always listen to incoming connection requests?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Solver.AutoArchiveOutputFiles`
  Automatically archive output files after each computation
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Solver.AutoCheck`
  Automatically check model every time a parameter is changed
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Solver.AutoSaveDatabase`
  Automatically save database after each computation
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Solver.AutoMesh`
  Automatically mesh if necesssary (0: never remesh; 1: on startup, use existing mesh on disk if available; 2: always remesh)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Solver.AutoMergeFile`
  Automatically merge result files
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Solver.AutoShowViews`
  Automcatically show newly merged results (0: none; 1: all; 2: last one)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`Solver.AutoShowLastStep`
  Automatically show the last time step in newly merged results
  Default value: `1`
  Saved in: `General.OptionsFileName`
`Solver.Plugins`
  Enable default solver plugins?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Solver.ShowInvisibleParameters`
  Show all parameters, even those marked invisible
  Default value: `0`
  Saved in: `General.OptionsFileName`
`Solver.Timeout`
  Time (in seconds) before closing the socket if no connection is happening
  Default value: `5`
  Saved in: `General.OptionsFileName`

Previous: Solver options list, Up: Options

### B.5 Post-processing options list

`PostProcessing.DoubleClickedGraphPointCommand`
  Command parsed when double-clicking on a graph data point (e.g. Merge Sprintf('file_%g.pos', PostProcessing.GraphPointX);)
  Default value: `""`
  Saved in: `General.OptionsFileName`
`PostProcessing.GraphPointCommand`
  Synonym for `DoubleClickedGraphPointCommand'
  Default value: `""`
  Saved in: `General.OptionsFileName`
`PostProcessing.AnimationDelay`
  Delay (in seconds) between frames in automatic animation mode
  Default value: `0.1`
  Saved in: `General.OptionsFileName`
`PostProcessing.AnimationCycle`
  Cycle through time steps (0) or views (1) for animations
  Default value: `0`
  Saved in: `General.OptionsFileName`
`PostProcessing.AnimationStep`
  Step increment for animations
  Default value: `1`
  Saved in: `General.OptionsFileName`
`PostProcessing.CombineRemoveOriginal`
  Remove original views after a Combine operation
  Default value: `1`
  Saved in: `General.OptionsFileName`
`PostProcessing.DoubleClickedGraphPointX`
  Abscissa of last double-clicked graph point
  Default value: `0`
  Saved in: `-`
`PostProcessing.DoubleClickedGraphPointY`
  Ordinate of last double-clicked graph point
  Default value: `0`
  Saved in: `-`
`PostProcessing.DoubleClickedView`
  Index of last double-clicked view
  Default value: `0`
  Saved in: `-`
`PostProcessing.ForceElementData`
  Try to force saving datasets as ElementData
  Default value: `0`
  Saved in: `General.OptionsFileName`
`PostProcessing.ForceNodeData`
  Try to force saving datasets as NodeData
  Default value: `0`
  Saved in: `General.OptionsFileName`
`PostProcessing.Format`
  Default file format for post-processing views (0=ASCII view, 1=binary view, 2=parsed view, 3=STL triangulation, 4=raw text, 5=Gmsh mesh, 6=MED file, 10=automatic)
  Default value: `10`
  Saved in: `General.OptionsFileName`
`PostProcessing.GraphPointX`
  Synonym for `DoubleClickedGraphPointX'
  Default value: `0`
  Saved in: `-`
`PostProcessing.GraphPointY`
  Synonym for `DoubleClickedGraphPointY'
  Default value: `0`
  Saved in: `-`
`PostProcessing.HorizontalScales`
  Display value scales horizontally
  Default value: `1`
  Saved in: `General.OptionsFileName`
`PostProcessing.Link`
  Post-processing view links (0=apply next option changes to selected views, 1=force same options for all selected views)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`PostProcessing.NbViews`
  Current number of views merged (read-only)
  Default value: `0`
  Saved in: `-`
`PostProcessing.Plugins`
  Enable default post-processing plugins?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`PostProcessing.Smoothing`
  Apply (non-reversible) smoothing to post-processing view when merged
  Default value: `0`
  Saved in: `General.OptionsFileName`

`View.Attributes`
  Optional string attributes
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.AxesFormatX`
  Number format for X-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`View.AxesFormatY`
  Number format for Y-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`View.AxesFormatZ`
  Number format for Z-axis (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`View.AxesLabelX`
  X-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.AxesLabelY`
  Y-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.AxesLabelZ`
  Z-axis label
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.DoubleClickedCommand`
  Command parsed when double-clicking on the view
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.FileName`
  Default post-processing view file name
  Default value: `""`
  Saved in: `-`
`View.Format`
  Number format (in standard C form)
  Default value: `"%.3g"`
  Saved in: `General.OptionsFileName`
`View.GeneralizedRaiseX`
  Generalized elevation of the view along X-axis (in model coordinates, using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)
  Default value: `"v0"`
  Saved in: `General.OptionsFileName`
`View.GeneralizedRaiseY`
  Generalized elevation of the view along Y-axis (in model coordinates, using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)
  Default value: `"v1"`
  Saved in: `General.OptionsFileName`
`View.GeneralizedRaiseZ`
  Generalized elevation of the view along Z-axis (in model coordinates, using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)
  Default value: `"v2"`
  Saved in: `General.OptionsFileName`
`View.Group`
  Group to which this view belongs
  Default value: `""`
  Saved in: `General.OptionsFileName`
`View.Name`
  Default post-processing view name
  Default value: `""`
  Saved in: `-`
`View.Stipple0`
  First stippling pattern
  Default value: `"1*0x1F1F"`
  Saved in: `General.OptionsFileName`
`View.Stipple1`
  Second stippling pattern
  Default value: `"1*0x3333"`
  Saved in: `General.OptionsFileName`
`View.Stipple2`
  Third stippling pattern
  Default value: `"1*0x087F"`
  Saved in: `General.OptionsFileName`
`View.Stipple3`
  Fourth stippling pattern
  Default value: `"1*0xCCCF"`
  Saved in: `General.OptionsFileName`
`View.Stipple4`
  Fifth stippling pattern
  Default value: `"2*0x1111"`
  Saved in: `General.OptionsFileName`
`View.Stipple5`
  Sixth stippling pattern
  Default value: `"2*0x0F0F"`
  Saved in: `General.OptionsFileName`
`View.Stipple6`
  Seventh stippling pattern
  Default value: `"1*0xCFFF"`
  Saved in: `General.OptionsFileName`
`View.Stipple7`
  Eighth stippling pattern
  Default value: `"2*0x0202"`
  Saved in: `General.OptionsFileName`
`View.Stipple8`
  Ninth stippling pattern
  Default value: `"2*0x087F"`
  Saved in: `General.OptionsFileName`
`View.Stipple9`
  Tenth stippling pattern
  Default value: `"1*0xFFFF"`
  Saved in: `General.OptionsFileName`
`View.AbscissaRangeType`
  Ascissa scale range type (1=default, 2=custom)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.AdaptVisualizationGrid`
  Use adaptive visualization grid (for high-order elements)?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AngleSmoothNormals`
  Threshold angle below which normals are not smoothed
  Default value: `30`
  Saved in: `General.OptionsFileName`
`View.ArrowSizeMax`
  Maximum display size of arrows (in pixels)
  Default value: `60`
  Saved in: `General.OptionsFileName`
`View.ArrowSizeMin`
  Minimum display size of arrows (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AutoPosition`
  Position the scale or 2D plot automatically (0: manual, 1: automatic, 2: top left, 3: top right, 4: bottom left, 5: bottom right, 6: top, 7: bottom, 8: left, 9: right, 10: full, 11: top third, 12: in model coordinates)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.Axes`
  Axes (0=none, 1=simple axes, 2=box, 3=full grid, 4=open grid, 5=ruler)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AxesMikado`
  Mikado axes style
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AxesAutoPosition`
  Position the axes automatically
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.AxesMaxX`
  Maximum X-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.AxesMaxY`
  Maximum Y-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.AxesMaxZ`
  Maximum Z-axis coordinate
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.AxesMinX`
  Minimum X-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AxesMinY`
  Minimum Y-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AxesMinZ`
  Minimum Z-axis coordinate
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.AxesTicsX`
  Number of tics on the X-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`View.AxesTicsY`
  Number of tics on the Y-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`View.AxesTicsZ`
  Number of tics on the Z-axis
  Default value: `5`
  Saved in: `General.OptionsFileName`
`View.Boundary`
  Draw the `N minus b'-dimensional boundary of the element (N=element dimension, b=option value)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.CenterGlyphs`
  Center glyphs (arrows, numbers, etc.)? (0=left, 1=centered, 2=right)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.Clip`
  Enable clipping planes? (Plane[i]=2^i, i=0,...,5)
  Default value: `0`
  Saved in: `-`
`View.Closed`
  Close the subtree containing this view
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapAlpha`
  Colormap alpha channel value (used only if != 1)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.ColormapAlphaPower`
  Colormap alpha channel power
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapBeta`
  Colormap beta parameter (gamma = 1-beta)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapBias`
  Colormap bias
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapCurvature`
  Colormap curvature or slope coefficient
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapInvert`
  Invert the color values, i.e., replace x with (255-x) in the colormap?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapNumber`
  Default colormap number
  Default value: `2`
  Saved in: `General.OptionsFileName`
`View.ColormapRotation`
  Incremental colormap rotation
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ColormapSwap`
  Swap the min/max values in the colormap?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ComponentMap0`
  Forced component 0 (if View.ForceComponents > 0)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ComponentMap1`
  Forced component 1 (if View.ForceComponents > 0)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.ComponentMap2`
  Forced component 2 (if View.ForceComponents > 0)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`View.ComponentMap3`
  Forced component 3 (if View.ForceComponents > 0)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`View.ComponentMap4`
  Forced component 4 (if View.ForceComponents > 0)
  Default value: `4`
  Saved in: `General.OptionsFileName`
`View.ComponentMap5`
  Forced component 5 (if View.ForceComponents > 0)
  Default value: `5`
  Saved in: `General.OptionsFileName`
`View.ComponentMap6`
  Forced component 6 (if View.ForceComponents > 0)
  Default value: `6`
  Saved in: `General.OptionsFileName`
`View.ComponentMap7`
  Forced component 7 (if View.ForceComponents > 0)
  Default value: `7`
  Saved in: `General.OptionsFileName`
`View.ComponentMap8`
  Forced component 8 (if View.ForceComponents > 0)
  Default value: `8`
  Saved in: `General.OptionsFileName`
`View.CustomAbscissaMax`
  User-defined maximum abscissa value
  Default value: `0`
  Saved in: `-`
`View.CustomAbscissaMin`
  User-defined minimum abscissa value
  Default value: `0`
  Saved in: `-`
`View.CustomMax`
  User-defined maximum value to be displayed
  Default value: `0`
  Saved in: `-`
`View.CustomMin`
  User-defined minimum value to be displayed
  Default value: `0`
  Saved in: `-`
`View.DisplacementFactor`
  Displacement amplification
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawHexahedra`
  Display post-processing hexahedra?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawLines`
  Display post-processing lines?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawPoints`
  Display post-processing points?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawPrisms`
  Display post-processing prisms?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawPyramids`
  Display post-processing pyramids?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawQuadrangles`
  Display post-processing quadrangles?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawScalars`
  Display scalar values?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawSkinOnly`
  Draw only the skin of 3D scalar views?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.DrawStrings`
  Display post-processing annotation strings?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawTensors`
  Display tensor values?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawTetrahedra`
  Display post-processing tetrahedra?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawTriangles`
  Display post-processing triangles?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.DrawVectors`
  Display vector values?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.Explode`
  Element shrinking factor (between 0 and 1)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.ExternalView`
  Index of the view used to color vector fields (-1=self)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`View.FakeTransparency`
  Use fake transparency (cheaper than the real thing, but incorrect)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ForceNumComponents`
  Force number of components to display (see View.ComponentMapN for mapping)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.GeneralizedRaiseFactor`
  Generalized raise amplification factor
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.GeneralizedRaiseView`
  Index of the view used for generalized raise (-1=self)
  Default value: `-1`
  Saved in: `General.OptionsFileName`
`View.GlyphLocation`
  Glyph (arrow, number, etc.) location (1=center of gravity, 2=node)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.Height`
  Height (in pixels) of the scale or 2D plot
  Default value: `200`
  Saved in: `General.OptionsFileName`
`View.IntervalsType`
  Type of interval display (1=iso, 2=continuous, 3=discrete, 4=numeric)
  Default value: `2`
  Saved in: `General.OptionsFileName`
`View.Light`
  Enable lighting for the view
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.LightLines`
  Light element edges
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.LightTwoSide`
  Light both sides of surfaces (leads to slower rendering)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.LineType`
  Display lines as solid color segments (0) or 3D cylinders (1)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.LineWidth`
  Display width of lines (in pixels)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.MaxRecursionLevel`
  Maximum recursion level for adaptive views
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.Max`
  Maximum value in the view (read-only)
  Default value: `0`
  Saved in: `-`
`View.MaxVisible`
  Maximum value in the visible parts of the view (read-only)
  Default value: `0`
  Saved in: `-`
`View.MaxX`
  Maximum view coordinate along the X-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.MaxY`
  Maximum view coordinate along the Y-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.MaxZ`
  Maximum view coordinate along the Z-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.Min`
  Minimum value in the view (read-only)
  Default value: `0`
  Saved in: `-`
`View.MinVisible`
  Minimum value in the visible parts of the view (read-only)
  Default value: `0`
  Saved in: `-`
`View.MinX`
  Minimum view coordinate along the X-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.MinY`
  Minimum view coordinate along the Y-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.MinZ`
  Minimum view coordinate along the Z-axis (read-only)
  Default value: `0`
  Saved in: `-`
`View.NbIso`
  Number of intervals
  Default value: `10`
  Saved in: `General.OptionsFileName`
`View.NbTimeStep`
  Number of time steps in the view (do not change this!)
  Default value: `1`
  Saved in: `-`
`View.NormalRaise`
  Elevation of the view along the normal (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.Normals`
  Display size of normal vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.OffsetX`
  Translation of the view along X-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.OffsetY`
  Translation of the view along Y-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.OffsetZ`
  Translation of the view along Z-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.PointSize`
  Display size of points (in pixels)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`View.PointType`
  Display points as solid color dots (0), 3D spheres (1), scaled dots (2) or scaled spheres (3)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.PositionX`
  X position (in pixels) of the scale or 2D plot (< 0: measure from right edge; >= 1e5: centered)
  Default value: `100`
  Saved in: `General.OptionsFileName`
`View.PositionY`
  Y position (in pixels) of the scale or 2D plot (< 0: measure from bottom edge; >= 1e5: centered)
  Default value: `50`
  Saved in: `General.OptionsFileName`
`View.RaiseX`
  Elevation of the view along X-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.RaiseY`
  Elevation of the view along Y-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.RaiseZ`
  Elevation of the view along Z-axis (in model coordinates)
  Default value: `0`
  Saved in: `-`
`View.RangeType`
  Value scale range type (1=default, 2=custom, 3=per time step)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.Sampling`
  Element sampling rate (draw one out every `Sampling' elements)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.SaturateValues`
  Saturate the view values to custom min and max (1=true, 0=false)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ScaleType`
  Value scale type (1=linear, 2=logarithmic, 3=double logarithmic)
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.ShowElement`
  Show element boundaries?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.ShowScale`
  Show value scale?
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.ShowTime`
  Time display mode (0=hidden, 1=time value if multi-step, 2=time value always, 3=time step if multi-step, 4=time step always)
  Default value: `3`
  Saved in: `General.OptionsFileName`
`View.SmoothNormals`
  Smooth the normals?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.Stipple`
  Stipple curves in 2D plots?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.Tangents`
  Display size of tangent vectors (in pixels)
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.TargetError`
  Target representation error for adaptive views
  Default value: `0.01`
  Saved in: `General.OptionsFileName`
`View.TensorType`
  Tensor Visualization Type
  Default value: `1`
  Saved in: `General.OptionsFileName`
`View.TimeStep`
  Current time step displayed
  Default value: `0`
  Saved in: `-`
`View.Time`
  Current time displayed (if positive, sets the time step corresponding the given time value)
  Default value: `0`
  Saved in: `-`
`View.TransformXX`
  Element (1,1) of the 3x3 coordinate transformation matrix
  Default value: `1`
  Saved in: `-`
`View.TransformXY`
  Element (1,2) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformXZ`
  Element (1,3) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformYX`
  Element (2,1) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformYY`
  Element (2,2) of the 3x3 coordinate transformation matrix
  Default value: `1`
  Saved in: `-`
`View.TransformYZ`
  Element (2,3) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformZX`
  Element (3,1) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformZY`
  Element (3,2) of the 3x3 coordinate transformation matrix
  Default value: `0`
  Saved in: `-`
`View.TransformZZ`
  Element (3,3) of the 3x3 coordinate transformation matrix
  Default value: `1`
  Saved in: `-`
`View.Type`
  Type of plot (1=3D, 2=2D space, 3=2D time, 4=2D)
  Default value: `1`
  Saved in: `-`
`View.UseGeneralizedRaise`
  Use generalized raise?
  Default value: `0`
  Saved in: `General.OptionsFileName`
`View.VectorType`
  Vector display type (1=segment, 2=arrow, 3=pyramid, 4=3D arrow, 5=displacement, 6=comet)
  Default value: `4`
  Saved in: `General.OptionsFileName`
`View.Visible`
  Is the view visible?
  Default value: `1`
  Saved in: `-`
`View.Width`
  Width (in pixels) of the scale or 2D plot
  Default value: `300`
  Saved in: `General.OptionsFileName`
`View.Color.Points`
  Point color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Lines`
  Line color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Triangles`
  Triangle color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Quadrangles`
  Quadrangle color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Tetrahedra`
  Tetrahedron color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Hexahedra`
  Hexahedron color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Prisms`
  Prism color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Pyramids`
  Pyramid color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Tangents`
  Tangent vector color
  Default value: `{255,255,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Normals`
  Normal vector color
  Default value: `{255,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Text2D`
  2D text color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Text3D`
  3D text color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Axes`
  Axes color
  Default value: `{0,0,0}`
  Saved in: `General.OptionsFileName`
`View.Color.Background2D`
  Bacground color for 2D plots
  Default value: `{255,255,255}`
  Saved in: `General.OptionsFileName`
`View.ColorTable`
  Color table used to draw the view
  Saved in: `General.OptionsFileName`

Next: Information for developers, Previous: Options, Up: Top

## Appendix C Compiling the source code

Stable releases and nightly source snapshots are available from http://geuz.org/gmsh/src/. You can also access the subversion repository directly:

1. The first time you want to download the latest full source, type:

                 svn co https://geuz.org/svn/gmsh/trunk gmsh

   You will be asked to accept the security certificate and to provide your username and password. (Use gmsh/gmsh for read-only access.)

2. To update your local version to the latest and greatest, go in the gmsh directory and type:

                 svn update

3. If you have write access, to commit your changes to the central repository, go in the gmsh directory and type:

                 svn commit

4. If you want to remove part of the tree from being downloaded, you can change its “ambiant” depth to “empty”. For example, if you don't want to upate the “projects” subdirectory (as well as its subdirectories), type:

                 cd projects
                 svn update --set-depth empty

   To later restore the projects for recursive updating, type:

                 cd projects
                 svn update --set-depth infinity

Once you have the source code, you need to run CMake to configure your build (see the README.txt 26 file in the top-level source directory for detailed information on how to run CMake).

Each build can be configured using a series of options, to selectively enable optional modules or features. Here is the list of CMake options:

`ENABLE_3M`
  Enable proprietary 3M extension (default: OFF)
`ENABLE_ACIS`
  Enable ACIS geometrical models (experimental) (default: ON)
`ENABLE_ANN`
  Enable ANN (used for fast point search in mesh/post) (default: ON)
`ENABLE_BAMG`
  Enable Bamg 2D anisotropic mesh generator (default: ON)
`ENABLE_BFGS`
  Enable BFGS (used by some mesh optimizers) (default: ON)
`ENABLE_BLAS_LAPACK`
  Enable BLAS/Lapack for linear algebra (required for meshing) (default: ON)
`ENABLE_BLOSSOM`
  Enable Blossom algorithm (needed for full quad meshing) (default: ON)
`ENABLE_BUILD_LIB`
  Enable 'lib' target for building static Gmsh library (default: OFF)
`ENABLE_BUILD_SHARED`
  Enable 'shared' target for building shared Gmsh library (default: OFF)
`ENABLE_BUILD_DYNAMIC`
  Enable dynamic Gmsh executable (linked with shared lib) (default: OFF)
`ENABLE_BUILD_ANDROID`
  Enable Android NDK library target (experimental) (default: OFF)
`ENABLE_BUILD_IOS`
  Enable iOS (ARM) library target (experimental) (default: OFF)
`ENABLE_CGNS`
  Enable CGNS mesh export (experimental) (default: OFF)
`ENABLE_CAIRO`
  Enable Cairo to render fonts (experimental) (default: ON)
`ENABLE_CHACO`
  Enable Chaco mesh partitioner (alternative to Metis) (default: ON)
`ENABLE_COMPRESSED_IO`
  Enable compressed (gzip) input/output using zlib (default: OFF)
`ENABLE_DINTEGRATION`
  Enable discrete integration (needed for levelsets) (default: ON)
`ENABLE_FLTK`
  Enable FLTK graphical user interface (requires mesh/post) (default: ON)
`ENABLE_FOURIER_MODEL`
  Enable Fourier geometrical models (experimental) (default: OFF)
`ENABLE_GMM`
  Enable GMM linear solvers (simple alternative to PETSc) (default: ON)
`ENABLE_GRAPHICS`
  Enable building graphics lib even without GUI (advanced) (default: OFF)
`ENABLE_KBIPACK`
  Enable Kbipack (neeeded by homology solver) (default: ON)
`ENABLE_MATHEX`
  Enable math expression parser (used by plugins and options) (default: ON)
`ENABLE_MED`
  Enable MED mesh and post file formats (default: ON)
`ENABLE_MESH`
  Enable mesh module (required by GUI) (default: ON)
`ENABLE_METIS`
  Enable Metis mesh partitioner (default: ON)
`ENABLE_MMG3D`
  Enable MMG3D 3D anisotropic mesh refinement (default: ON)
`ENABLE_MPEG_ENCODE`
  Enable built-in MPEG movie encoder (default: ON)
`ENABLE_MPI`
  Enable MPI (mostly for parser and solver - mesh generation is sequential) (default: OFF)
`ENABLE_MSVC_STATIC_RUNTIME`
  Enable static Visual C++ runtime (default: OFF)
`ENABLE_MUMPS`
  Enable MUMPS sparse direct linear solver (default: OFF)
`ENABLE_NATIVE_FILE_CHOOSER`
  Enable native file chooser in GUI (default: ON)
`ENABLE_NETGEN`
  Enable Netgen 3D frontal mesh generator (default: ON)
`ENABLE_NUMPY`
  Enable conversion between fullMatrix and numpy array (requires SWIG) (default: OFF)
`ENABLE_PETSC4PY`
  Enable petsc4py wrappers for petsc matrices (default: ON)
`ENABLE_OCC`
  Enable Open CASCADE geometrical models (default: ON)
`ENABLE_ONELAB`
  Enable ONELAB solver interface (default: ON)
`ENABLE_ONELAB2`
  Enable experimental ONELAB-Cloud solver interface (default: OFF)
`ENABLE_ONELAB_METAMODEL`
  Enable ONELAB metamodels (experimental) (default: ON)
`ENABLE_OPENMP`
  Enable OpenMP (experimental) (default: OFF)
`ENABLE_OPTHOM`
  Enable high-order mesh optimization tools (default: ON)
`ENABLE_OS_SPECIFIC_INSTALL`
  Enable OS-specific (e.g. app bundle) installation (default: ON)
`ENABLE_OSMESA`
  Enable OSMesa for offscreen rendering (experimental) (default: OFF)
`ENABLE_PARSER`
  Enable GEO file parser (required for .geo/.pos files) (default: ON)
`ENABLE_PETSC`
  Enable PETSc linear solvers (required for SLEPc) (default: ON)
`ENABLE_PLUGINS`
  Enable post-processing plugins (default: ON)
`ENABLE_POST`
  Enable post-processing module (required by GUI) (default: ON)
`ENABLE_POPPLER`
  Enable Poppler for displaying PDF documents (experimental) (default: OFF)
`ENABLE_QT`
  Enable dummy QT graphical interface proof-of-concept (experimental) (default: OFF)
`ENABLE_RTREE`
  Enable RTREE (used for quad/hex mesh generation) (default: ON)
`ENABLE_SALOME`
  Enable Salome routines for CAD healing (default: ON)
`ENABLE_SGEOM`
  Enable SGEOM interface to OCC (experimental) (default: OFF)
`ENABLE_SLEPC`
  Enable SLEPc eigensolvers (required for conformal compounds) (default: ON)
`ENABLE_SOLVER`
  Enable built-in finite element solvers (required for compounds) (default: ON)
`ENABLE_TAUCS`
  Enable Taucs linear solver (alternative to PETSc) (default: ON)
`ENABLE_TCMALLOC`
  Enable libtcmalloc, a fast malloc implementation but that does not release memory (default: OFF)
`ENABLE_TETGEN`
  Enable Tetgen 3D initial mesh generator (default: ON)
`ENABLE_TETGEN_OLD`
  Enable older version of Tetgen (default: OFF)
`ENABLE_VORO3D`
  Enable Voro3D (for hex meshing, experimental) (default: ON)
`ENABLE_WRAP_JAVA`
  Enable generation of Java wrappers (experimental) (default: OFF)
`ENABLE_WRAP_PYTHON`
  Enable generation of Python wrappers (default: OFF)

Next: Frequently asked questions, Previous: Compiling the source code, Up: Top

## Appendix D Information for developers

Gmsh is written in C++, the scripting language is parsed using Lex and Yacc (actually, Flex and Bison), and the GUI relies on OpenGL for the 3D graphics and FLTK (http://www.fltk.org) for the widget set. Gmsh's build system is based on CMake (http://www.cmake.org). Practical notes on how to compile Gmsh's source code is provided in Compiling the source code (see also Frequently asked questions).

Next: Coding style, Previous: Information for developers, Up: Information for developers

### D.1 Source code structure

Gmsh's code is structured in several subdirectories, roughly separated between the four core modules (Geo 27, Mesh, Solver, Post) and associated utilities (Common, Numeric) on one hand, and the graphics (Graphics) and interface (Fltk, Parser) code on the other.

The geometry and mesh modules are based on an object-oriented model class (Geo/GModel.h), built upon abstract geometrical entity classes (Geo/GVertex.h, Geo/GEdge.h, Geo/GFace.h and Geo/GRegion.h). Concrete implementations of the geometrical entity classes are provided for each supported CAD kernel (e.g. Geo/gmshVertex.h for geometry points in Gmsh's native CAD format, or Geo/OCCVertex.h for geometry points from OpenCASCADE). The post-processing module is based on the concept of views (Post/PView.h) and abstract data containers (derived from Post/PViewData.h).

Next: Adding a new option, Previous: Source code structure, Up: Information for developers

### D.2 Coding style

If you plan to contribute code to the Gmsh project, here are some easy rules to make the code easy to read/debug/maintain:

1. Please enable full warnings for your compiler (e.g. `-Wall` with `g++`) and don't commit until there is no warning left.
2. Use memory checking tools to detect memory leaks and other nasty memory problems. For example, you can use
   - Valgrind on Linux:

                        valgrind --leak-check=yes --show-reachable=yes gmsh file.geo -3

   - GMALLOC on Mac OS X:

                        (gdb) set env DYLD_INSERT_LIBRARIES /usr/lib/libgmalloc.dylib

   - LIBNJAMD:

                        export LD_PRELOAD=libnjamd.so
                        kill -USR1

   - Purify
   - Memprof
   - ...
3. always use the `Msg::` class to print information or errors
4. indent your files (2 spaces) and convert all tabs to spaces
5. follow the style used in the existing code when adding something new (spaces after commas, opening braces for functions on a separate line, opening braces for loops and tests on the same line, etc.)

Previous: Coding style, Up: Information for developers

### D.3 Adding a new option

To add a new option in Gmsh:

1. create the option in the `CTX` class (Common/Context.h 28) if it's a classical option, or in the `PViewOptions` class (Post/PViewOptions.h) if it's a post-processing view-dependent option;
2. in Common/DefaultOptions.h, give a name (for the parser to be able to access it), a reference to a handling routine (i.e. `opt_XXX`) and a default value for this option;
3. create the handling routine `opt_XXX` in Common/Options.cpp (and add the prototype in Common/Options.h);
4. optional: create the associated widget in Fltk/optionWindow.h;

Next: Version history, Previous: Information for developers, Up: Top

## Appendix E Frequently asked questions

Next: Installation problems, Previous: Frequently asked questions, Up: Frequently asked questions

### E.1 The basics

1. What is Gmsh?

   Gmsh is an automatic three-dimensional finite element mesh generator with built-in pre- and post-processing facilities. With Gmsh you can create or import 1D, 2D and 3D geometrical models, mesh them, launch external finite element solvers and visualize solutions. Gmsh can be used either as a stand-alone program (graphical or not) or as a C++ library.

2. What are the terms and conditions of use?

   Gmsh is distributed under the terms of the GNU General Public License, with an exception to allow for easier linking with external libraries. See License for more information.

3. What does 'Gmsh' mean?

   Nothing... The name was derived from a previous version called “msh” (a shortcut for “mesh”), with the “g” prefix added to differentiate it. The default mesh file format used by Gmsh still uses the `.msh` extension.

   In English people tend to pronounce `Gmsh' as “gee-mesh”.

4. Where can I find more information?

   http://geuz.org/gmsh is the primary location to obtain information about Gmsh. There you will for example find the complete reference manual, a bug tracking database and a searchable archive of the Gmsh mailing list (gmsh@geuz.org).

Next: General questions, Previous: The basics, Up: Frequently asked questions

### E.2 Installation problems

1. Which OSes does Gmsh run on?

   Gmsh runs on Windows, Mac OS X, Linux and most Unix variants.

2. Are there additional requirements to run Gmsh?

   You should have the OpenGL libraries installed on your system, and in the path of the library loader. A free replacement for OpenGL can be found at http://www.mesa3d.org.

3. How do I compile Gmsh from the source code?

   You need cmake (http://www.cmake.org) and a C++ compiler. See Compiling the source code and the README.txt 29 file in the top-level source directory for more information.

4. Where does Gmsh save its configuration files?

   Gmsh will attempt to save temporary files and persistent configuration options first in the `$GMSH_HOME` directory, then in `$APPDATA` (on Windows) or `$HOME` (on other OSes), then in `$TMP`, and finally in `$TEMP`, in that order. If none of these variables are defined, Gmsh will try to save/load its configuration files from the current working directory.

Next: Geometry module questions, Previous: Installation problems, Up: Frequently asked questions

### E.3 General questions

1. Gmsh (from a binary distribution) complains about missing libraries.

   On Windows, if your system complains about missing `OPENGL32.DLL` or `GLU32.DLL` libraries, then OpenGL is not properly installed on your machine. You can download OpenGL from Microsoft's web site, or directly from http://www.opengl.org.

   On Unix try `ldd gmsh' (or `otool -L gmsh' on Mac OS X) to check if all the required shared libraries are installed on your system. If not, install them. If it still doesn't work, recompile Gmsh from the source code.

2. Gmsh keeps re-displaying its graphics when other windows partially hide the graphical window.

   Disable opaque move in your window manager.

3. The graphics display very slowly.

   Are you are executing Gmsh from a remote host (via the network) without GLX? You should turn double buffering off (with the `-nodb' command line option).

4. There is an ugly “ghost triangulation” in the vector PostScript/PDF files generated by Gmsh!

   No, there isn't. This “ghost triangulation” is due to the fact that most PostScript previewers nowadays antialias the graphic primitives when they display the page on screen. (For example, in gv, you can disable antialising with the `State->Antialias' menu.) You should not see this ghost triangulation in the printed output (on paper).

5. How can I save GIF, JPEG, ..., images?

   Just choose the appropriate format in `File->Save As'. By default Gmsh guesses the format from the file extension, so you can just type `myfile.jpg` in the dialog and Gmsh will automatically create a JPEG image file.

6. How can I save MPEG, AVI, ..., animations?

   You can create simple MPEG animations by choosing MPEG as the format in `File->Save As': this allows you to loop over time steps or post-processing data sets, or to change parameters according to `Print.Parameter`. To create fully customized animations or to use different output formats (AVI, MP4, etc.) you should write a script. Have a look at t8.geo or demos/anim.script 30 for some examples.

7. Can I change values in input fields with the mouse in the GUI?

   Yes: dragging the mouse in a numeric input field slides the value! The left button moves one step per pixel, the middle by `10*step', and the right button by `100*step'.

8. Can I copy messages to the clipboard?

   Yes: selecting the content of an input field, or lines in the message console (`Tools->Message Console'), copies the selected text to the clipboard.

Next: Mesh module questions, Previous: General questions, Up: Frequently asked questions

### E.4 Geometry module

1. Does Gmsh support NURBS curves/surfaces?

   Yes, but only via STEP, IGES or BREP model import (not in `.geo` files). Gmsh has to be compiled with OpenCASCADE support for this to work.

2. Gmsh is very slow when I use many transformations (Translate, Rotate, Symmetry, Extrude, etc. ). What's wrong?

   The default behavior of Gmsh is to check and suppress all duplicate entities (points, lines and surfaces) each time a transformation command is issued. This can slow down things a lot if many transformations are performed. There are two solutions to this problem:

   - you may save the unrolled geometry in another file (e.g. with gmsh file.geo -0), and use this new file for subsequent computations;
   - or you may set the `Geometry.AutoCoherence` option to 0. This will prevent any automatic duplicate check/replacement. If you still need to remove the duplicates entities, simply add `Coherence;` at strategic locations in your geo files (e.g. before the creation of line loops, etc.).
3. How can I display only selected parts of my model?

   Use `Tools->Visibility'. This allows you to select elementary entities and physical groups, as well as mesh elements, in a variety of ways (in a list or tree browser, by identification number, interactively, or per window).

4. Can I edit STEP/IGES/BRep models?

   Not yet. At the moment you can only change mesh element sizes, define volumes and physical groups, or delete entities. The easiest way to do this is to merge the model in a `.geo` file using `Merge "file.step";` and add the relevant scripting command after that. We plan to add more advanced editing features in the future (to delete entities, to create “mixed” surfaces and volumes, to export in `.geo` format, etc.).

5. How can I build modular geometries?

   Define common geometrical objects and options in separate files, reusable in all your problem definition structures. Then Include the files in your main project file.

Next: Solver module questions, Previous: Geometry module questions, Up: Frequently asked questions

### E.5 Mesh module

1. What should I do when the 2D unstructured algorithm fails?

   Verify that the curves in the model do not self-intersect. If `Mesh.RandomFactor*size(triangle)/size(model)' approaches machine accuracy, increase Mesh.RandomFactor.

   If everything fails file a bug report with the version of your operating system and the full geometry.

2. What should I do when the 3D unstructured algorithm fails?

   Verify that the surfaces in your model do not self-intersect or partially overlap. If they don't, try the other 3D algorithms (`Tool->Options->Mesh->General->3D algorithm') or try to adapt the mesh element sizes in your input file so that the surface mesh better matches the geometrical details of the model.

   If nothing works, file a bug report with the version of your operating system and and the full geometry.

3. My 2D meshes of IGES files present gaps between surfaces

   IGES files do not contain the topology of the model, and tolerance problems can thus appear when the OpenCASCADE importer cannot identify two (close) curves as actually being identical.

   The best solution is to not use IGES and use STEP instead. If you really have to use IGES, check that you don't have duplicate curves (e.g. by displaying their numbers in the GUI with `Tools->Options->Geometry->Visibility->Line numbers'). If there are duplicates, try to change the geometrical tolerance and sew the faces (see options in `Tools->Options->Geometry->General').

4. The quality of the elements generated by the 3D algorithm is very bad.

   Use `Optimize quality' in the mesh menu.

5. Non-recombined 3D extruded meshes sometimes fail.

   The swapping algorithm is not very clever at the moment. Try to change the surface mesh a bit, or recombine your mesh to generate prisms or hexahedra instead of tetrahedra.

6. Does Gmsh automatically couple unstructured tetrahedral meshes and structured hexahedral meshed using pyramids?

   Only in simple geometrical cases. We need your help to improve this.

7. Can I explicitly assign region numbers to extruded layers?

   No, this feature has been removed in Gmsh 2.0. You must use the standard entity number instead.

8. Did you remove the elliptic mesh generator in Gmsh 2.0?

   Yes. You can achieve the same result by using the transfinite algorithm with smoothing (e.g., with `Mesh.Smoothing = 10`).

9. Does Gmsh support curved elements?

   Yes, Gmsh can generate both 1st order and 2nd order elements. To generate second order elements, click on `High order' in the mesh menu after the mesh is completed. To always generate 2nd order elements, select `Generate second order elements' in the mesh option panel. From the command line, you can also use `-order 2`.

10. Can I import an existing surface mesh in Gmsh and use it to build a 3D mesh?

    Yes, you can import a surface mesh in any one of the supported mesh file formats, define a volume, and mesh it. For an example see demos/sphere-discrete.geo 31.

11. How do I define boundary conditions or material properties in Gmsh?

    By design, Gmsh does not try to incorporate every possible definition of boundary conditions or material properties—this is a job best left to the solver. Instead, Gmsh provides a simple mechanism to tag groups of elements, and it is up to the solver to interpret these tags as boundary conditions, materials, etc. Associating tags with elements in Gmsh is done by defining Physical entities (Physical Points, Physical Lines, Physical Surfaces and Physical Volumes). See the reference manual as well as the tutorials (in particular t1.geo) for a detailed description and some examples.

12. How can I display only the mesh associated with selected geometrical entities?

    See “How can I display only selected parts of my model?”.

13. How can I “explore” a mesh (for example, to see inside a complex structure)?

    You can use `Tools->Clipping Planes' to clip the region of interest. You can define up to 6 clipping planes in Gmsh (i.e., enough to define a “cube” inside your model) and each plane can clip either the geometry, the mesh, the post-processing views, or any combination of the above. The clipping planes are defined using the four coefficients A,B,C,D of the equation A*x+B*y+C*y+D=0, which can be adjusted interactively by dragging the mouse in the input fields.

14. What is the signification of Rho, Eta and Gamma in Tools->Statistics?

    They measure the quality of the tetrahedra in a mesh:

    Gamma ~ inscribed_radius / circumscribed_radius Eta ~ volume^(2/3) / sum_edge_length^2 Rho ~ min_edge_length / max_edge_length

    For the exact definitions, see Geo/MElement.cpp. The graphs plot the the number of elements vs. the quality measure.

15. Why don't the vertex and/or elememt numbers on the screen match the numbers in the mesh file?

    Gmsh reindexes the mesh vertices and elements so that they are numbered in a continuous sequence in the output files. The numbers displayed on screen after mesh generation thus usually differ from the ones saved in the mesh files. To check the actual numbers saved in the output file just load the mesh file back using `File->Open'.

Next: Post-processing module questions, Previous: Mesh module questions, Up: Frequently asked questions

### E.6 Solver module

1. How do I integrate my own solver with Gmsh?

   Gmsh uses the ONELAB interface (http://www.onelab.info) to interact with external solvers. Have a look at the GetDP finite element solver (http://geuz.org/getdp) to see how this is done.

2. Can I launch Gmsh from my solver (instead of launching my solver from Gmsh) in order to monitor a solution?

   Sure. The simplest (but rather crude) approach if to re-launch Gmsh everytime you want to visualize something (a simple C program showing how to do this is given in utils/misc/callgmsh.c). A better approach is to modify your program so that it can communicate with Gmsh over a socket (see “How do I integrate my own solver with Gmsh?” above; you can skip the option file creation). Then select `Always listen to incoming connection requests' in the solver option panel (or run gmsh with the `-listen` command line option) and Gmsh will always listen for your program on the Solver.SocketName socket.

Previous: Solver module questions, Up: Frequently asked questions

### E.7 Post-processing module

1. How do I compute a section of a plot?

   Use `Tools->Plugins->Cut Plane'.

2. Can I save an isosurface to a file?

   Yes: first run `Tools->Plugins->Cut Map' to extract the isosurface, then use `View->Save As' to save the new view.

3. Can Gmsh generate isovolumes?

   Yes, with the CutMap plugin (set the ExtractVolume option to -1 or 1 to extract the negative or positive levelset).

4. How do I animate my plots?

   If the views contain multiple time steps, you can press the `play' button at the bottom of the graphic window, or change the time step by hand in the view option panel. You can also use the left and right arrow keys on your keyboard to change the time step in all visible views in real time.

   If you want to loop through different views instead of time steps, you can use the `Loop through views instead of time steps' option in the view option panel, or use the up and down arrow keys on your keyboard.

5. How do I visualize a deformed mesh?

   Load a vector view containing the displacement field, and set `Vector display' to `Displacement' in `View->Options->Aspect'. If the displacement is too small (or too large), you can scale it with the `Displacement factor' option. (Remember that you can drag the mouse in all numeric input fields to slide the value!)

   Another option is to use the `General transformation expressions' (in View->Options->Offset) on a scalar view, with the displacement map selected as the data source.

6. Can I visualize a field on a deformed mesh?

   Yes, there are several ways to do that.

   The easiest is to load two views: the first one containing a displacement field (a vector view that will be used to deform the mesh), and the second one containing the field you want to display (this view has to contain the same number of elements as the displacement view). You should then set `Vector display' to `Displacement' in the first view, as well as set `Data source' to point to the second view. (You might want to make the second view invisible, too. If you want to amplify or decrease the amount of deformation, just modify the `Displacement factor' option.)

   Another solution is to use the `General transformation expressions' (in `View->Options->Offset') on the field you want to display, with the displacement map selected as the data source.

   And yet another solution is to use the Warp plugin.

7. Can I color the arrows representing a vector field with data from a scalar field?

   Yes: load both the vector and the scalar fields (the two views must have the same number of elements) and, in the vector field options, select the scalar view in `Data source'.

8. Can I color isovalue surfaces with data from another scalar view?

   Yes, using either the CutMap plugin (with the `dView' option) or the Evaluate plugin.

9. Is there a way to save animations?

   You can save simple MPEG animations directly from the `File->Save As' menu. For other formats you should write a script. Have a look at t8.geo or demos/anim.script for some examples.

10. Is there a way to visualize only certain components of vector/tensor fields?

    Yes, by using either the “Force field” options in `Tools->Options->View->Visibility', or by using `Tools->Plugins->MathEval'.

11. Can I do arithmetic operations on a view? Can I perform operations involving different views?

    Yes, with the Evaluate plugin.

12. Some plugins seem to create empty views. What's wrong?

    There can be several reasons:

    - the plugin might be written for specific element types only (for example, only for scalar triangles or tetrahedra). In that case, you should transform your view before running the plugin (you can use `Plugin(DecomposeinSimplex)` to transform all quads, hexas, prisms and pyramids into triangles and tetrahedra).
    - the plugin might expect a mesh while all you provide is a point cloud. In 2D, you can use `Plugin(Triangulate)` to transform a point cloud into a triangulated surface. In 3D you can use `Plugin(Tetrahedralize)`.
    - the input parameters are out of range.

    In any case, you can automatically remove all empty views with `View->Remove->Empty Views' in the GUI, or with `Delete Empty Views;` in a script.

13. How can I see “inside” a complicated post-processing view?

    Use `Tools->Clipping Planes'.

    When viewing 3D scalar fields, you can also modify the colormap (`Tools->Options->View->Map') to make the iso-surfaces “transparent”: either by holding `Ctrl' while dragging the mouse to draw the alpha channel by hand, or by using the `a', `Ctrl+a', `p' and `Ctrl+p' keyboard shortcuts.

    Yet another (destructive) option is to use the ExtractVolume option in the CutSphere or CutPlane plugins.

14. I am loading a valid 3D scalar view but Gmsh does not display anything!

    If your dataset is constant per element make sure you don't use the `Iso-values' interval type in `Tools->Options->View->Range'.

Next: Copyright and credits, Previous: Frequently asked questions, Up: Top

## Appendix F Version history

    2.10.1: small fixes.

    2.10.0 (July 21, 2015): improved periodic meshing constraints; new Physical
    specification with both label and numeric id; images can now be used as glyphs
    in post-processing views, using text annotations with the `file://' prefix;
    Views can be grouped and organized in subtrees; improved visibility browser
    navigation; geometrical entities and post-processing views can now react to
    double-clicks, via new generic DoubleClicked options; new Get/SetNumber and
    Get/SetString for direct access to ONELAB variables; small bug fixes and code
    cleanups.

    2.9.3 (April 18, 2015): updated versions of PETSc/SLEPc and OpenCASCADE/OCE
    libraries used in official binary builds; new Find() command; miscellaneous code
    cleanups and small fixes.

    2.9.2 (March 31, 2015): added support for extrusion of embedded points/curves;
    improved hex-dominant algorithm; fixed crashes in quad algorithm; fix regression
    in MED reader introduced in 2.9.0; new dark interface mode.

    2.9.1 (March 18, 2015): minor bug fixes.

    2.9.0 (March 12, 2015): improved robustness of spatial searches (extruded meshes,
    geometry coherence); improved reproductibility of 2D and 3D meshes; added
    support for high resolution ("retina") graphics; interactive graph point
    commands; on-the-fly creation of onelab clients in scripts; general periodic
    meshes using afine transforms; scripted selection of entities in bounding boxes;
    extended string and list handling functions; many small improvements and bug
    fixes.

    2.8.5 (Jul 9, 2014): improved stability and error handling, better Coherence
    function, updated onelab API version and inline parameter definitions, new
    background image modes, more robust Triangulate/Tetrahedralize plugins, new PGF
    output, improved support for string~index variable names in parser, small
    improvements and bug fixes all over the place.

    2.8.4 (Feb 7, 2014): better reproductibility of 2D meshes; new mandatory 'Name'
    attribute to define onelab variables in DefineConstant[] & co; new
    -setnumber/-setstring command line arguments; small improvements and bug fixes.

    2.8.3 (Sep 27, 2013): new quick access menu and multiple view selection in GUI;
    enhanced animation creation; many small enhancements and bug fixes.

    2.8.2 (Jul 16, 2013): improved high order tools interface; minor bug fixes.

    2.8.1 (Jul 11, 2013): improved compound surfaces and transfinite arrangements.

    2.8.0 (Jul 8, 2013): improved Delaunay point insertion; fixed mesh orientation
    of plane surfaces; fixed mesh size prescribed at embedded points; improved
    display of vectors at COG; new experimental text string display engines;
    improved fullscreen mode; access time/step in transformations; new experimental
    features: AdaptMesh and Surface In Volume; accept unicode file paths on Windows;
    compilation and bug fixes.

    2.7.1 (May 11, 2013): improved Delaunay point insertion; updated onelab; better
    Abaqus and UNV export; small bug and compilation fixes.

    2.7.0 (Mar 9, 2013): new single-window GUI, with dynamically customizable
    widget tree; faster STEP/BRep import; arbitrary size image export; faster 2D
    Delaunay/Frontal algorithms; full option viewer/editor; many bug fixes.

    2.6.1 (Jul 15, 2012): minor improvements and bug fixes.

    2.6.0 (Jun 19, 2012): new quadrilateral meshing algorithms (Blossom and
    DelQuad); new solver module based on ONELAB project (requires FLTK 1.3); new
    tensor field visualization modes (eigenvectors, ellipsoid, etc.); added support
    for interpolation schemes in .msh file; added support for MED3 format; rescale
    viewport around visible entities (shift+1:1 in GUI); unified post-processing
    field export; new experimental stereo+camera visualization mode; added
    experimental BAMG & MMG3D support for anisotropic mesh generation; new OCC cut &
    merge algorithm imported from Salome; new ability to connect extruded meshes to
    tetrahedral grids using pyramids; new homology solver; Abaqus (INP) mesh export;
    new Python and Java wrappers; bug fixes and small improvements all over the
    place.

    2.5.0 (Oct 15, 2010): new compound geometrical entities (for remeshing and/or
    trans-patch meshing); improved mesh reclassification tool; new client/server
    visualization mode; new ability to watch a pattern of files to merge; new
    integrated MPEG export; new option to force the type of views dynamically;
    bumped mesh version format to 2.2 (small change in the meaning of the partition
    tags; this only affects partitioned (i.e. parallel) meshes); renamed several
    post-processing plugins (as well as plugin options) to make them easier to
    understand; many bug fixes and usability improvements all over the place.

    2.4.2 (Sep 21, 2009): solver code refactoring + better IDE integration.

    2.4.1 (Sep 1, 2009): fixed surface mesh orientation bug introduced in 2.4.0;
    mesh and graphics code refactoring, small usability enhancements and bug fixes.

    2.4.0 (Aug 22, 2009): switched build system to CMake; optionally copy
    transfinite mesh contraints during geometry transformations; bumped mesh version
    format to 2.1 (small change in the $PhysicalNames section, where the group
    dimension is now required); ported most plugins to the new post-processing API;
    switched from MathEval to MathEx and Flu_Tree_Browser to Fl_Tree; small bug
    fixes and improvements all over the place.

    2.3.1 (Mar 18, 2009): removed GSL dependency (Gmsh now simply uses Blas and
    Lapack); new per-window visibility; added support for composite window printing
    and background images; fixed string option affectation in parser; fixed surface
    mesh orientation for Open CASCADE models; fixed random triangle orientations in
    Delaunay and Frontal algorithms.

    2.3.0 (Jan 23, 2009): major graphics and GUI code refactoring; new
    full-quad/hexa subdivision algorithm; improved automatic transfinite corner
    selection (now also for volumes); improved visibility browser; new automatic
    adaptive visualization for high-order simplices; modified arrow size, clipping
    planes and transform options; many improvements and bug fixes all over the
    place.

    2.2.6 (Nov 21, 2008): better transfinite smoothing and automatic corner
    selection; fixed high order meshing crashes on Windows and Linux; new uniform
    mesh refinement (thanks Brian!); fixed various other small bugs.

    2.2.5 (Oct 25, 2008): Gmsh now requires FLTK 1.1.7 or above; various small
    improvements (STL and VTK mesh IO, Netgen upgrade, Visual C++ support, Fields,
    Mesh.{Msh,Stl,...}Binary changed to Mesh.Bindary) and bug fixes (pyramid
    interpolation, Chaco crashes).

    2.2.4 (Aug 14, 2008): integrated Metis and Chaco mesh partitioners; variables
    can now be deleted in geo files; added support for point datasets in model-based
    postprocessing views; small bug fixes.

    2.2.3 (Jul 14, 2008): enhanced clipping interface; API cleanup; fixed various
    bugs (Plugin(Integrate), high order meshes, surface info crash).

    2.2.2 (Jun 20, 2008): added geometrical transformations on volumes; fixed bug in
    high order mesh generation.

    2.2.1 (Jun 15, 2008): various small improvements (adaptive views, GUI, code
    cleanup) and bug fixes (high order meshes, Netgen interface).

    2.2.0 (Apr 19, 2008): new model-based post-processing backend; added MED I/O for
    mesh and post-processing; fixed BDF vertex ordering for 2nd order elements;
    replaced Mesh.ConstrainedBackgroundMesh with
    Mesh.CharacteristicLength{FromPoints,ExtendFromBoundary}; new Fields interface;
    control windows are now non-modal by default; new experimental 2D frontal
    algorithm; fixed various bugs.

    2.1.1 (Mar 1, 2008): small bug fixes (second order meshes, combine views, divide
    and conquer crash, ...).

    2.1.0 (Feb 23, 2008): new post-processing database; complete rewrite of
    post-processing drawing code; improved surface mesh algorithms; improved
    STEP/IGES/BREP support; new 3D mesh optimization algorithm; new default native
    file choosers; fixed 'could not find extruded vertex' in extrusions; many
    improvements and bug fixes all over the place.

    2.0.8 (Jul 13, 2007): unused vertices are not saved in mesh files anymore; new
    plugin GUI; automatic GUI font size selection; renamed
    Plugin(DecomposeInSimplex) into Plugin(MakeSimplex); reintroduced enhanced
    Plugin(SphericalRaise); clarified meshing algo names; new option to save groups
    of nodes in UNV meshes; new background mesh infrastructure; many small
    improvements and small bug fixes.

    2.0.7 (Apr 3, 2007): volumes can now be defined from external CAD surfaces;
    Delaunay/Tetgen algorithm is now used by default when available; re-added
    support for Plot3D structured mesh format; added ability to export external CAD
    models as GEO files (this only works for the limited set of geometrical
    primitives available in the GEO language, of course--so trying to convert e.g. a
    trimmed NURBS from a STEP file into a GEO file will fail); "lateral" entities
    are now added at the end of the list returned by extrusion commands; fixed
    various bugs.

    2.0 (Feb 5, 2007): new geometry and mesh databases, with support for STEP and
    IGES import via Open CASCADE; complete rewrite of geometry and mesh drawing
    code; complete rewrite of mesh I/O layer (with new native binary MSH format and
    support for import/export of I-deas UNV, Nastran BDF, STL, Medit MESH and VRML
    1.0 files); added support for incomplete second order elements; new 2D and 3D
    meshing algorithms; improved integration of Netgen and TetGen algorithms;
    removed anisotropic meshing algorithm (as well as attractors); removed explicit
    region number specification in extrusions; option changes in the graphical
    interface are now applied instantaneously; added support for offscreen rendering
    using OSMesa; added support for SVG output; added string labels for Physical
    entities; lots of other improvements all over the place.

    1.65 (May 15, 2006): new Plugin(ExtractEdges); fixed compilation errors with
    gcc4.1; replaced Plugin(DisplacementRaise) and Plugin(SphericalRaise) with the
    more flexible Plugin(Warp); better handling of discrete curves; new Status
    command in parser; added option to renumber nodes in .msh files (to avoid holes
    in the numbering sequence); fixed 2 special cases in quad->prism extrusion;
    fixed saving of 2nd order hexas with negative volume; small bug fixes and
    cleanups.

    1.64 (Mar 18, 2006): Windows versions do no depend on Cygwin anymore; various
    bug fixes and cleanups.

    1.63 (Feb 01, 2006): post-processing views can now be exported as meshes;
    improved background mesh handling (a lot faster, and more accurate); improved
    support for input images; new Plugin(ExtractElements); small bug fixes and
    enhancements.

    1.62 (Jan 15, 2006): new option to draw color gradients in the background;
    enhanced perspective projection mode; new "lasso" selection mode (same as
    "lasso" zoom, but in selection mode); new "invert selection" button in the
    visibility browser; new snapping grid when adding points in the GUI; nicer
    normal smoothing; new extrude syntax (old syntax still available, but
    deprecated); various small bug fixes and enhancements.

    1.61 (Nov 29, 2005): added support for second order (curved) elements in
    post-processor; new version (1.4) of post-processing file formats; new stippling
    options for 2D plots; removed limit on allowed number of files on command line;
    all "Combine" operations are now available in the parser; changed
    View.ArrowLocation into View.GlyphLocation; optimized memory usage when loading
    many (>1000) views; optimized loading and drawing of line meshes and 2D iso
    views; optimized handling of meshes with large number of physical entities;
    optimized vertex array creation for large post-processing views on
    Windows/Cygwin; removed Discrete Line and Discrete Surface commands (the same
    functionality can now be obtained by simply loading a mesh in .msh format);
    fixed coloring by mesh partition; added option to light wireframe meshes and
    views; new "mesh statistics" export format; new full-quad recombine option; new
    Plugin(ModulusPhase); hexas and prisms are now always saved with positive
    volume; improved interactive entity selection; new experimental Tetgen
    integration; new experimental STL remeshing algorithm; various small bug fixes
    and improvements.

    1.60 (Mar 15, 2005): added support for discrete curves; new Window menu on Mac
    OS X; generalized all octree-based plugins (CutGrid, StreamLines, Probe, etc.)
    to handle all element types (and not only scalar and vector
    triangles+tetrahedra); generalized Plugin(Evaluate), Plugin(Extract) and
    Plugin(Annotate); enhanced clipping plane interface; new grid/axes/rulers for 3D
    post-processing views (renamed the AbscissaName, NbAbscissa and AbscissaFormat
    options to more general names in the process); better automatic positioning of
    2D graphs; new manipulator dialog to specify rotations, translations and
    scalings "by hand"; various small enhancements and bug fixes.

    1.59 (Feb 06, 2005): added support for discrete (triangulated) surfaces, either
    in STL format or with the new "Discrete Surface" command; added STL and Text
    output format for post-processing views and STL output format for surface
    meshes; all levelset-based plugins can now also compute isovolumes; generalized
    Plugin(Evaluate) to handle external view data (based on the same or on a
    different mesh); generalized Plugin(CutGrid); new plugins (Eigenvalues,
    Gradient, Curl, Divergence); changed default colormap to match Matlab's "Jet"
    colormap; new transformation matrix option for views (for non-destructive
    rotations, symmetries, etc.); improved solver interface to keep the GUI
    responsive during solver calls; new C++ and Python solver examples; simplified
    Tools->Visibility GUI; transfinite lines with "Progression" now allow negative
    line numbers to reverse the progression; added ability to retrieve Gmsh's
    version number in the parser (to help write backward compatible scripts); fixed
    white space in unv mesh output; fixed various small bugs.

    1.58 (Jan 01, 2005): fixed UNIX socket interface on Windows (broken by the TCP
    solver patch in 1.57); bumped version number of default post-processing file
    formats to 1.3 (the only small modification is the handling of the end-of-string
    character for text2d and text3d objects in the ASCII format); new File->Rename
    menu; new colormaps+improved colormap handling; new color+min/max options in
    views; new GetValue() function to ask for values interactively in scripts;
    generalized For/EndFor loops in parser; new plugins (Annotate, Remove, Probe);
    new text attributes in views; renamed some shortcuts; fixed TeX output for large
    scenes; new option dialogs for various output formats; fixed many small memory
    leaks in parser; many small enhancements to polish the graphics and the user
    interface.

    1.57 (Dec 23, 2004): generalized displacement maps to display arbitrary view
    types; the arrows representing a vector field can now also be colored by the
    values from other scalar, vector or tensor fields; new adaptive high order
    visualization mode; new options (Solver.SocketCommand, Solver.NameCommand,
    View.ArrowSizeProportional, View.Normals, View.Tangents and General.ClipFactor);
    fixed display of undesired solver plugin popups; enhanced interactive plugin
    behavior; new plugins (HarmonicToTime, Integrate, Eigenvectors); tetrahedral
    mesh file reading speedup (50% faster on large meshes); large memory footprint
    reduction (up to 50%) for the visualization of triangular/tetrahedral meshes;
    the solver interface now supports TCP/IP connections; new generalized raise mode
    (allows to use complex expressions to offset post-processing maps); upgraded
    Netgen kernel to version 4.4; new optional TIME list in parsed views to specify
    the values of the time steps; several bug fixes in the Elliptic mesh algorithm;
    various other small bug fixes and enhancements.

    1.56 (Oct 17, 2004): new post-processing option to draw a scalar view raised by
    a displacement view without using Plugin(DisplacementRaise) (makes drawing
    arbitrary scalar fields on deformed meshes much easier); better post-processing
    menu (arbitrary number of views+scrollable+show view number); improved
    view->combine; new horizontal post-processing scales; new option to draw the
    mesh nodes per element; views can now also be saved in "parsed" format; fixed
    various path problems on Windows; small bug fixes.

    1.55 (Aug 21, 2004): added background mesh support for Triangle; meshes can now
    be displayed using "smoothed" normals (like post-processing views); added GUI
    for clipping planes; new interactive clipping/cutting plane definition;
    reorganized the Options GUI; enhanced 3D iso computation; enhanced lighting;
    many small bug fixes.

    1.54 (Jul 03, 2004): integrated Netgen (3D mesh quality optimization +
    alternative 3D algorithm); Extrude Surface now always automatically creates a
    new volume (in the same way Extrude Point or Extrude Line create new lines and
    surfaces, respectively); fixed UNV output; made the "Layers" region numbering
    consistent between lines, surfaces and volumes; fixed home directory problem on
    Win98; new Plugin(CutParametric); the default project file is now created in the
    home directory if no current directory is defined (e.g., when double-clicking on
    the icon on Windows/Mac); fixed the discrepancy between the orientation of
    geometrical surfaces and the associated surface meshes; added automatic
    orientation of surfaces in surface loops; generalized Plugin(Triangulate) to
    handle vector and tensor views; much nicer display of discrete iso-surfaces and
    custom ranges using smooth normals; small bug fixes and cleanups.

    1.53 (Jun 04, 2004): completed support for second order elements in the mesh
    module (line, triangles, quadrangles, tetrahedra, hexahedra, prisms and
    pyramids); various background mesh fixes and enhancements; major performance
    improvements in mesh and post-processing drawing routines (OpenGL vertex arrays
    for tri/quads); new Plugin(Evaluate) to evaluate arbitrary expressions on
    post-processing views; generalized Plugin(Extract) to handle any combination of
    components; generalized "Coherence" to handle transfinite surface/volume
    attributes; plugin options can now be set in the option file (like all other
    options); added "undo" capability during geometry creation; rewrote the contour
    guessing routines so that entities can be selected in an arbitrary order; Mac
    users can now double click on geo/msh/pos files in the Finder to launch Gmsh;
    removed support for FLTK 1.0; rewrote most of the code related to quadrangles;
    fixed 2d elliptic algorithm; removed all OpenGL display list code and options;
    fixed light positioning; new BoundingBox command to set the bounding box
    explicitly; added support for inexpensive "fake" transparency mode; many code
    cleanups.

    1.52 (May 06, 2004): new raster ("bitmap") PostScript/EPS/PDF output formats;
    new Plugin(Extract) to extract a given component from a post-processing view;
    new Plugin(CutGrid) and Plugin(StreamLines); improved mesh projection on
    non-planar surfaces; added support for second order tetrahedral elements; added
    interactive control of element order; refined mesh entity drawing selection (and
    renamed most of the corresponding options); enhanced log scale in
    post-processing; better font selection; simplified View.Raise{X,Y,Z} by removing
    the scaling; various bug fixes (default postscript printing mode, drawing of 3D
    arrows/cylinders on Linux, default home directory on Windows, default initial
    file browser directory, extrusion of points with non-normalized axes of
    rotation, computation of the scene bounding box in scripts, + the usual
    documentation updates).

    1.51 (Feb 29, 2004): initial support for visualizing mesh partitions; integrated
    version 2.0 of the MSH mesh file format; new option to compute post-processing
    ranges (min/max) per time step; Multiple views can now be combined into multi
    time step ones (e.g. for programs that generate data one time step at a time);
    new syntax: #var[] returns the size of the list var[]; enhanced "gmsh -convert";
    temporary and error files are now created in the home directory to avoid file
    permission issues; new 3D arrows; better lighting support; STL facets can now be
    converted into individual geometrical surfaces; many other small improvements
    and bug fixes (multi timestep tensors, color by physical entity, parser cleanup,
    etc.).

    1.50 (Dec 06, 2003): small changes to the visibility browser + made visibility
    scriptable (new Show/Hide commands); fixed (rare) crash when deleting views;
    split File->Open into File->Open and File->New to behave like most other
    programs; Mac versions now use the system menu bar by default (if possible);
    fixed bug leading to degenerate and/or duplicate tetrahedra in extruded meshes;
    fixed crash when reloading sms meshes.

    1.49 (Nov 30, 2003): made Merge, Save and Print behave like Include (i.e., open
    files in the same directory as the main project file if the path is relative);
    new Plugin(DecomposeInSimplex); new option View.AlphaChannel to set the
    transparency factor globally for a post-processing view; new "Combine Views"
    command; various bug fixes and cleanups.

    1.48 (Nov 23, 2003): new DisplacementRaise plugin to plot arbitrary fields on
    deformed meshes; generalized CutMap, CutPlane, CutSphere and Skin plugins to
    handle all kinds of elements and fields; new "Save View[n]" command to save
    views from a script; many small bug fixes (configure tests for libpng, handling
    of erroneous options, multi time step scalar prism drawings, copy of surface
    mesh attributes, etc.).

    1.47 (Nov 12, 2003): fixed extrusion of surfaces defined by only two curves; new
    syntax to retrieve point coordinates and indices of entities created through
    geometrical transformations; new PDF and compressed PostScript output formats;
    fixed numbering of elements created with "Extrude Point/Line"; use $GMSH_HOME as
    home directory if defined.

    1.46 (Aug 23, 2003): fixed crash for very long command lines; new options for
    setting the displacement factor and Triangle's parameters + renamed a couple of
    options to more sensible names (View.VectorType, View.ArrowSize); various small
    bug fixes; documentation update.

    1.45 (Jun 14, 2003): small bug fixes (min/max computation for tensor views,
    missing physical points in read mesh, "jumping" geometry during interactive
    manipulation of large models, etc.); variable definition speedup; restored
    support for second order elements in one- and two-dimensional meshes;
    documentation updates.

    1.44 (Apr 21, 2003): new reference manual; added support for PNG output; fixed
    small configure script bugs.

    1.43 (Mar 28, 2003): fixed solver interface problem on Mac OS X; new option to
    specify the interactive rotation center (default is now the pseudo "center of
    gravity" of the object, instead of (0,0,0)).

    1.42 (Mar 19, 2003): suppressed the automatic addition of a ".geo" extension if
    the file given on the command line is not recognized; added missing Layer option
    for Extrude Point; fixed various small bugs.

    1.41 (Mar 04, 2003): Gmsh is now licensed under the GNU General Public License;
    general code cleanup (indent).

    1.40 (Feb 26, 2003): various small bug fixes (mainly GSL-related).

    1.39 (Feb 23, 2003): removed all non-free routines; more build system work;
    implemented Von-Mises tensor display for all element types; fixed small GUI
    bugs.

    1.38 (Feb 17, 2003): fixed custom range selection for 3D iso graphs; new build
    system based on autoconf; new image reading code to import bitmaps as
    post-processing views.

    1.37 (Jan 25, 2003): generalized smoothing and cuts of post-processing views;
    better Windows integration (solvers, external editors, etc.); small bug fixes.

    1.36 (Nov 20, 2002): enhanced view duplication (one can now use "Duplicata
    View[num]" in the input file); merged all option dialogs in a new general option
    window; enhanced discoverability of the view option menus; new 3D point and line
    display; many small bug fixes and enhancements ("Print" format in parser,
    post-processing statistics, smooth normals, save window positions, restore
    default options, etc.).

    1.35 (Sep 11, 2002): graphical user interface upgraded to FLTK 1.1 (tooltips,
    new file chooser with multiple selection, full keyboard navigation, cut/paste of
    messages, etc.); colors can be now be directly assigned to mesh entities;
    initial tensor visualization; new keyboard animation (right/left arrow for time
    steps; up/down arrow for view cycling); new VRML output format for surface
    meshes; new plugin for spherical elevation plots; new post-processing file
    format (version 1.2) supporting quadrangles, hexahedra, prisms and pyramids;
    transparency is now enabled by default for post-processing plots; many small bug
    fixes (read mesh, ...).

    1.34 (Feb 18, 2002): improved surface mesh of non-plane surfaces; fixed
    orientation of elements in 2D anisotropic algorithm; minor user interface polish
    and additions (mostly in post-processing options); various small bug fixes.

    1.33 (Jan 24, 2002): new parameterizable solver interface (allowing up to 5
    user-defined solvers); enhanced 2D aniso algorithm; 3D initial mesh speedup.

    1.32 (Oct 04, 2001): new visibility browser; better floating point exception
    checks; fixed infinite looping when merging meshes in project files; various
    small clean ups (degenerate 2D extrusion, view->reload, ...).

    1.31 (Nov 30, 2001): corrected ellipses; PostScript output update (better
    shading, new combined PS/LaTeX output format); more interface polish; fixed
    extra memory allocation in 2D meshes; Physical Volume handling in unv format;
    various small fixes.

    1.30 (Nov 16, 2001): interface polish; fix crash when extruding quadrangles.

    1.29 (Nov 12, 2001): translations and rotations can now be combined in
    extrusions; fixed coherence bug in Extrude Line; various small bug fixes and
    additions.

    1.28 (Oct 30, 2001): corrected the 'Using Progression' attribute for tranfinite
    meshes to actually match a real geometric progression; new Triangulate plugin;
    new 2D graphs (space+time charts); better performance of geometrical
    transformations (warning: the numbering of some automatically created entities
    has changed); new text primitives in post-processing views (file format updated
    to version 1.1); more robust mean plane computation and error checks; various
    other small additions and clean-ups.

    1.27 (Oct 05, 2001): added ability to extrude curves with Layers/Recombine
    attributes; new PointSize/LineWidth options; fixed For/EndFor loops in included
    files; fixed error messages (line numbers+file names) in loops and functions;
    made the automatic removal of duplicate geometrical entities optional
    (Geometry.AutoCoherence=0); various other small bug fixes and clean-ups.

    1.26 (Sep 06, 2001): enhanced 2D anisotropic mesh generator (metric
    intersections); fixed small bug in 3D initial mesh; added alternative syntax for
    built-in functions (for GetDP compatibility); added line element display; Gmsh
    now saves all the elements in the mesh if no physical groups are defined (or if
    Mesh.SaveAll=1).

    1.25 (Sep 01, 2001): fixed bug with mixed recombined/non-recombined extruded
    meshes; Linux versions are now build with no optimization, due to bugs in gcc
    2.95.X.

    1.24 (Aug 30, 2001): fixed characteristic length interpolation for Splines;
    fixed edge swapping bug in 3D initial mesh; fixed degenerated case in
    geometrical extrusion (ruled surface with 3 borders); fixed generation of
    degenerated hexahedra and prisms for recombined+extruded meshes; added BSplines
    creation in the GUI; integrated Jonathan Shewchuk's Triangle as an alternative
    isotropic 2D mesh generator; added AngleSmoothNormals to control sharp edge
    display with smoothed normals; fixed random crash for lighted 3D iso surfaces.

    1.23 (Aug, 2001): fixed duplicate elements generation + non-matching tetrahedra
    faces in 3D extruded meshes; better display of displacement maps; fixed
    interactive ellipsis construction; generalized boundary operator; added new
    explode option for post-processing views; enhanced link view behavior (to update
    only the changed items); added new default plugins: Skin, Transform, Smooth;
    fixed various other small bugs (mostly in the post-processing module and for
    extruded meshes).

    1.22 (Aug 03, 2001): fixed (yet another) bug for 2D mesh in the mean plane;
    fixed surface coherence bug in extruded meshes; new double logarithmic scale,
    saturate value and smoothed normals option for post-processing views; plugins
    are now enabled by default; three new experimental statically linked plugins:
    CutMap (extracts a given iso surface from a 3D scalar map), CutPlane (cuts a 3D
    scalar map with a plane section), CutSphere (cuts a 3D scalar map with a
    sphere); various other bug fixes, additions and clean-ups.

    1.21 (Jul 25, 2001): fixed more memory leaks; added -opt command line option to
    parse definitions directly from the command line; fixed missing screen refreshes
    during contour/surface/volume selection; enhanced string manipulation functions
    (Sprintf, StrCat, StrPrefix); many other small fixes and clean-ups.

    1.20 (Jun 14, 2001): fixed various bugs (memory leaks, functions in included
    files, solver command selection, ColorTable option, duplicate nodes in extruded
    meshes (not finished yet), infinite loop on empty views, orientation of
    recombined quadrangles, ...); reorganized the interface menus; added constrained
    background mesh and mesh visibility options; added mesh quality histograms;
    changed default mesh colors; reintegrated the old command-line extrusion mesh
    generator.

    1.19 (May 07, 2001): fixed seg. fault for scalar simplex post-processing; new
    Solver menu; interface for GetDP solver through sockets; fixed multiple scale
    alignment; added some options + full option descriptions.

    1.18 (Apr 26, 2001): fixed many small bugs and incoherences in post-processing;
    fixed broken background mesh in 1D mesh generation.

    1.17 (Apr 17, 2001): corrected physical points saving; fixed parsing of DOS
    files (carriage return problems); easier geometrical selections (cursor change);
    plugin manager; enhanced variable arrays (sublist selection and affectation);
    line loop check; New arrow display; reduced number of 'fatal' errors + better
    handling in interactive mode; fixed bug when opening meshes; enhanced File->Open
    behavior for meshes and post-processing views.

    1.16 (Feb 26, 2001): added single/double buffer selection (only useful for Unix
    versions of Gmsh run from remote hosts without GLX); fixed a bug for recent
    versions of the opengl32.dll on Windows, which caused OpenGL fonts not to show
    up.

    1.15 (Feb 23, 2001): added automatic visibility setting during entity selection;
    corrected geometrical extrusion bug.

    1.14 (Feb 17, 2001): corrected a few bugs in the GUI (most of them were
    introduced in 1.13); added interactive color selection; made the option database
    bidirectional (i.e. scripts now correctly update the GUI); default options can
    now be saved and automatically reloaded at startup; made some changes to the
    scripting syntax (PostProcessing.View[n] becomes View[n]; Offset0 becomes
    OffsetX, etc.); corrected the handling of simple triangular surfaces with large
    characteristic lengths in the 2D isotropic algorithm; added an ASCII to binary
    post-processing view converter.

    1.13 (Feb 09, 2001): added support for JPEG output on Windows.

    1.12: corrected vector lines in the post-processing parsed format; corrected
    animation on Windows; corrected file creation in scripts on Windows; direct
    affectation of variable arrays.

    1.11 (Feb 07, 2001): corrected included file loading problem.

    1.10 (Feb 04, 2001): switched from Motif to FLTK for the GUI. Many small tweaks.

    1.00 (Jan 15, 2001): added PPM and YUV output; corrected nested If/Endif;
    Corrected several bugs for pixel output and enhanced GIF output (dithering,
    transparency); slightly changed the post-processing file format to allow both
    single and double precision numbers.

    0.999 (Dec 20, 2000): added JPEG output and easy MPEG generation (see t8.geo in
    the tutorial); clean up of export functions; small fixes; Linux versions are now
    compiled with gcc 2.95.2, which should fix the problems encountered with
    Mandrake 7.2.

    0.998 (Dec 19, 2000): corrected bug introduced in 0.997 in the generation of the
    initial 3D mesh.

    0.997 (Dec 14, 2000): corrected bug in interactive surface/volume selection;
    Added interactive symmetry; corrected geometrical extrusion with rotation in
    degenerated or partially degenerated cases; corrected bug in 2D mesh when
    meshing in the mean plane.

    0.996: arrays of variables; enhanced Printf and Sprintf; Simplified options
    (suppression of option arrays).

    0.995 (Dec 11, 2000): totally rewritten geometrical database (performance has
    been drastically improved for all geometrical transformations, and most notably
    for extrusion). As a consequence, the internal numbering of geometrical entities
    has changed: this will cause incompatibilities with old .geo files, and will
    require a partial rewrite of your old .geo files if these files made use of
    geometrical transformations. The syntax of the .geo file has also been
    clarified. Many additions for scripting purposes. New extrusion mesh
    generator. Preliminary version of the coupling between extruded and Delaunay
    meshes. New option and procedural database. All interactive operations can be
    scripted in the input files. See the last example in the tutorial for an
    example. Many stability enhancements in the 2D and 3D mesh
    algorithms. Performance boost of the 3D algorithm. Gmsh is still slow, but the
    performance becomes acceptable. An average 1000 tetrahedra/second is obtained on
    a 600Mhz computer for a mesh of one million tetrahedra. New anisotropic 2D mesh
    algorithm. New (ASCII and binary) post-processing file format and clarified mesh
    file format. New handling for interactive rotations (trackball mode). New
    didactic interactive mesh construction (watch the Delaunay algorithm in real
    time on complex geometries: that's exciting ;-). And many, many bug fixes and
    cleanups.

    0.992 (Nov 13, 2000): corrected recombined extrusion; corrected ellipses; added
    simple automatic animation of post-processing maps; fixed various bugs.

    0.991 (Oct 24, 2000): fixed a serious allocation bug in 2D algorithm, which
    caused random crashes. All users should upgrade to 0.991.

    0.990: bug fix in non-recombined 3D transfinite meshes.

    0.989 (Sep 01, 2000): added ability to reload previously saved meshes; some new
    command line options; reorganization of the scale menu; GIF output.

    0.987: fixed bug with smoothing (leading to the possible generation of erroneous
    3d meshes); corrected bug for mixed 3D meshes; moved the 'toggle view link'
    option to Opt->Postprocessing_Options.

    0.986: fixed overlay problems; SGI version should now also run on 32 bits
    machines; fixed small 3d mesh bug.

    0.985: corrected colormap bug on HP, SUN, SGI and IBM versions; corrected small
    initialization bug in postscript output.

    0.984: corrected bug in display lists; added some options in Opt->General.

    0.983: corrected some seg. faults in interactive mode; corrected bug in
    rotations; changed default window sizes for better match with 1024x768 screens
    (default X resources can be changed: see ex03.geo).

    0.982: lighting for mesh and post-processing; corrected 2nd order mesh on non
    plane surfaces; added example 13.

Next: License, Previous: Version history, Up: Top

## Appendix G Copyright and credits

                     Gmsh is copyright (C) 1997-2015

                           Christophe Geuzaine
                         <cgeuzaine at ulg.ac.be>

                                   and

                          Jean-Francois Remacle
                  <jean-francois.remacle at uclouvain.be>

    Code contributions to Gmsh have been provided by David Colignon (colormaps),
    Emilie Marchandise (compound geometrical entities), Gaetan Bricteux (Gauss
    integration and levelsets), Jacques Lechelle (DIFFPACK mesh format), Jonathan
    Lambrechts (fields, solver), Jozef Vesely (help with Tetgen integration), Koen
    Hillewaert (high order elements, generalized periodic meshes), Laurent Stainier
    (eigenvalue solvers, tensor display and MacOS bits), Marc Ume (original list
    code), Mark van Doesburg (Open CASCADE face connection), Matt Gundry (Plot3d
    mesh format), Matti Pellikka (Cell complex and Homology solver), Nicolas Tardieu
    (help with Netgen integration), Pascale Noyret (MED mesh format), Pierre Badel
    (root finding and minimization), Ruth Sabariego (pyramids), Stephen Guzik (CGNS
    and partitioners), Bastien Gorissen (parallel remote post-processing), Eric
    Bechet (solver), Gilles Marckmann (camera and stero mode), Ashish Negi
    (Salome/Netgen CAD healing), Trevor Strickler (structured/unstructured coupling
    with pyramids), Amaury Johnen (Bezier), Benjamin Ruard (Java wrappers), Maxime
    Graulich (iOS/Android port), Francois Henrotte (onelab metamodels), Sebastian
    Eiser (PGF output), Alexis Salzman (compressed IO). See comments in the sources
    for more information. If we forgot to list your contributions please send us an
    email!

    The AVL tree code (Common/avl.*) and the YUV image code (Graphics/gl2yuv.*) are
    copyright (C) 1988-1993, 1995 The Regents of the University of
    California. Permission to use, copy, modify, and distribute this software and
    its documentation for any purpose and without fee is hereby granted, provided
    that the above copyright notice appear in all copies and that both that
    copyright notice and this permission notice appear in supporting documentation,
    and that the name of the University of California not be used in advertising or
    publicity pertaining to distribution of the software without specific, written
    prior permission. The University of California makes no representations about
    the suitability of this software for any purpose. It is provided "as is" without
    express or implied warranty.

    The trackball code (Graphics/Trackball.*) is copyright (C) 1993, 1994, Silicon
    Graphics, Inc. ALL RIGHTS RESERVED. Permission to use, copy, modify, and
    distribute this software for any purpose and without fee is hereby granted,
    provided that the above copyright notice appear in all copies and that both the
    copyright notice and this permission notice appear in supporting documentation,
    and that the name of Silicon Graphics, Inc. not be used in advertising or
    publicity pertaining to distribution of the software without specific, written
    prior permission.

    The GIF and PPM routines (Graphics/gl2gif.cpp) are based on code copyright (C)
    1989, 1991, Jef Poskanzer. Permission to use, copy, modify, and distribute this
    software and its documentation for any purpose and without fee is hereby
    granted, provided that the above copyright notice appear in all copies and that
    both that copyright notice and this permission notice appear in supporting
    documentation.  This software is provided "as is" without express or implied
    warranty.

    The colorbar widget (Fltk/Colorbar_Window.cpp) was inspired by code from the
    Vis5d program for visualizing five dimensional gridded data sets, copyright (C)
    1990-1995, Bill Hibbard, Brian Paul, Dave Santek, and Andre Battaiola.

    This version of Gmsh may contain code (in the contrib/ANN subdirectory)
    copyright (C) 1997-2005 University of Maryland and Sunil Arya and David Mount:
    check the configuration options.

    This version of Gmsh may contain code (in the contrib/Chaco subdirectory)
    written by Bruce Hendrickson and Robert Leland at Sandia National Laboratories
    under US Department of Energy contract DE-AC04-76DP00789 and is copyrighted by
    Sandia Corporation: check the configuration options.

    This version of Gmsh may contain code (in the contrib/gmm subdirectory)
    copyright (C) 2002-2008 Yves Renard: check the configuration options.

    This version of Gmsh may contain code (in the contrib/kbipack subdirectory)
    copyright (C) 2005 Saku Suuriniemi: check the configuration options.

    This version of Gmsh may contain code (in the contrib/MathEx subdirectory) based
    in part on the work of the SSCILIB Library, copyright (C) 2000-2003 Sadao
    Massago: check the configuration options.

    This version of Gmsh may contain code (in the contrib/Metis subdirectory)
    written by George Karypis (karypis at cs.umn.edu), copyright (C) 1998 Regents of
    the University of Minnesota: check the configuration options.

    This version of Gmsh may contain code (in the contrib/mpeg_encode subdirectory)
    copyright (c) 1995 The Regents of the University of California: check the
    configuration options.

    This version of Gmsh may contain code (in the contrib/Netgen subdirectory)
    copyright (C) 1994-2004 Joachim Sch"oberl: check the configuration options.

    This version of Gmsh may contain code (in the contrib/Tetgen subdirectory)
    copyright (C) 2002-2007 Hang Si: check the configuration options.

    This version of Gmsh may contain code (in the contrib/Salome subdirectory)
    copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT, EDF R& D, LEG,
    PRINCIPIA R& D, BUREAU VERITAS: check the configuration options.

    This version of Gmsh may contain code (in the contrib/bamg subdirectory) from
    Freefem++ copyright (C) Frederic Hecht: check the configuration options.

    This version of Gmsh may contain code (in the contrib/lbfgs subdirectory) (C)
    Sergey Bochkanov (ALGLIB project): check the configuration options.

    This version of Gmsh may contain code (in the contrib/mmg3d subdirectory) from
    MMG3D Version 4.0 (C) 2004-2011 Cecile Dobrzynski and Pascal Frey (IPB - UPMC -
    INRIA): check the configuration options.

    This version of Gmsh may contain code (in the contrib/Blossom subdirectory)
    copyright (C) 1995-1997 Bill Cook et al.: check the configuration options.

    Special thanks to Bill Spitzak, Michael Sweet, Matthias Melcher, Greg Ercolano
    and others for the Fast Light Tool Kit on which Gmsh's GUI is based. See
    http://www.fltk.org for more info on this excellent object-oriented,
    cross-platform toolkit.

    Special thanks also to EDF for funding the Open CASCADE and MED integration.

    Thanks to the following folks who have contributed by providing fresh ideas on
    theoretical or programming topics, who have sent patches, requests for changes
    or improvements, or who gave us access to exotic machines for testing Gmsh: Juan
    Abanto, Olivier Adam, Guillaume Alleon, Laurent Champaney, Pascal Dupuis,
    Patrick Dular, Philippe Geuzaine, Johan Gyselinck, Francois Henrotte, Benoit
    Meys, Nicolas Moes, Osamu Nakamura, Chad Schmutzer, Jean-Luc Fl'ejou, Xavier
    Dardenne, Christophe Prud'homme, Sebastien Clerc, Jose Miguel Pasini, Philippe
    Lussou, Jacques Kools, Bayram Yenikaya, Peter Hornby, Krishna Mohan Gundu,
    Christopher Stott, Timmy Schumacher, Carl Osterwisch, Bruno Frackowiak, Philip
    Kelleners, Romuald Conty, Renaud Sizaire, Michel Benhamou, Tom De Vuyst, Kris
    Van den Abeele, Simon Vun, Simon Corbin, Thomas De-Soza, Marcus Drosson, Antoine
    Dechaume, Jose Paulo Moitinho de Almeida, Thomas Pinchard, Corrado Chisari, Axel
    Hackbarth, Peter Wainwright, Jiri Hnidek, Thierry Thomas, Konstantinos Poulios,
    Laurent Van Miegroet, Shahrokh Ghavamian, Geordie McBain, Jose Paulo Moitinho de
    Almeida, Guillaume Demesy, Wendy Merks-Swolfs, Cosmin Stefan Deaconu, Nigel
    Nunn, Serban Georgescu.

Next: Concept index, Previous: Copyright and credits, Up: Top

## Appendix H License

    Gmsh is provided under the terms of the GNU General Public License
    (GPL), Version 2 or later, with the following exception:

      The copyright holders of Gmsh give you permission to combine Gmsh
      with code included in the standard release of TetGen (from Hang
      Si), Netgen (from Joachim Sch"oberl), Chaco (from Bruce Hendrickson
      and Robert Leland at Sandia National Laboratories), METIS (from
      George Karypis at the University of Minnesota) and OpenCASCADE
      (from Open CASCADE S.A.S) under their respective licenses. You may
      copy and distribute such a system following the terms of the GNU
      GPL for Gmsh and the licenses of the other code concerned, provided
      that you include the source code of that other code when and as the
      GNU GPL requires distribution of source code.

      Note that people who make modified versions of Gmsh are not
      obligated to grant this special exception for their modified
      versions; it is their choice whether to do so. The GNU General
      Public License gives permission to release a modified version
      without this exception; this exception also makes it possible to
      release a modified version which carries forward this exception.

    End of exception.

    		    GNU GENERAL PUBLIC LICENSE
    		       Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

    			    Preamble

      The licenses for most software are designed to take away your
    freedom to share and change it.  By contrast, the GNU General Public
    License is intended to guarantee your freedom to share and change free
    software--to make sure the software is free for all its users.  This
    General Public License applies to most of the Free Software
    Foundation's software and to any other program whose authors commit to
    using it.  (Some other Free Software Foundation software is covered by
    the GNU Library General Public License instead.)  You can apply it to
    your programs, too.

      When we speak of free software, we are referring to freedom, not
    price.  Our General Public Licenses are designed to make sure that you
    have the freedom to distribute copies of free software (and charge for
    this service if you wish), that you receive source code or can get it
    if you want it, that you can change the software or use pieces of it
    in new free programs; and that you know you can do these things.

      To protect your rights, we need to make restrictions that forbid
    anyone to deny you these rights or to ask you to surrender the rights.
    These restrictions translate to certain responsibilities for you if you
    distribute copies of the software, or if you modify it.

      For example, if you distribute copies of such a program, whether
    gratis or for a fee, you must give the recipients all the rights that
    you have.  You must make sure that they, too, receive or can get the
    source code.  And you must show them these terms so they know their
    rights.

      We protect your rights with two steps: (1) copyright the software, and
    (2) offer you this license which gives you legal permission to copy,
    distribute and/or modify the software.

      Also, for each author's protection and ours, we want to make certain
    that everyone understands that there is no warranty for this free
    software.  If the software is modified by someone else and passed on, we
    want its recipients to know that what they have is not the original, so
    that any problems introduced by others will not reflect on the original
    authors' reputations.

      Finally, any free program is threatened constantly by software
    patents.  We wish to avoid the danger that redistributors of a free
    program will individually obtain patent licenses, in effect making the
    program proprietary.  To prevent this, we have made it clear that any
    patent must be licensed for everyone's free use or not licensed at all.

      The precise terms and conditions for copying, distribution and
    modification follow.

    		    GNU GENERAL PUBLIC LICENSE
       TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

      0. This License applies to any program or other work which contains
    a notice placed by the copyright holder saying it may be distributed
    under the terms of this General Public License.  The "Program", below,
    refers to any such program or work, and a "work based on the Program"
    means either the Program or any derivative work under copyright law:
    that is to say, a work containing the Program or a portion of it,
    either verbatim or with modifications and/or translated into another
    language.  (Hereinafter, translation is included without limitation in
    the term "modification".)  Each licensee is addressed as "you".

    Activities other than copying, distribution and modification are not
    covered by this License; they are outside its scope.  The act of
    running the Program is not restricted, and the output from the Program
    is covered only if its contents constitute a work based on the
    Program (independent of having been made by running the Program).
    Whether that is true depends on what the Program does.

      1. You may copy and distribute verbatim copies of the Program's
    source code as you receive it, in any medium, provided that you
    conspicuously and appropriately publish on each copy an appropriate
    copyright notice and disclaimer of warranty; keep intact all the
    notices that refer to this License and to the absence of any warranty;
    and give any other recipients of the Program a copy of this License
    along with the Program.

    You may charge a fee for the physical act of transferring a copy, and
    you may at your option offer warranty protection in exchange for a fee.

      2. You may modify your copy or copies of the Program or any portion
    of it, thus forming a work based on the Program, and copy and
    distribute such modifications or work under the terms of Section 1
    above, provided that you also meet all of these conditions:

        a) You must cause the modified files to carry prominent notices
        stating that you changed the files and the date of any change.

        b) You must cause any work that you distribute or publish, that in
        whole or in part contains or is derived from the Program or any
        part thereof, to be licensed as a whole at no charge to all third
        parties under the terms of this License.

        c) If the modified program normally reads commands interactively
        when run, you must cause it, when started running for such
        interactive use in the most ordinary way, to print or display an
        announcement including an appropriate copyright notice and a
        notice that there is no warranty (or else, saying that you provide
        a warranty) and that users may redistribute the program under
        these conditions, and telling the user how to view a copy of this
        License.  (Exception: if the Program itself is interactive but
        does not normally print such an announcement, your work based on
        the Program is not required to print an announcement.)

    These requirements apply to the modified work as a whole.  If
    identifiable sections of that work are not derived from the Program,
    and can be reasonably considered independent and separate works in
    themselves, then this License, and its terms, do not apply to those
    sections when you distribute them as separate works.  But when you
    distribute the same sections as part of a whole which is a work based
    on the Program, the distribution of the whole must be on the terms of
    this License, whose permissions for other licensees extend to the
    entire whole, and thus to each and every part regardless of who wrote it.

    Thus, it is not the intent of this section to claim rights or contest
    your rights to work written entirely by you; rather, the intent is to
    exercise the right to control the distribution of derivative or
    collective works based on the Program.

    In addition, mere aggregation of another work not based on the Program
    with the Program (or with a work based on the Program) on a volume of
    a storage or distribution medium does not bring the other work under
    the scope of this License.

      3. You may copy and distribute the Program (or a work based on it,
    under Section 2) in object code or executable form under the terms of
    Sections 1 and 2 above provided that you also do one of the following:

        a) Accompany it with the complete corresponding machine-readable
        source code, which must be distributed under the terms of Sections
        1 and 2 above on a medium customarily used for software interchange; or,

        b) Accompany it with a written offer, valid for at least three
        years, to give any third party, for a charge no more than your
        cost of physically performing source distribution, a complete
        machine-readable copy of the corresponding source code, to be
        distributed under the terms of Sections 1 and 2 above on a medium
        customarily used for software interchange; or,

        c) Accompany it with the information you received as to the offer
        to distribute corresponding source code.  (This alternative is
        allowed only for noncommercial distribution and only if you
        received the program in object code or executable form with such
        an offer, in accord with Subsection b above.)

    The source code for a work means the preferred form of the work for
    making modifications to it.  For an executable work, complete source
    code means all the source code for all modules it contains, plus any
    associated interface definition files, plus the scripts used to
    control compilation and installation of the executable.  However, as a
    special exception, the source code distributed need not include
    anything that is normally distributed (in either source or binary
    form) with the major components (compiler, kernel, and so on) of the
    operating system on which the executable runs, unless that component
    itself accompanies the executable.

    If distribution of executable or object code is made by offering
    access to copy from a designated place, then offering equivalent
    access to copy the source code from the same place counts as
    distribution of the source code, even though third parties are not
    compelled to copy the source along with the object code.

      4. You may not copy, modify, sublicense, or distribute the Program
    except as expressly provided under this License.  Any attempt
    otherwise to copy, modify, sublicense or distribute the Program is
    void, and will automatically terminate your rights under this License.
    However, parties who have received copies, or rights, from you under
    this License will not have their licenses terminated so long as such
    parties remain in full compliance.

      5. You are not required to accept this License, since you have not
    signed it.  However, nothing else grants you permission to modify or
    distribute the Program or its derivative works.  These actions are
    prohibited by law if you do not accept this License.  Therefore, by
    modifying or distributing the Program (or any work based on the
    Program), you indicate your acceptance of this License to do so, and
    all its terms and conditions for copying, distributing or modifying
    the Program or works based on it.

      6. Each time you redistribute the Program (or any work based on the
    Program), the recipient automatically receives a license from the
    original licensor to copy, distribute or modify the Program subject to
    these terms and conditions.  You may not impose any further
    restrictions on the recipients' exercise of the rights granted herein.
    You are not responsible for enforcing compliance by third parties to
    this License.

      7. If, as a consequence of a court judgment or allegation of patent
    infringement or for any other reason (not limited to patent issues),
    conditions are imposed on you (whether by court order, agreement or
    otherwise) that contradict the conditions of this License, they do not
    excuse you from the conditions of this License.  If you cannot
    distribute so as to satisfy simultaneously your obligations under this
    License and any other pertinent obligations, then as a consequence you
    may not distribute the Program at all.  For example, if a patent
    license would not permit royalty-free redistribution of the Program by
    all those who receive copies directly or indirectly through you, then
    the only way you could satisfy both it and this License would be to
    refrain entirely from distribution of the Program.

    If any portion of this section is held invalid or unenforceable under
    any particular circumstance, the balance of the section is intended to
    apply and the section as a whole is intended to apply in other
    circumstances.

    It is not the purpose of this section to induce you to infringe any
    patents or other property right claims or to contest validity of any
    such claims; this section has the sole purpose of protecting the
    integrity of the free software distribution system, which is
    implemented by public license practices.  Many people have made
    generous contributions to the wide range of software distributed
    through that system in reliance on consistent application of that
    system; it is up to the author/donor to decide if he or she is willing
    to distribute software through any other system and a licensee cannot
    impose that choice.

    This section is intended to make thoroughly clear what is believed to
    be a consequence of the rest of this License.

      8. If the distribution and/or use of the Program is restricted in
    certain countries either by patents or by copyrighted interfaces, the
    original copyright holder who places the Program under this License
    may add an explicit geographical distribution limitation excluding
    those countries, so that distribution is permitted only in or among
    countries not thus excluded.  In such case, this License incorporates
    the limitation as if written in the body of this License.

      9. The Free Software Foundation may publish revised and/or new versions
    of the General Public License from time to time.  Such new versions will
    be similar in spirit to the present version, but may differ in detail to
    address new problems or concerns.

    Each version is given a distinguishing version number.  If the Program
    specifies a version number of this License which applies to it and "any
    later version", you have the option of following the terms and conditions
    either of that version or of any later version published by the Free
    Software Foundation.  If the Program does not specify a version number of
    this License, you may choose any version ever published by the Free Software
    Foundation.

      10. If you wish to incorporate parts of the Program into other free
    programs whose distribution conditions are different, write to the author
    to ask for permission.  For software which is copyrighted by the Free
    Software Foundation, write to the Free Software Foundation; we sometimes
    make exceptions for this.  Our decision will be guided by the two goals
    of preserving the free status of all derivatives of our free software and
    of promoting the sharing and reuse of software generally.

    			    NO WARRANTY

      11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
    FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
    OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
    PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
    OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
    TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
    PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
    REPAIR OR CORRECTION.

      12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
    WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
    REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
    INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
    OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
    TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
    YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
    PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGES.

    		     END OF TERMS AND CONDITIONS

    	    How to Apply These Terms to Your New Programs

      If you develop a new program, and you want it to be of the greatest
    possible use to the public, the best way to achieve this is to make it
    free software which everyone can redistribute and change under these terms.

      To do so, attach the following notices to the program.  It is safest
    to attach them to the start of each source file to most effectively
    convey the exclusion of warranty; and each file should have at least
    the "copyright" line and a pointer to where the full notice is found.

        <one line to give the program's name and a brief idea of what it does.>
        Copyright (C) <year>  <name of author>

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; either version 2 of the License, or
        (at your option) any later version.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.

        You should have received a copy of the GNU General Public License
        along with this program; if not, write to the Free Software
        Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Also add information on how to contact you by electronic and paper mail.

    If the program is interactive, make it output a short notice like this
    when it starts in an interactive mode:

        Gnomovision version 69, Copyright (C) year name of author
        Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
        This is free software, and you are welcome to redistribute it
        under certain conditions; type `show c' for details.

    The hypothetical commands `show w' and `show c' should show the appropriate
    parts of the General Public License.  Of course, the commands you use may
    be called something other than `show w' and `show c'; they could even be
    mouse-clicks or menu items--whatever suits your program.

    You should also get your employer (if you work as a programmer) or your
    school, if any, to sign a "copyright disclaimer" for the program, if
    necessary.  Here is a sample; alter the names:

      Yoyodyne, Inc., hereby disclaims all copyright interest in the program
      `Gnomovision' (which makes passes at compilers) written by James Hacker.

      <signature of Ty Coon>, 1 April 1989
      Ty Coon, President of Vice

    This General Public License does not permit incorporating your program into
    proprietary programs.  If your program is a subroutine library, you may
    consider it more useful to permit linking proprietary applications with the
    library.  If this is what you want to do, use the GNU Library General
    Public License instead of this License.

Next: Syntax index, Previous: License, Up: Top

## Concept index

- 2D plots: Post-processing module
- 3D plots: Post-processing module
- Acknowledgments: Copyright and credits
- Authors, e-mail: Bug reports
- Background mesh: Specifying mesh element sizes
- Binary operators: Operators
- Bindings, keyboard: Keyboard shortcuts
- Bindings, mouse: Mouse actions
- Bugs, reporting: Bug reports
- Changelog: Version history
- Characteristic lengths: Specifying mesh element sizes
- Colors: Color expressions
- Command-line options: Command-line options
- Commands, general: General commands
- Commands, geometry: Geometry commands
- Commands, mesh: Mesh commands
- Commands, post-processing: Post-processing commands
- Comments: Comments
- Concepts, index: Concept index
- Conditionals: Loops and conditionals
- Constants: Expressions
- Contact information: Bug reports
- Contributors, list: Copyright and credits
- Copyright: Copyright and credits
- Copyright: Copying conditions
- Credits: Copyright and credits
- Developer, information: Information for developers
- Document syntax: Syntactic rules
- Download: Obtaining Gmsh
- E-mail, authors: Bug reports
- Elementary lines: Lines
- Elementary points: Points
- Elementary surfaces: Surfaces
- Elementary volumes: Volumes
- Evaluation order: Operators
- Examples: Tutorial
- Expressions, affectation: General commands
- Expressions, character: Character expressions
- Expressions, color: Color expressions
- Expressions, definition: Expressions
- Expressions, floating point: Floating point expressions
- Expressions, identifiers: General commands
- Expressions, lists: Floating point expressions
- Extrusion, geometry: Extrusions
- Extrusion, mesh: Structured grids
- FAQ: Frequently asked questions
- File format, mesh: MSH ASCII file format
- File formats: File formats
- File, comments: Comments
- Floating point numbers: Floating point expressions
- Frequently asked questions: Frequently asked questions
- Functions, built-in: Built-in functions
- General commands: General commands
- Geometry commands: Geometry commands
- Geometry, extrusion: Extrusions
- Geometry, module: Geometry module
- Geometry, options: Geometry options
- Geometry, transformations: Transformations
- Graphs: Post-processing module
- History, versions: Version history
- Index, concepts: Concept index
- Index, syntax: Syntax index
- Interactive mode: Interactive mode
- Internet address: Obtaining Gmsh
- Introduction: Overview
- Keyboard, shortcuts: Keyboard shortcuts
- Keywords, index: Syntax index
- License: Copying conditions
- License: License
- Lines, elementary: Lines
- Lines, physical: Lines
- Loops: Loops and conditionals
- Macros, user-defined: User-defined macros
- Mailing list: Bug reports
- Mesh commands: Mesh commands
- Mesh, background: Specifying mesh element sizes
- Mesh, element size: Specifying mesh element sizes
- Mesh, extrusion: Structured grids
- Mesh, file format: MSH ASCII file format
- Mesh, module: Mesh module
- Mesh, options: Mesh options
- Mesh, transfinite: Structured grids
- Module, geometry: Geometry module
- Module, Mesh: Mesh module
- Module, Post-processing: Post-processing module
- Module, Solver: Solver module
- Mouse, actions: Mouse actions
- MSH file: MSH ASCII file format
- Nodes, ordering: Node ordering
- Non-interactive mode: Non-interactive mode
- Numbers, real: Floating point expressions
- Operating system: Running Gmsh on your system
- Operator precedence: Operators
- Operators, definition: Operators
- Options, command-line: Command-line options
- Options, geometry: Geometry options
- Options, geometry: Solver options
- Options, mesh: Mesh options
- Options, post-processing: Post-processing options
- Order, evaluation: Operators
- Overview: Overview
- Physical lines: Lines
- Physical points: Points
- Physical surfaces: Surfaces
- Physical volumes: Volumes
- Plots: Post-processing module
- Plugins, post-processing: Post-processing plugins
- Points, elementary: Points
- Points, physical: Points
- Post-processing commands: Post-processing commands
- Post-processing plugins: Post-processing plugins
- Post-processing, module: Post-processing module
- Post-processing, options: Post-processing options
- Precedence, operators: Operators
- Programming, notes: Information for developers
- Questions, frequently asked: Frequently asked questions
- Real numbers: Floating point expressions
- Reporting bugs: Bug reports
- Rotation: Transformations
- Rules, syntactic: Syntactic rules
- Running Gmsh: Running Gmsh on your system
- Scale: Transformations
- Shortcuts, keyboard: Keyboard shortcuts
- Size, elements: Specifying mesh element sizes
- Solver commands: Solver options
- Solver, module: Solver module
- Strings: Character expressions
- Surfaces, elementary: Surfaces
- Surfaces, physical: Surfaces
- Symmetry: Transformations
- Syntax, index: Syntax index
- Syntax, rules: Syntactic rules
- Ternary operators: Operators
- Transfinite, mesh: Structured grids
- Transformations, geometry: Transformations
- Translation: Transformations
- Tutorial: Tutorial
- Unary operators: Operators
- Versions: Version history
- Views: Post-processing module
- Volumes, elementary: Volumes
- Volumes, physical: Volumes
- Web site: Obtaining Gmsh

Previous: Concept index, Up: Top

## Syntax index

- `!`: Operators
- `!=`: Operators
- `%`: Operators
- `&&`: Operators
- `()`: Operators
- `*`: Operators
- `*=`: General commands
- `+`: Operators
- `++`: Operators
- `+=`: General commands
- `-`: Operators
- `-, -parse_and_exit`: Command-line options
- `--`: Operators
- `-0`: Command-line options
- `-1, -2, -3`: Command-line options
- `-=`: General commands
- `-a, -g, -m, -s, -p`: Command-line options
- `-algo string`: Command-line options
- `-anisoMax float`: Command-line options
- `-bg file`: Command-line options
- `-bgm file`: Command-line options
- `-bin`: Command-line options
- `-camera`: Command-line options
- `-check`: Command-line options
- `-clcurv`: Command-line options
- `-clmax float`: Command-line options
- `-clmin float`: Command-line options
- `-clscale float`: Command-line options
- `-combine`: Command-line options
- `-convert files`: Command-line options
- `-display string`: Command-line options
- `-epslc1d`: Command-line options
- `-fontsize int`: Command-line options
- `-format string`: Command-line options
- `-gamepad`: Command-line options
- `-help`: Command-line options
- `-ho_[min,max,nlayers]`: Command-line options
- `-ignorePartBound`: Command-line options
- `-info`: Command-line options
- `-link int`: Command-line options
- `-listen`: Command-line options
- `-match`: Command-line options
- `-merge`: Command-line options
- `-minterpreter string`: Command-line options
- `-n`: Command-line options
- `-new`: Command-line options
- `-nodb`: Command-line options
- `-nopopup`: Command-line options
- `-numsubedges`: Command-line options
- `-o file`: Command-line options
- `-open`: Command-line options
- `-optimize[_netgen]`: Command-line options
- `-optimize_ho`: Command-line options
- `-optimize_lloyd`: Command-line options
- `-option file`: Command-line options
- `-order int`: Command-line options
- `-parametric`: Command-line options
- `-part int`: Command-line options
- `-partWeight tri|quad|tet|prism|hex int`: Command-line options
- `-pid`: Command-line options
- `-pyinterpreter string`: Command-line options
- `-rand float`: Command-line options
- `-refine`: Command-line options
- `-run`: Command-line options
- `-saveall`: Command-line options
- `-setnumber name value`: Command-line options
- `-setstring name value`: Command-line options
- `-smooth int`: Command-line options
- `-smoothRatio float`: Command-line options
- `-stereo`: Command-line options
- `-string "string"`: Command-line options
- `-swapangle`: Command-line options
- `-theme string`: Command-line options
- `-tol float`: Command-line options
- `-v int`: Command-line options
- `-version`: Command-line options
- `-watch pattern`: Command-line options
- `/`: Operators
- `/*, */`: Comments
- `//`: Comments
- `/=`: General commands
- `:`: Operators
- `<`: Operators
- `< Recursive > Color` color-expression`{ Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous mesh commands
- `< Recursive > Hide { Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous geometry commands
- `< Recursive > Hide { Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous mesh commands
- `< Recursive > Show { Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous geometry commands
- `< Recursive > Show { Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous mesh commands
- `<=`: Operators
- `=`: General commands
- `==`: Operators
- `>`: Operators
- `>=`: Operators
- `?`: Operators
- `^`: Operators
- `Abort;`: General commands
- `Acos (` expression`)`: Built-in functions
- `AdaptMesh {` expression-list`} {` expression-list`} { {` expression-list`< , ... > } };`: General commands
- `Alias View[`expression`];`: Post-processing commands
- `AliasWithOptions View[`expression`];`: Post-processing commands
- `Asin (` expression`)`: Built-in functions
- `Atan (` expression`)`: Built-in functions
- `Atan2 (` expression`,` expression`)`: Built-in functions
- `Attractor`: Specifying mesh element sizes
- `AttractorAnisoCurve`: Specifying mesh element sizes
- `Background Field =` expression`;`: Specifying mesh element sizes
- `Background Mesh View[`expression`];`: Post-processing commands
- `Ball`: Specifying mesh element sizes
- `Boundary {` transform-list`}`: Transformations
- `BoundaryLayer`: Specifying mesh element sizes
- `BoundingBox {` expression`,` expression`,` expression`,` expression`,` expression`,` expression`};`: General commands
- `BoundingBox;`: General commands
- `Box`: Specifying mesh element sizes
- `BSpline (` expression`) = {` expression-list`};`: Lines
- build-in-function: Built-in functions
- `Call` string`;`: User-defined macros
- `CatmullRom (` expression`) = {` expression-list`};`: Lines
- `Ceil (` expression`)`: Built-in functions
- `Centerline`: Specifying mesh element sizes
- char-option`=` char-expression`;`: General commands
- `Characteristic Length {` expression-list`} =` expression`;`: Specifying mesh element sizes
- `Circle (` expression`) = {` expression`,` expression`,` expression`};`: Lines
- `Coherence Mesh;`: Miscellaneous mesh commands
- `Coherence;`: Miscellaneous geometry commands
- `Cohomology ( {` expression-list`} ) { {` expression-list`} , {` expression-list`} };`: Miscellaneous mesh commands
- color-option`=` color-expression`;`: General commands
- `Combine ElementsByViewName;`: Post-processing commands
- `Combine ElementsFromAllViews | Combine Views;`: Post-processing commands
- `Combine ElementsFromVisibleViews;`: Post-processing commands
- `Combine TimeStepsByViewName | Combine TimeSteps;`: Post-processing commands
- `Combine TimeStepsFromAllViews;`: Post-processing commands
- `Combine TimeStepsFromVisibleViews;`: Post-processing commands
- `CombinedBoundary {` transform-list`}`: Transformations
- `Compound Line (` expression`) = {` expression-list`};`: Lines
- `Compound Surface (` expression`) = {` expression-list`} < Boundary { {` expression-list`}, {` expression-list`}, {` expression-list`}, {` expression-list`} } > ;`: Surfaces
- `Compound Volume (` expression`) = {` expression-list`};`: Volumes
- `CopyOptions View[`expression`,` expression`];`: Post-processing commands
- `Cos (` expression`)`: Built-in functions
- `Cosh (` expression`)`: Built-in functions
- `Cpu`: General commands
- `CreateDir` char-expression`;`: Miscellaneous mesh commands
- `Curvature`: Specifying mesh element sizes
- `Cylinder`: Specifying mesh element sizes
- `DefineConstant[` string`=` expression`|`char-expression`<, ...>];`: General commands
- `DefineConstant[` string`= {` expression`|`char-expression`,` onelab-options`} <, ...>];`: General commands
- `Delete Empty Views;`: Post-processing commands
- `Delete Model;`: General commands
- `Delete Options;`: General commands
- `Delete Physicals;`: General commands
- `Delete` string`;`: General commands
- `Delete Variables;`: General commands
- `Delete View[`expression`];`: Post-processing commands
- `Delete { Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous geometry commands
- `Dilate { {` expression-list`},` expression`} {` transform-list`}`: Transformations
- `Draw;`: General commands
- `Ellipse (` expression`) = {` expression`,` expression`,` expression`,` expression`};`: Lines
- `ENABLE_3M`: Compiling the source code
- `ENABLE_ACIS`: Compiling the source code
- `ENABLE_ANN`: Compiling the source code
- `ENABLE_BAMG`: Compiling the source code
- `ENABLE_BFGS`: Compiling the source code
- `ENABLE_BLAS_LAPACK`: Compiling the source code
- `ENABLE_BLOSSOM`: Compiling the source code
- `ENABLE_BUILD_ANDROID`: Compiling the source code
- `ENABLE_BUILD_DYNAMIC`: Compiling the source code
- `ENABLE_BUILD_IOS`: Compiling the source code
- `ENABLE_BUILD_LIB`: Compiling the source code
- `ENABLE_BUILD_SHARED`: Compiling the source code
- `ENABLE_CAIRO`: Compiling the source code
- `ENABLE_CGNS`: Compiling the source code
- `ENABLE_CHACO`: Compiling the source code
- `ENABLE_COMPRESSED_IO`: Compiling the source code
- `ENABLE_DINTEGRATION`: Compiling the source code
- `ENABLE_FLTK`: Compiling the source code
- `ENABLE_FOURIER_MODEL`: Compiling the source code
- `ENABLE_GMM`: Compiling the source code
- `ENABLE_GRAPHICS`: Compiling the source code
- `ENABLE_KBIPACK`: Compiling the source code
- `ENABLE_MATHEX`: Compiling the source code
- `ENABLE_MED`: Compiling the source code
- `ENABLE_MESH`: Compiling the source code
- `ENABLE_METIS`: Compiling the source code
- `ENABLE_MMG3D`: Compiling the source code
- `ENABLE_MPEG_ENCODE`: Compiling the source code
- `ENABLE_MPI`: Compiling the source code
- `ENABLE_MSVC_STATIC_RUNTIME`: Compiling the source code
- `ENABLE_MUMPS`: Compiling the source code
- `ENABLE_NATIVE_FILE_CHOOSER`: Compiling the source code
- `ENABLE_NETGEN`: Compiling the source code
- `ENABLE_NUMPY`: Compiling the source code
- `ENABLE_OCC`: Compiling the source code
- `ENABLE_ONELAB`: Compiling the source code
- `ENABLE_ONELAB2`: Compiling the source code
- `ENABLE_ONELAB_METAMODEL`: Compiling the source code
- `ENABLE_OPENMP`: Compiling the source code
- `ENABLE_OPTHOM`: Compiling the source code
- `ENABLE_OS_SPECIFIC_INSTALL`: Compiling the source code
- `ENABLE_OSMESA`: Compiling the source code
- `ENABLE_PARSER`: Compiling the source code
- `ENABLE_PETSC`: Compiling the source code
- `ENABLE_PETSC4PY`: Compiling the source code
- `ENABLE_PLUGINS`: Compiling the source code
- `ENABLE_POPPLER`: Compiling the source code
- `ENABLE_POST`: Compiling the source code
- `ENABLE_QT`: Compiling the source code
- `ENABLE_RTREE`: Compiling the source code
- `ENABLE_SALOME`: Compiling the source code
- `ENABLE_SGEOM`: Compiling the source code
- `ENABLE_SLEPC`: Compiling the source code
- `ENABLE_SOLVER`: Compiling the source code
- `ENABLE_TAUCS`: Compiling the source code
- `ENABLE_TCMALLOC`: Compiling the source code
- `ENABLE_TETGEN`: Compiling the source code
- `ENABLE_TETGEN_OLD`: Compiling the source code
- `ENABLE_VORO3D`: Compiling the source code
- `ENABLE_WRAP_JAVA`: Compiling the source code
- `ENABLE_WRAP_PYTHON`: Compiling the source code
- `EndFor`: Loops and conditionals
- `EndIf`: Loops and conditionals
- `Error (` char-expression`<,` expression-list`> );`: General commands
- `Exit;`: General commands
- `Exp (` expression`)`: Built-in functions
- extrude: Extrusions
- `Extrude {` expression-list`} {` extrude-list`}`: Extrusions
- `Extrude {` expression-list`} {` extrude-list layers`}`: Structured grids
- `Extrude { Surface {` expression-list`};` layers`< Using Index[`expr`]; > < Using View[`expr`]; > < ScaleLastLayer; > }`: Structured grids
- `Extrude { {` expression-list`}, {` expression-list`},` expression`} {` extrude-list layers`}`: Structured grids
- `Extrude { {` expression-list`}, {` expression-list`},` expression`} {` extrude-list`}`: Extrusions
- `Extrude { {` expression-list`}, {` expression-list`}, {` expression-list`},` expression`} {` extrude-list layers`}`: Structured grids
- `Extrude { {` expression-list`}, {` expression-list`}, {` expression-list`},` expression`} {` extrude-list`}`: Extrusions
- `Fabs (` expression`)`: Built-in functions
- `Field[`expression`] =` string`;`: Specifying mesh element sizes
- `Field[`expression`].`string`=` char-expression`|` expression`|` expression-list`;`: Specifying mesh element sizes
- `Floor (` expression`)`: Built-in functions
- `Fmod (` expression`,` expression`)`: Built-in functions
- `For (` expression`:` expression`)`: Loops and conditionals
- `For (` expression`:` expression`:` expression`)`: Loops and conditionals
- `For` string `In {` expression`:` expression`:` expression`}`: Loops and conditionals
- `For` string `In {` expression`:` expression`}`: Loops and conditionals
- `Frustum`: Specifying mesh element sizes
- `General.AlphaBlending`: General options list
- `General.Antialiasing`: General options list
- `General.ArrowHeadRadius`: General options list
- `General.ArrowStemLength`: General options list
- `General.ArrowStemRadius`: General options list
- `General.Axes`: General options list
- `General.AxesAutoPosition`: General options list
- `General.AxesForceValue`: General options list
- `General.AxesFormatX`: General options list
- `General.AxesFormatY`: General options list
- `General.AxesFormatZ`: General options list
- `General.AxesLabelX`: General options list
- `General.AxesLabelY`: General options list
- `General.AxesLabelZ`: General options list
- `General.AxesMaxX`: General options list
- `General.AxesMaxY`: General options list
- `General.AxesMaxZ`: General options list
- `General.AxesMikado`: General options list
- `General.AxesMinX`: General options list
- `General.AxesMinY`: General options list
- `General.AxesMinZ`: General options list
- `General.AxesTicsX`: General options list
- `General.AxesTicsY`: General options list
- `General.AxesTicsZ`: General options list
- `General.AxesValueMaxX`: General options list
- `General.AxesValueMaxY`: General options list
- `General.AxesValueMaxZ`: General options list
- `General.AxesValueMinX`: General options list
- `General.AxesValueMinY`: General options list
- `General.AxesValueMinZ`: General options list
- `General.BackgroundGradient`: General options list
- `General.BackgroundImage3D`: General options list
- `General.BackgroundImageFileName`: General options list
- `General.BackgroundImageHeight`: General options list
- `General.BackgroundImagePage`: General options list
- `General.BackgroundImagePositionX`: General options list
- `General.BackgroundImagePositionY`: General options list
- `General.BackgroundImageWidth`: General options list
- `General.BoundingBoxSize`: General options list
- `General.Camera`: General options list
- `General.CameraAperture`: General options list
- `General.CameraEyeSeparationRatio`: General options list
- `General.CameraFocalLengthRatio`: General options list
- `General.Clip0A`: General options list
- `General.Clip0B`: General options list
- `General.Clip0C`: General options list
- `General.Clip0D`: General options list
- `General.Clip1A`: General options list
- `General.Clip1B`: General options list
- `General.Clip1C`: General options list
- `General.Clip1D`: General options list
- `General.Clip2A`: General options list
- `General.Clip2B`: General options list
- `General.Clip2C`: General options list
- `General.Clip2D`: General options list
- `General.Clip3A`: General options list
- `General.Clip3B`: General options list
- `General.Clip3C`: General options list
- `General.Clip3D`: General options list
- `General.Clip4A`: General options list
- `General.Clip4B`: General options list
- `General.Clip4C`: General options list
- `General.Clip4D`: General options list
- `General.Clip5A`: General options list
- `General.Clip5B`: General options list
- `General.Clip5C`: General options list
- `General.Clip5D`: General options list
- `General.ClipFactor`: General options list
- `General.ClipOnlyDrawIntersectingVolume`: General options list
- `General.ClipOnlyVolume`: General options list
- `General.ClipPositionX`: General options list
- `General.ClipPositionY`: General options list
- `General.ClipWholeElements`: General options list
- `General.Color.AmbientLight`: General options list
- `General.Color.Axes`: General options list
- `General.Color.Background`: General options list
- `General.Color.BackgroundGradient`: General options list
- `General.Color.DiffuseLight`: General options list
- `General.Color.Foreground`: General options list
- `General.Color.SmallAxes`: General options list
- `General.Color.SpecularLight`: General options list
- `General.Color.Text`: General options list
- `General.ColorScheme`: General options list
- `General.ConfirmOverwrite`: General options list
- `General.ContextPositionX`: General options list
- `General.ContextPositionY`: General options list
- `General.DefaultFileName`: General options list
- `General.DetachedMenu`: General options list
- `General.Display`: General options list
- `General.DisplayBorderFactor`: General options list
- `General.DoubleBuffer`: General options list
- `General.DrawBoundingBoxes`: General options list
- `General.ErrorFileName`: General options list
- `General.ExecutableFileName`: General options list
- `General.ExpertMode`: General options list
- `General.ExtraHeight`: General options list
- `General.ExtraPositionX`: General options list
- `General.ExtraPositionY`: General options list
- `General.ExtraWidth`: General options list
- `General.FastRedraw`: General options list
- `General.FieldHeight`: General options list
- `General.FieldPositionX`: General options list
- `General.FieldPositionY`: General options list
- `General.FieldWidth`: General options list
- `General.FileChooserPositionX`: General options list
- `General.FileChooserPositionY`: General options list
- `General.FileName`: General options list
- `General.FltkColorScheme`: General options list
- `General.FltkTheme`: General options list
- `General.FontSize`: General options list
- `General.GraphicsFont`: General options list
- `General.GraphicsFontEngine`: General options list
- `General.GraphicsFontSize`: General options list
- `General.GraphicsFontSizeTitle`: General options list
- `General.GraphicsFontTitle`: General options list
- `General.GraphicsHeight`: General options list
- `General.GraphicsPositionX`: General options list
- `General.GraphicsPositionY`: General options list
- `General.GraphicsWidth`: General options list
- `General.HighOrderToolsPositionX`: General options list
- `General.HighOrderToolsPositionY`: General options list
- `General.HighResolutionGraphics`: General options list
- `General.HighResolutionPointSizeFactor`: General options list
- `General.InitialModule`: General options list
- `General.Light0`: General options list
- `General.Light0W`: General options list
- `General.Light0X`: General options list
- `General.Light0Y`: General options list
- `General.Light0Z`: General options list
- `General.Light1`: General options list
- `General.Light1W`: General options list
- `General.Light1X`: General options list
- `General.Light1Y`: General options list
- `General.Light1Z`: General options list
- `General.Light2`: General options list
- `General.Light2W`: General options list
- `General.Light2X`: General options list
- `General.Light2Y`: General options list
- `General.Light2Z`: General options list
- `General.Light3`: General options list
- `General.Light3W`: General options list
- `General.Light3X`: General options list
- `General.Light3Y`: General options list
- `General.Light3Z`: General options list
- `General.Light4`: General options list
- `General.Light4W`: General options list
- `General.Light4X`: General options list
- `General.Light4Y`: General options list
- `General.Light4Z`: General options list
- `General.Light5`: General options list
- `General.Light5W`: General options list
- `General.Light5X`: General options list
- `General.Light5Y`: General options list
- `General.Light5Z`: General options list
- `General.LineWidth`: General options list
- `General.ManipulatorPositionX`: General options list
- `General.ManipulatorPositionY`: General options list
- `General.MaxX`: General options list
- `General.MaxY`: General options list
- `General.MaxZ`: General options list
- `General.MenuHeight`: General options list
- `General.MenuPositionX`: General options list
- `General.MenuPositionY`: General options list
- `General.MenuWidth`: General options list
- `General.MessageFontSize`: General options list
- `General.MessageHeight`: General options list
- `General.MinX`: General options list
- `General.MinY`: General options list
- `General.MinZ`: General options list
- `General.MouseHoverMeshes`: General options list
- `General.MouseSelection`: General options list
- `General.NonModalWindows`: General options list
- `General.NoPopup`: General options list
- `General.OptionsFileName`: General options list
- `General.OptionsPositionX`: General options list
- `General.OptionsPositionY`: General options list
- `General.Orthographic`: General options list
- `General.PluginHeight`: General options list
- `General.PluginPositionX`: General options list
- `General.PluginPositionY`: General options list
- `General.PluginWidth`: General options list
- `General.PointSize`: General options list
- `General.PolygonOffsetAlwaysOn`: General options list
- `General.PolygonOffsetFactor`: General options list
- `General.PolygonOffsetUnits`: General options list
- `General.ProgressMeterStep`: General options list
- `General.QuadricSubdivisions`: General options list
- `General.RecentFile0`: General options list
- `General.RecentFile1`: General options list
- `General.RecentFile2`: General options list
- `General.RecentFile3`: General options list
- `General.RecentFile4`: General options list
- `General.RecentFile5`: General options list
- `General.RecentFile6`: General options list
- `General.RecentFile7`: General options list
- `General.RecentFile8`: General options list
- `General.RecentFile9`: General options list
- `General.RotationCenterGravity`: General options list
- `General.RotationCenterX`: General options list
- `General.RotationCenterY`: General options list
- `General.RotationCenterZ`: General options list
- `General.RotationX`: General options list
- `General.RotationY`: General options list
- `General.RotationZ`: General options list
- `General.SaveOptions`: General options list
- `General.SaveSession`: General options list
- `General.ScaleX`: General options list
- `General.ScaleY`: General options list
- `General.ScaleZ`: General options list
- `General.SessionFileName`: General options list
- `General.Shininess`: General options list
- `General.ShininessExponent`: General options list
- `General.SmallAxes`: General options list
- `General.SmallAxesPositionX`: General options list
- `General.SmallAxesPositionY`: General options list
- `General.SmallAxesSize`: General options list
- `General.StatisticsPositionX`: General options list
- `General.StatisticsPositionY`: General options list
- `General.Stereo`: General options list
- `General.SystemMenuBar`: General options list
- `General.Terminal`: General options list
- `General.TextEditor`: General options list
- `General.TmpFileName`: General options list
- `General.Tooltips`: General options list
- `General.Trackball`: General options list
- `General.TrackballHyperbolicSheet`: General options list
- `General.TrackballQuaternion0`: General options list
- `General.TrackballQuaternion1`: General options list
- `General.TrackballQuaternion2`: General options list
- `General.TrackballQuaternion3`: General options list
- `General.TranslationX`: General options list
- `General.TranslationY`: General options list
- `General.TranslationZ`: General options list
- `General.VectorType`: General options list
- `General.Verbosity`: General options list
- `General.VisibilityPositionX`: General options list
- `General.VisibilityPositionY`: General options list
- `General.WatchFilePattern`: General options list
- `General.ZoomFactor`: General options list
- `Geometry.AutoCoherence`: Geometry options list
- `Geometry.Clip`: Geometry options list
- `Geometry.Color.HighlightOne`: Geometry options list
- `Geometry.Color.HighlightTwo`: Geometry options list
- `Geometry.Color.HighlightZero`: Geometry options list
- `Geometry.Color.Lines`: Geometry options list
- `Geometry.Color.Normals`: Geometry options list
- `Geometry.Color.Points`: Geometry options list
- `Geometry.Color.Projection`: Geometry options list
- `Geometry.Color.Selection`: Geometry options list
- `Geometry.Color.Surfaces`: Geometry options list
- `Geometry.Color.Tangents`: Geometry options list
- `Geometry.Color.Volumes`: Geometry options list
- `Geometry.CopyDisplayAttributes`: Geometry options list
- `Geometry.CopyMeshingMethod`: Geometry options list
- `Geometry.DoubleClickedEntityTag`: Geometry options list
- `Geometry.DoubleClickedLineCommand`: Geometry options list
- `Geometry.DoubleClickedPointCommand`: Geometry options list
- `Geometry.DoubleClickedSurfaceCommand`: Geometry options list
- `Geometry.DoubleClickedVolumeCommand`: Geometry options list
- `Geometry.ExactExtrusion`: Geometry options list
- `Geometry.ExtrudeReturnLateralEntities`: Geometry options list
- `Geometry.ExtrudeSplinePoints`: Geometry options list
- `Geometry.HideCompounds`: Geometry options list
- `Geometry.HighlightOrphans`: Geometry options list
- `Geometry.LabelType`: Geometry options list
- `Geometry.Light`: Geometry options list
- `Geometry.LightTwoSide`: Geometry options list
- `Geometry.LineNumbers`: Geometry options list
- `Geometry.Lines`: Geometry options list
- `Geometry.LineSelectWidth`: Geometry options list
- `Geometry.LineType`: Geometry options list
- `Geometry.LineWidth`: Geometry options list
- `Geometry.MatchGeomAndMesh`: Geometry options list
- `Geometry.Normals`: Geometry options list
- `Geometry.NumSubEdges`: Geometry options list
- `Geometry.OCCConnectFaces`: Geometry options list
- `Geometry.OCCFixDegenerated`: Geometry options list
- `Geometry.OCCFixSmallEdges`: Geometry options list
- `Geometry.OCCFixSmallFaces`: Geometry options list
- `Geometry.OCCScaling`: Geometry options list
- `Geometry.OCCSewFaces`: Geometry options list
- `Geometry.OffsetX`: Geometry options list
- `Geometry.OffsetY`: Geometry options list
- `Geometry.OffsetZ`: Geometry options list
- `Geometry.OldCircle`: Geometry options list
- `Geometry.OldNewReg`: Geometry options list
- `Geometry.OldRuledSurface`: Geometry options list
- `Geometry.OrientedPhysicals`: Geometry options list
- `Geometry.PointNumbers`: Geometry options list
- `Geometry.Points`: Geometry options list
- `Geometry.PointSelectSize`: Geometry options list
- `Geometry.PointSize`: Geometry options list
- `Geometry.PointType`: Geometry options list
- `Geometry.ScalingFactor`: Geometry options list
- `Geometry.SnapX`: Geometry options list
- `Geometry.SnapY`: Geometry options list
- `Geometry.SnapZ`: Geometry options list
- `Geometry.SurfaceNumbers`: Geometry options list
- `Geometry.Surfaces`: Geometry options list
- `Geometry.SurfaceType`: Geometry options list
- `Geometry.Tangents`: Geometry options list
- `Geometry.Tolerance`: Geometry options list
- `Geometry.Transform`: Geometry options list
- `Geometry.TransformXX`: Geometry options list
- `Geometry.TransformXY`: Geometry options list
- `Geometry.TransformXZ`: Geometry options list
- `Geometry.TransformYX`: Geometry options list
- `Geometry.TransformYY`: Geometry options list
- `Geometry.TransformYZ`: Geometry options list
- `Geometry.TransformZX`: Geometry options list
- `Geometry.TransformZY`: Geometry options list
- `Geometry.TransformZZ`: Geometry options list
- `Geometry.VolumeNumbers`: Geometry options list
- `Geometry.Volumes`: Geometry options list
- `GMSH_MAJOR_VERSION`: General commands
- `GMSH_MINOR_VERSION`: General commands
- `GMSH_PATCH_VERSION`: General commands
- `Gradient`: Specifying mesh element sizes
- `Hide` char-expression`;`: Miscellaneous geometry commands
- `Hide` char-expression`;`: Miscellaneous mesh commands
- `Homology ( {` expression-list`} ) { {` expression-list`} , {` expression-list`} };`: Miscellaneous mesh commands
- `Hypot (` expression`,` expression`)`: Built-in functions
- `If (` expression`)`: Loops and conditionals
- `Include` char-expression`;`: General commands
- `IntersectAniso`: Specifying mesh element sizes
- `Laplacian`: Specifying mesh element sizes
- `Line (` expression`) = {` expression`,` expression`};`: Lines
- `Line Loop (` expression`) = {` expression-list`};`: Lines
- `Log (` expression`)`: Built-in functions
- `Log10 (` expression`)`: Built-in functions
- `LonLat`: Specifying mesh element sizes
- `Macro` string: User-defined macros
- `MathEval`: Specifying mesh element sizes
- `MathEvalAniso`: Specifying mesh element sizes
- `Max`: Specifying mesh element sizes
- `MaxEigenHessian`: Specifying mesh element sizes
- `Mean`: Specifying mesh element sizes
- `Memory`: General commands
- `Merge` char-expression`;`: General commands
- `Mesh` expression`;`: General commands
- `Mesh.Algorithm`: Mesh options list
- `Mesh.Algorithm3D`: Mesh options list
- `Mesh.AllowSwapAngle`: Mesh options list
- `Mesh.AngleSmoothNormals`: Mesh options list
- `Mesh.AnisoMax`: Mesh options list
- `Mesh.BdfFieldFormat`: Mesh options list
- `Mesh.Binary`: Mesh options list
- `Mesh.Bunin`: Mesh options list
- `Mesh.CgnsImportOrder`: Mesh options list
- `Mesh.ChacoArchitecture`: Mesh options list
- `Mesh.ChacoEigensolver`: Mesh options list
- `Mesh.ChacoEigTol`: Mesh options list
- `Mesh.ChacoGlobalMethod`: Mesh options list
- `Mesh.ChacoHypercubeDim`: Mesh options list
- `Mesh.ChacoLocalMethod`: Mesh options list
- `Mesh.ChacoMeshDim1`: Mesh options list
- `Mesh.ChacoMeshDim2`: Mesh options list
- `Mesh.ChacoMeshDim3`: Mesh options list
- `Mesh.ChacoParamINTERNAL_VERTICES`: Mesh options list
- `Mesh.ChacoParamREFINE_MAP`: Mesh options list
- `Mesh.ChacoParamREFINE_PARTITION`: Mesh options list
- `Mesh.ChacoParamTERMINAL_PROPOGATION`: Mesh options list
- `Mesh.ChacoPartitionSection`: Mesh options list
- `Mesh.ChacoSeed`: Mesh options list
- `Mesh.ChacoVMax`: Mesh options list
- `Mesh.CharacteristicLengthExtendFromBoundary`: Mesh options list
- `Mesh.CharacteristicLengthFactor`: Mesh options list
- `Mesh.CharacteristicLengthFromCurvature`: Mesh options list
- `Mesh.CharacteristicLengthFromPoints`: Mesh options list
- `Mesh.CharacteristicLengthMax`: Mesh options list
- `Mesh.CharacteristicLengthMin`: Mesh options list
- `Mesh.Clip`: Mesh options list
- `Mesh.Color.Eight`: Mesh options list
- `Mesh.Color.Eighteen`: Mesh options list
- `Mesh.Color.Eleven`: Mesh options list
- `Mesh.Color.Fifteen`: Mesh options list
- `Mesh.Color.Five`: Mesh options list
- `Mesh.Color.Four`: Mesh options list
- `Mesh.Color.Fourteen`: Mesh options list
- `Mesh.Color.Hexahedra`: Mesh options list
- `Mesh.Color.Lines`: Mesh options list
- `Mesh.Color.Nine`: Mesh options list
- `Mesh.Color.Nineteen`: Mesh options list
- `Mesh.Color.Normals`: Mesh options list
- `Mesh.Color.One`: Mesh options list
- `Mesh.Color.Points`: Mesh options list
- `Mesh.Color.PointsSup`: Mesh options list
- `Mesh.Color.Prisms`: Mesh options list
- `Mesh.Color.Pyramids`: Mesh options list
- `Mesh.Color.Quadrangles`: Mesh options list
- `Mesh.Color.Seven`: Mesh options list
- `Mesh.Color.Seventeen`: Mesh options list
- `Mesh.Color.Six`: Mesh options list
- `Mesh.Color.Sixteen`: Mesh options list
- `Mesh.Color.Tangents`: Mesh options list
- `Mesh.Color.Ten`: Mesh options list
- `Mesh.Color.Tetrahedra`: Mesh options list
- `Mesh.Color.Thirteen`: Mesh options list
- `Mesh.Color.Three`: Mesh options list
- `Mesh.Color.Triangles`: Mesh options list
- `Mesh.Color.Twelve`: Mesh options list
- `Mesh.Color.Two`: Mesh options list
- `Mesh.Color.Zero`: Mesh options list
- `Mesh.ColorCarousel`: Mesh options list
- `Mesh.CpuTime`: Mesh options list
- `Mesh.DoRecombinationTest`: Mesh options list
- `Mesh.DrawSkinOnly`: Mesh options list
- `Mesh.Dual`: Mesh options list
- `Mesh.ElementOrder`: Mesh options list
- `Mesh.Explode`: Mesh options list
- `Mesh.FlexibleTransfinite`: Mesh options list
- `Mesh.Format`: Mesh options list
- `Mesh.Hexahedra`: Mesh options list
- `Mesh.HighOrderNumLayers`: Mesh options list
- `Mesh.HighOrderOptimize`: Mesh options list
- `Mesh.HighOrderOptPrimSurfMesh`: Mesh options list
- `Mesh.HighOrderPoissonRatio`: Mesh options list
- `Mesh.HighOrderThresholdMax`: Mesh options list
- `Mesh.HighOrderThresholdMin`: Mesh options list
- `Mesh.IgnorePartitionBoundary`: Mesh options list
- `Mesh.LabelSampling`: Mesh options list
- `Mesh.LabelType`: Mesh options list
- `Mesh.LcIntegrationPrecision`: Mesh options list
- `Mesh.Light`: Mesh options list
- `Mesh.LightLines`: Mesh options list
- `Mesh.LightTwoSide`: Mesh options list
- `Mesh.LineNumbers`: Mesh options list
- `Mesh.Lines`: Mesh options list
- `Mesh.LineWidth`: Mesh options list
- `Mesh.Lloyd`: Mesh options list
- `Mesh.MeshOnlyVisible`: Mesh options list
- `Mesh.MetisAlgorithm`: Mesh options list
- `Mesh.MetisEdgeMatching`: Mesh options list
- `Mesh.MetisRefinementAlgorithm`: Mesh options list
- `Mesh.MinimumCirclePoints`: Mesh options list
- `Mesh.MinimumCurvePoints`: Mesh options list
- `Mesh.MshFilePartitioned`: Mesh options list
- `Mesh.MshFileVersion`: Mesh options list
- `Mesh.NbHexahedra`: Mesh options list
- `Mesh.NbNodes`: Mesh options list
- `Mesh.NbPartitions`: Mesh options list
- `Mesh.NbPrisms`: Mesh options list
- `Mesh.NbPyramids`: Mesh options list
- `Mesh.NbQuadrangles`: Mesh options list
- `Mesh.NbTetrahedra`: Mesh options list
- `Mesh.NbTriangles`: Mesh options list
- `Mesh.NewtonConvergenceTestXYZ`: Mesh options list
- `Mesh.Normals`: Mesh options list
- `Mesh.NumSubEdges`: Mesh options list
- `Mesh.Optimize`: Mesh options list
- `Mesh.OptimizeNetgen`: Mesh options list
- `Mesh.Partitioner`: Mesh options list
- `Mesh.PartitionHexWeight`: Mesh options list
- `Mesh.PartitionPrismWeight`: Mesh options list
- `Mesh.PartitionPyramidWeight`: Mesh options list
- `Mesh.PartitionQuadWeight`: Mesh options list
- `Mesh.PartitionTetWeight`: Mesh options list
- `Mesh.PartitionTriWeight`: Mesh options list
- `Mesh.PointNumbers`: Mesh options list
- `Mesh.Points`: Mesh options list
- `Mesh.PointSize`: Mesh options list
- `Mesh.PointType`: Mesh options list
- `Mesh.Prisms`: Mesh options list
- `Mesh.Pyramids`: Mesh options list
- `Mesh.Quadrangles`: Mesh options list
- `Mesh.QualityInf`: Mesh options list
- `Mesh.QualitySup`: Mesh options list
- `Mesh.QualityType`: Mesh options list
- `Mesh.RadiusInf`: Mesh options list
- `Mesh.RadiusSup`: Mesh options list
- `Mesh.RandomFactor`: Mesh options list
- `Mesh.RecombinationAlgorithm`: Mesh options list
- `Mesh.RecombinationTestHorizStart`: Mesh options list
- `Mesh.RecombinationTestNewStrat`: Mesh options list
- `Mesh.RecombinationTestNoGreedyStrat`: Mesh options list
- `Mesh.Recombine3DAll`: Mesh options list
- `Mesh.RecombineAll`: Mesh options list
- `Mesh.RefineSteps`: Mesh options list
- `Mesh.RemeshAlgorithm`: Mesh options list
- `Mesh.RemeshParametrization`: Mesh options list
- `Mesh.Remove4Triangles`: Mesh options list
- `Mesh.ReverseAllNormals`: Mesh options list
- `Mesh.SaveAll`: Mesh options list
- `Mesh.SaveElementTagType`: Mesh options list
- `Mesh.SaveGroupsOfNodes`: Mesh options list
- `Mesh.SaveParametric`: Mesh options list
- `Mesh.ScalingFactor`: Mesh options list
- `Mesh.SecondOrderExperimental`: Mesh options list
- `Mesh.SecondOrderIncomplete`: Mesh options list
- `Mesh.SecondOrderLinear`: Mesh options list
- `Mesh.SmoothCrossField`: Mesh options list
- `Mesh.Smoothing`: Mesh options list
- `Mesh.SmoothNormals`: Mesh options list
- `Mesh.SmoothRatio`: Mesh options list
- `Mesh.SubdivisionAlgorithm`: Mesh options list
- `Mesh.SurfaceEdges`: Mesh options list
- `Mesh.SurfaceFaces`: Mesh options list
- `Mesh.SurfaceNumbers`: Mesh options list
- `Mesh.SwitchElementTags`: Mesh options list
- `Mesh.Tangents`: Mesh options list
- `Mesh.Tetrahedra`: Mesh options list
- `Mesh.ToleranceEdgeLength`: Mesh options list
- `Mesh.ToleranceInitialDelaunay`: Mesh options list
- `Mesh.Triangles`: Mesh options list
- `Mesh.VolumeEdges`: Mesh options list
- `Mesh.VolumeFaces`: Mesh options list
- `Mesh.VolumeNumbers`: Mesh options list
- `Mesh.Voronoi`: Mesh options list
- `Mesh.ZoneDefinition`: Mesh options list
- `Min`: Specifying mesh element sizes
- `MinAniso`: Specifying mesh element sizes
- `Modulo (` expression`,` expression`)`: Built-in functions
- `MPI_Rank`: General commands
- `MPI_Size`: General commands
- `newl`: General commands
- `newll`: General commands
- `NewModel;`: General commands
- `newp`: General commands
- `newreg`: General commands
- `news`: General commands
- `newsl`: General commands
- `newv`: General commands
- `NonBlockingSystemCall` char-expression`;`: General commands
- operator-binary: Operators
- operator-ternary-left: Operators
- operator-ternary-right: Operators
- operator-unary-left: Operators
- operator-unary-right: Operators
- `Param`: Specifying mesh element sizes
- `Periodic Line {` expression-list`} = {` expression-list`} ;`: Miscellaneous mesh commands
- `Periodic Line | Surface {` expression-list`} = {` expression-list`} Affine | Rotate | Translate {` expression-list`} ;`: Miscellaneous mesh commands
- `Periodic Surface` expression`{` expression-list`} =` expression`{` expression-list`} ;`: Miscellaneous mesh commands
- `Physical Line (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`: Lines
- `Physical Point (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`: Points
- `Physical Surface (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`: Surfaces
- `Physical Volume (` expression`|` char-expression`<,` expression`> ) <+>= {` expression-list`};`: Volumes
- `Pi`: General commands
- `Plane Surface (` expression`) = {` expression-list`};`: Surfaces
- `Plugin (`string`) . Run;`: Post-processing commands
- `Plugin (`string`) .` string`=` expression`|` char-expression`;`: Post-processing commands
- `Plugin(AnalyseCurvedMesh)`: Post-processing plugins
- `Plugin(Annotate)`: Post-processing plugins
- `Plugin(Bubbles)`: Post-processing plugins
- `Plugin(Crack)`: Post-processing plugins
- `Plugin(Curl)`: Post-processing plugins
- `Plugin(CurvedBndDist)`: Post-processing plugins
- `Plugin(CutBox)`: Post-processing plugins
- `Plugin(CutGrid)`: Post-processing plugins
- `Plugin(CutParametric)`: Post-processing plugins
- `Plugin(CutPlane)`: Post-processing plugins
- `Plugin(CutSphere)`: Post-processing plugins
- `Plugin(DiscretizationError)`: Post-processing plugins
- `Plugin(Distance)`: Post-processing plugins
- `Plugin(Divergence)`: Post-processing plugins
- `Plugin(DuplicateBoundaries)`: Post-processing plugins
- `Plugin(Eigenvalues)`: Post-processing plugins
- `Plugin(Eigenvectors)`: Post-processing plugins
- `Plugin(ExtractEdges)`: Post-processing plugins
- `Plugin(ExtractElements)`: Post-processing plugins
- `Plugin(FaultZone)`: Post-processing plugins
- `Plugin(FieldFromAmplitudePhase)`: Post-processing plugins
- `Plugin(Gradient)`: Post-processing plugins
- `Plugin(HarmonicToTime)`: Post-processing plugins
- `Plugin(HomologyComputation)`: Post-processing plugins
- `Plugin(HomologyPostProcessing)`: Post-processing plugins
- `Plugin(Integrate)`: Post-processing plugins
- `Plugin(Isosurface)`: Post-processing plugins
- `Plugin(Lambda2)`: Post-processing plugins
- `Plugin(LongitudeLatitude)`: Post-processing plugins
- `Plugin(MakeSimplex)`: Post-processing plugins
- `Plugin(MathEval)`: Post-processing plugins
- `Plugin(MeshSubEntities)`: Post-processing plugins
- `Plugin(MinMax)`: Post-processing plugins
- `Plugin(ModifyComponent)`: Post-processing plugins
- `Plugin(ModulusPhase)`: Post-processing plugins
- `Plugin(NearestNeighbor)`: Post-processing plugins
- `Plugin(NearToFarField)`: Post-processing plugins
- `Plugin(NewView)`: Post-processing plugins
- `Plugin(Particles)`: Post-processing plugins
- `Plugin(Probe)`: Post-processing plugins
- `Plugin(Remove)`: Post-processing plugins
- `Plugin(Scal2Tens)`: Post-processing plugins
- `Plugin(Scal2Vec)`: Post-processing plugins
- `Plugin(SimplePartition)`: Post-processing plugins
- `Plugin(Skin)`: Post-processing plugins
- `Plugin(Smooth)`: Post-processing plugins
- `Plugin(SphericalRaise)`: Post-processing plugins
- `Plugin(StreamLines)`: Post-processing plugins
- `Plugin(Tetrahedralize)`: Post-processing plugins
- `Plugin(Transform)`: Post-processing plugins
- `Plugin(Triangulate)`: Post-processing plugins
- `Plugin(Warp)`: Post-processing plugins
- `Point (` expression`) = {` expression`,` expression`,` expression`<,` expression`> };`: Points
- `Point | Line {` expression-list`} In Surface {` expression`};`: Miscellaneous mesh commands
- `PostProcessing.AnimationCycle`: Post-processing options list
- `PostProcessing.AnimationDelay`: Post-processing options list
- `PostProcessing.AnimationStep`: Post-processing options list
- `PostProcessing.CombineRemoveOriginal`: Post-processing options list
- `PostProcessing.DoubleClickedGraphPointCommand`: Post-processing options list
- `PostProcessing.DoubleClickedGraphPointX`: Post-processing options list
- `PostProcessing.DoubleClickedGraphPointY`: Post-processing options list
- `PostProcessing.DoubleClickedView`: Post-processing options list
- `PostProcessing.ForceElementData`: Post-processing options list
- `PostProcessing.ForceNodeData`: Post-processing options list
- `PostProcessing.Format`: Post-processing options list
- `PostProcessing.GraphPointCommand`: Post-processing options list
- `PostProcessing.GraphPointX`: Post-processing options list
- `PostProcessing.GraphPointY`: Post-processing options list
- `PostProcessing.HorizontalScales`: Post-processing options list
- `PostProcessing.Link`: Post-processing options list
- `PostProcessing.NbViews`: Post-processing options list
- `PostProcessing.Plugins`: Post-processing options list
- `PostProcessing.Smoothing`: Post-processing options list
- `PostView`: Specifying mesh element sizes
- `Print` char-expression`;`: General commands
- `Print.Background`: General options list
- `Print.CompositeWindows`: General options list
- `Print.DeleteTemporaryFiles`: General options list
- `Print.EpsBestRoot`: General options list
- `Print.EpsCompress`: General options list
- `Print.EpsLineWidthFactor`: General options list
- `Print.EpsOcclusionCulling`: General options list
- `Print.EpsPointSizeFactor`: General options list
- `Print.EpsPS3Shading`: General options list
- `Print.EpsQuality`: General options list
- `Print.Format`: General options list
- `Print.GeoLabels`: General options list
- `Print.GeoOnlyPhysicals`: General options list
- `Print.GifDither`: General options list
- `Print.GifInterlace`: General options list
- `Print.GifSort`: General options list
- `Print.GifTransparent`: General options list
- `Print.Height`: General options list
- `Print.JpegQuality`: General options list
- `Print.JpegSmoothing`: General options list
- `Print.Parameter`: General options list
- `Print.ParameterCommand`: General options list
- `Print.ParameterFirst`: General options list
- `Print.ParameterLast`: General options list
- `Print.ParameterSteps`: General options list
- `Print.PgfExportAxis`: General options list
- `Print.PgfHorizontalBar`: General options list
- `Print.PgfTwoDim`: General options list
- `Print.PostDisto`: General options list
- `Print.PostElement`: General options list
- `Print.PostElementary`: General options list
- `Print.PostEta`: General options list
- `Print.PostGamma`: General options list
- `Print.PostRho`: General options list
- `Print.TexAsEquation`: General options list
- `Print.Text`: General options list
- `Print.Width`: General options list
- `Printf (` char-expression`,` expression-list`) >` char-expression`;`: General commands
- `Printf (` char-expression`,` expression-list`) >>` char-expression`;`: General commands
- `Printf (` char-expression`<,` expression-list`> );`: General commands
- `Rand (` expression`)`: Built-in functions
- real-option`*=` expression`;`: General commands
- real-option`+=` expression`;`: General commands
- real-option`-=` expression`;`: General commands
- real-option`/=` expression`;`: General commands
- real-option`=` expression`;`: General commands
- `Recombine Surface {` expression-list`} | "*" < =` expression`>;`: Miscellaneous mesh commands
- `RefineMesh;`: General commands
- `RelocateMesh Point | Line | Surface {` expression-list`} | "*";`: General commands
- `Restrict`: Specifying mesh element sizes
- `Return`: User-defined macros
- `Reverse Line | Surface {` expression-list`} | "*" ;`: Miscellaneous mesh commands
- `Rotate { {` expression-list`}, {` expression-list`},` expression`} {` transform-list`}`: Transformations
- `Round (` expression`)`: Built-in functions
- `Ruled Surface (` expression`) = {` expression-list`} < In Sphere {` expression`} >;`: Surfaces
- `Save` char-expression`;`: Miscellaneous mesh commands
- `Save View[`expression`]` char-expression`;`: Post-processing commands
- `SetChanged;`: General commands
- `SetName` char-expression`;`: General commands
- `SetNumber(` char-expression`,` expression`);`: General commands
- `SetOrder` expression`;`: General commands
- `SetPartition` expression`{ Point | Line | Surface | Volume {` expression-list`}; ... }`: Miscellaneous mesh commands
- `SetString(` char-expression`,` char-expression`);`: General commands
- `Show` char-expression`;`: Miscellaneous geometry commands
- `Show` char-expression`;`: Miscellaneous mesh commands
- `Sin (` expression`)`: Built-in functions
- `Sinh (` expression`)`: Built-in functions
- `Sleep` expression`;`: General commands
- `Smoother Surface {` expression-list`} =` expression`;`: Miscellaneous mesh commands
- `Solver.AlwaysListen`: Solver options list
- `Solver.AutoArchiveOutputFiles`: Solver options list
- `Solver.AutoCheck`: Solver options list
- `Solver.AutoMergeFile`: Solver options list
- `Solver.AutoMesh`: Solver options list
- `Solver.AutoSaveDatabase`: Solver options list
- `Solver.AutoShowLastStep`: Solver options list
- `Solver.AutoShowViews`: Solver options list
- `Solver.Executable0`: Solver options list
- `Solver.Executable1`: Solver options list
- `Solver.Executable2`: Solver options list
- `Solver.Executable3`: Solver options list
- `Solver.Executable4`: Solver options list
- `Solver.Executable5`: Solver options list
- `Solver.Executable6`: Solver options list
- `Solver.Executable7`: Solver options list
- `Solver.Executable8`: Solver options list
- `Solver.Executable9`: Solver options list
- `Solver.Name0`: Solver options list
- `Solver.Name1`: Solver options list
- `Solver.Name2`: Solver options list
- `Solver.Name3`: Solver options list
- `Solver.Name4`: Solver options list
- `Solver.Name5`: Solver options list
- `Solver.Name6`: Solver options list
- `Solver.Name7`: Solver options list
- `Solver.Name8`: Solver options list
- `Solver.Name9`: Solver options list
- `Solver.OctaveInterpreter`: Solver options list
- `Solver.Plugins`: Solver options list
- `Solver.PythonInterpreter`: Solver options list
- `Solver.RemoteLogin0`: Solver options list
- `Solver.RemoteLogin1`: Solver options list
- `Solver.RemoteLogin2`: Solver options list
- `Solver.RemoteLogin3`: Solver options list
- `Solver.RemoteLogin4`: Solver options list
- `Solver.RemoteLogin5`: Solver options list
- `Solver.RemoteLogin6`: Solver options list
- `Solver.RemoteLogin7`: Solver options list
- `Solver.RemoteLogin8`: Solver options list
- `Solver.RemoteLogin9`: Solver options list
- `Solver.ShowInvisibleParameters`: Solver options list
- `Solver.SocketName`: Solver options list
- `Solver.Timeout`: Solver options list
- `Spline (` expression`) = {` expression-list`};`: Lines
- `Sqrt (` expression`)`: Built-in functions
- string`( {` expression-list`} ) = {` expression-list`};`: General commands
- string`*=` expression`;`: General commands
- string`+=` expression`;`: General commands
- string`+= {` expression-list`};`: General commands
- string`-=` expression`;`: General commands
- string`-= {` expression-list`};`: General commands
- string`/=` expression`;`: General commands
- string`=` char-expression`;`: General commands
- string`=` expression`;`: General commands
- string`= {` expression-list`};`: General commands
- string`= { };`: General commands
- string`[ {` expression-list`} ] *= {` expression-list`};`: General commands
- string`[ {` expression-list`} ] += {` expression-list`};`: General commands
- string`[ {` expression-list`} ] -= {` expression-list`};`: General commands
- string`[ {` expression-list`} ] /= {` expression-list`};`: General commands
- string`[ {` expression-list`} ] = {` expression-list`};`: General commands
- `Structured`: Specifying mesh element sizes
- `Surface Loop (` expression`) = {` expression-list`};`: Surfaces
- `Surface {` expression-list`} In Volume {` expression`};`: Miscellaneous mesh commands
- `Symmetry {` expression-list`} {` transform-list`}`: Transformations
- `SyncModel;`: General commands
- `SystemCall` char-expression`;`: General commands
- `Tan (` expression`)`: Built-in functions
- `Tanh (` expression`)`: Built-in functions
- `Threshold`: Specifying mesh element sizes
- `TotalMemory`: General commands
- `Transfinite Line {` expression-list`} | "*" =` expression`< Using Progression | Bump` expression`>;`: Structured grids
- `Transfinite Surface {` expression-list`} | "*" < = {` expression-list`} > < Left | Right | Alternate | AlternateRight | AlternateLeft > ;`: Structured grids
- `Transfinite Volume {` expression-list`} | "*" < = {` expression-list`} > ;`: Structured grids
- transform: Transformations
- `TransfQuadTri {` expression-list`} | "*";`: Structured grids
- `Translate {` expression-list`} {` transform-list`}`: Transformations
- `View "`string`" {` string`< (` expression-list`) > {` expression-list`}; ... };`: Post-processing commands
- `View.AbscissaRangeType`: Post-processing options list
- `View.AdaptVisualizationGrid`: Post-processing options list
- `View.AngleSmoothNormals`: Post-processing options list
- `View.ArrowSizeMax`: Post-processing options list
- `View.ArrowSizeMin`: Post-processing options list
- `View.Attributes`: Post-processing options list
- `View.AutoPosition`: Post-processing options list
- `View.Axes`: Post-processing options list
- `View.AxesAutoPosition`: Post-processing options list
- `View.AxesFormatX`: Post-processing options list
- `View.AxesFormatY`: Post-processing options list
- `View.AxesFormatZ`: Post-processing options list
- `View.AxesLabelX`: Post-processing options list
- `View.AxesLabelY`: Post-processing options list
- `View.AxesLabelZ`: Post-processing options list
- `View.AxesMaxX`: Post-processing options list
- `View.AxesMaxY`: Post-processing options list
- `View.AxesMaxZ`: Post-processing options list
- `View.AxesMikado`: Post-processing options list
- `View.AxesMinX`: Post-processing options list
- `View.AxesMinY`: Post-processing options list
- `View.AxesMinZ`: Post-processing options list
- `View.AxesTicsX`: Post-processing options list
- `View.AxesTicsY`: Post-processing options list
- `View.AxesTicsZ`: Post-processing options list
- `View.Boundary`: Post-processing options list
- `View.CenterGlyphs`: Post-processing options list
- `View.Clip`: Post-processing options list
- `View.Closed`: Post-processing options list
- `View.Color.Axes`: Post-processing options list
- `View.Color.Background2D`: Post-processing options list
- `View.Color.Hexahedra`: Post-processing options list
- `View.Color.Lines`: Post-processing options list
- `View.Color.Normals`: Post-processing options list
- `View.Color.Points`: Post-processing options list
- `View.Color.Prisms`: Post-processing options list
- `View.Color.Pyramids`: Post-processing options list
- `View.Color.Quadrangles`: Post-processing options list
- `View.Color.Tangents`: Post-processing options list
- `View.Color.Tetrahedra`: Post-processing options list
- `View.Color.Text2D`: Post-processing options list
- `View.Color.Text3D`: Post-processing options list
- `View.Color.Triangles`: Post-processing options list
- `View.ColormapAlpha`: Post-processing options list
- `View.ColormapAlphaPower`: Post-processing options list
- `View.ColormapBeta`: Post-processing options list
- `View.ColormapBias`: Post-processing options list
- `View.ColormapCurvature`: Post-processing options list
- `View.ColormapInvert`: Post-processing options list
- `View.ColormapNumber`: Post-processing options list
- `View.ColormapRotation`: Post-processing options list
- `View.ColormapSwap`: Post-processing options list
- `View.ColorTable`: Post-processing options list
- `View.ComponentMap0`: Post-processing options list
- `View.ComponentMap1`: Post-processing options list
- `View.ComponentMap2`: Post-processing options list
- `View.ComponentMap3`: Post-processing options list
- `View.ComponentMap4`: Post-processing options list
- `View.ComponentMap5`: Post-processing options list
- `View.ComponentMap6`: Post-processing options list
- `View.ComponentMap7`: Post-processing options list
- `View.ComponentMap8`: Post-processing options list
- `View.CustomAbscissaMax`: Post-processing options list
- `View.CustomAbscissaMin`: Post-processing options list
- `View.CustomMax`: Post-processing options list
- `View.CustomMin`: Post-processing options list
- `View.DisplacementFactor`: Post-processing options list
- `View.DoubleClickedCommand`: Post-processing options list
- `View.DrawHexahedra`: Post-processing options list
- `View.DrawLines`: Post-processing options list
- `View.DrawPoints`: Post-processing options list
- `View.DrawPrisms`: Post-processing options list
- `View.DrawPyramids`: Post-processing options list
- `View.DrawQuadrangles`: Post-processing options list
- `View.DrawScalars`: Post-processing options list
- `View.DrawSkinOnly`: Post-processing options list
- `View.DrawStrings`: Post-processing options list
- `View.DrawTensors`: Post-processing options list
- `View.DrawTetrahedra`: Post-processing options list
- `View.DrawTriangles`: Post-processing options list
- `View.DrawVectors`: Post-processing options list
- `View.Explode`: Post-processing options list
- `View.ExternalView`: Post-processing options list
- `View.FakeTransparency`: Post-processing options list
- `View.FileName`: Post-processing options list
- `View.ForceNumComponents`: Post-processing options list
- `View.Format`: Post-processing options list
- `View.GeneralizedRaiseFactor`: Post-processing options list
- `View.GeneralizedRaiseView`: Post-processing options list
- `View.GeneralizedRaiseX`: Post-processing options list
- `View.GeneralizedRaiseY`: Post-processing options list
- `View.GeneralizedRaiseZ`: Post-processing options list
- `View.GlyphLocation`: Post-processing options list
- `View.Group`: Post-processing options list
- `View.Height`: Post-processing options list
- `View.IntervalsType`: Post-processing options list
- `View.Light`: Post-processing options list
- `View.LightLines`: Post-processing options list
- `View.LightTwoSide`: Post-processing options list
- `View.LineType`: Post-processing options list
- `View.LineWidth`: Post-processing options list
- `View.Max`: Post-processing options list
- `View.MaxRecursionLevel`: Post-processing options list
- `View.MaxVisible`: Post-processing options list
- `View.MaxX`: Post-processing options list
- `View.MaxY`: Post-processing options list
- `View.MaxZ`: Post-processing options list
- `View.Min`: Post-processing options list
- `View.MinVisible`: Post-processing options list
- `View.MinX`: Post-processing options list
- `View.MinY`: Post-processing options list
- `View.MinZ`: Post-processing options list
- `View.Name`: Post-processing options list
- `View.NbIso`: Post-processing options list
- `View.NbTimeStep`: Post-processing options list
- `View.NormalRaise`: Post-processing options list
- `View.Normals`: Post-processing options list
- `View.OffsetX`: Post-processing options list
- `View.OffsetY`: Post-processing options list
- `View.OffsetZ`: Post-processing options list
- `View.PointSize`: Post-processing options list
- `View.PointType`: Post-processing options list
- `View.PositionX`: Post-processing options list
- `View.PositionY`: Post-processing options list
- `View.RaiseX`: Post-processing options list
- `View.RaiseY`: Post-processing options list
- `View.RaiseZ`: Post-processing options list
- `View.RangeType`: Post-processing options list
- `View.Sampling`: Post-processing options list
- `View.SaturateValues`: Post-processing options list
- `View.ScaleType`: Post-processing options list
- `View.ShowElement`: Post-processing options list
- `View.ShowScale`: Post-processing options list
- `View.ShowTime`: Post-processing options list
- `View.SmoothNormals`: Post-processing options list
- `View.Stipple`: Post-processing options list
- `View.Stipple0`: Post-processing options list
- `View.Stipple1`: Post-processing options list
- `View.Stipple2`: Post-processing options list
- `View.Stipple3`: Post-processing options list
- `View.Stipple4`: Post-processing options list
- `View.Stipple5`: Post-processing options list
- `View.Stipple6`: Post-processing options list
- `View.Stipple7`: Post-processing options list
- `View.Stipple8`: Post-processing options list
- `View.Stipple9`: Post-processing options list
- `View.Tangents`: Post-processing options list
- `View.TargetError`: Post-processing options list
- `View.TensorType`: Post-processing options list
- `View.Time`: Post-processing options list
- `View.TimeStep`: Post-processing options list
- `View.TransformXX`: Post-processing options list
- `View.TransformXY`: Post-processing options list
- `View.TransformXZ`: Post-processing options list
- `View.TransformYX`: Post-processing options list
- `View.TransformYY`: Post-processing options list
- `View.TransformYZ`: Post-processing options list
- `View.TransformZX`: Post-processing options list
- `View.TransformZY`: Post-processing options list
- `View.TransformZZ`: Post-processing options list
- `View.Type`: Post-processing options list
- `View.UseGeneralizedRaise`: Post-processing options list
- `View.VectorType`: Post-processing options list
- `View.Visible`: Post-processing options list
- `View.Width`: Post-processing options list
- `Volume (` expression`) = {` expression-list`};`: Volumes
- `||`: Operators

#### Footnotes

[1] Note that mixing structured volume grids with unstructured volume grids generated with the default 3D Delaunay algorithm can result, in certain cases, to non-conform surface meshes on their shared boundary. If this happens, you may consider using the frontal algorithm for the unstructured part.

[2] Login and password: `gmsh`.

[3] Login and password: `gmsh`.

[4] Login and password: `gmsh`.

[5] Login and password: `gmsh`.

[6] Nearly all the interactive commands have keyboard shortcuts: see Keyboard shortcuts, or select `Help->Keyboard and Mouse Usage' in the menu. For example, to quickly save a mesh, you can press `Ctrl+Shift+s`.

[7] Login and password: `gmsh`.

[8] If you compile Gmsh without the GUI (see Compiling the source code), this is the only mode you have access to.

[9] Login and password: `gmsh`.

[10] For compatibility with GetDP (http://geuz.org/getdp/), parentheses can be replaced by brackets `[]` in `Str` and `Sprintf`.

[11] Login and password: `gmsh`.

[12] The affectation operators are introduced in General commands.

[13] For compatibility with GetDP (http://geuz.org/getdp/), parentheses can be replaced by brackets `[]`.

[14] For compatibility purposes, the behavior of `newl`, `news`, `newv` and `newreg` can be modified with the `Geometry.OldNewReg` option (see Geometry options list).

[15] R. A. Dwyer, A simple divide-and-conquer algorithm for computing Delaunay triangulations in O(n log n) expected time, In Proceedings of the second annual symposium on computational geometry, Yorktown Heights, 2–4 June 1986.

[16] N. P. Weatherill, The integrity of geometrical boundaries in the two-dimensional Delaunay triangulation, Commun. Appl. Numer. Methods 6(2), pp. 101–109, 1990.

[17] C. Geuzaine and J.-F. Remacle, Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities, International Journal for Numerical Methods in Engineering 79(11), pp. 1309–1331, 2009.

[18] P.-L. George and P. Frey, Mesh generation, Hermes, Lyon, 2000.

[19] S. Rebay, Efficient unstructured mesh generation by means of Delaunay triangulation and Bowyer-Watson algorithm, J. Comput. Phys. 106, pp. 25–138, 1993.

[20] H. Si, Tetgen: a quality tetrahedral mesh generator and three-dimensional Delaunay triangulator, 2004.

[21] J. Schoeberl, Netgen, an advancing front 2d/3d-mesh generator based on abstract rules, Comput. Visual. Sci., 1, pp. 41–52, 1997.

[22] This behaviour was introduced in Gmsh 2.0. In older versions, both the elementary and the physical region numbers would be set to the identification number of the elementary region.

[23] Login and password: `gmsh`.

[24] Login and password: `gmsh`.

[25] Login and password: `gmsh`.

[26] Login and password: `gmsh`.

[27] Login and password: `gmsh`.

[28] Login and password: `gmsh`.

[29] Login and password: `gmsh`.

[30] Login and password: `gmsh`.

[31] Login and password: `gmsh`.